source: ntrip/branches/BNC_2.12/src/bncwindow.cpp @ 8424

Last change on this file since 8424 was 8424, checked in by stuerze, 15 months ago

minor changes

File size: 148.3 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class:      bncWindow
30 *
31 * Purpose:    This class implements the main application window.
32 *
33 * Author:     L. Mervart
34 *
35 * Created:    24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#include "rinex/reqcedit.h"
67#include "rinex/reqcanalyze.h"
68#include "orbComp/sp3Comp.h"
69#ifdef QT_WEBKIT
70#  include "map/bncmapwin.h"
71#endif
72
73using namespace std;
74
75#ifdef GNSSCENTER_PLUGIN
76Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
77#endif
78
79// Constructor
80////////////////////////////////////////////////////////////////////////////
81bncWindow::bncWindow() {
82
83  const static QPalette paletteWhite(QColor(255, 255, 255));
84  const static QPalette paletteGray(QColor(230, 230, 230));
85
86#ifdef GNSSCENTER_PLUGIN
87  BNC_CORE->setConfFileName("");
88#endif
89
90  _caster    = 0;
91  _casterEph = 0;
92
93  _bncFigure     = new bncFigure(this);
94  _bncFigureLate = new bncFigureLate(this);
95  _bncFigurePPP  = new bncFigurePPP(this);
96
97  connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
98          _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
99
100  connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
101  connect(BNC_CORE, SIGNAL(finishedRnxPPP()),    this, SLOT(slotPostProcessingFinished()));
102
103  _runningRealTime    = false;
104  _runningPPP         = false;
105  _runningEdit        = false;
106  _runningQC          = false;
107  _runningSp3Comp     = false;
108  _reqcActionComboBox = 0; // necessary for enableStartStop()
109
110  _mapWin = 0;
111
112  int ww = QFontMetrics(this->font()).width('w');
113
114  static const QStringList labels = QString("account, Streams:   resource loader / mountpoint, decoder, country, lat, long, nmea, ntrip, bytes").split(",");
115
116  setMinimumSize(100*ww, 70*ww);
117
118  setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
119
120  connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
121          this, SLOT(slotWindowMessage(QByteArray,bool)));
122
123  // Create Actions
124  // --------------
125  _actHelp = new QAction(tr("&Help Contents"),this);
126  connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
127
128  _actAbout = new QAction(tr("&About BNC"),this);
129  connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
130
131  _actFlowchart = new QAction(tr("&Flow Chart"),this);
132  connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
133
134  _actFontSel = new QAction(tr("Select &Font"),this);
135  connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
136
137  _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
138  connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
139
140  _actQuit  = new QAction(tr("&Quit"),this);
141  connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
142
143  _actAddMountPoints = new QAction(tr("Add &Stream"),this);
144  connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
145
146  _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
147  connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
148  _actDeleteMountPoints->setEnabled(false);
149
150  _actMapMountPoints = new QAction(tr("&Map"),this);
151  connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
152
153  _actStart = new QAction(tr("Sta&rt"),this);
154  connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
155
156  _actStop = new QAction(tr("Sto&p"),this);
157  connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
158
159  _actwhatsthis= new QAction(tr("Help?=Shift+F1"),this);
160  connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
161
162  CreateMenu();
163  AddToolbar();
164
165  bncSettings settings;
166
167  // Network Options
168  // ---------------
169  _proxyHostLineEdit  = new QLineEdit(settings.value("proxyHost").toString());
170  _proxyPortLineEdit  = new QLineEdit(settings.value("proxyPort").toString());
171
172  connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
173          this, SLOT(slotBncTextChanged()));
174
175  _sslCaCertPathLineEdit   = new QLineEdit(settings.value("sslCaCertPath").toString());
176  _sslIgnoreErrorsCheckBox = new QCheckBox();
177  _sslIgnoreErrorsCheckBox->setCheckState(Qt::CheckState(
178                                          settings.value("sslIgnoreErrors").toInt()));
179
180  // General Options
181  // ---------------
182  _logFileLineEdit    = new QLineEdit(settings.value("logFile").toString());
183  _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
184  _rnxAppendCheckBox  = new QCheckBox();
185  _rnxAppendCheckBox->setCheckState(Qt::CheckState(
186                                    settings.value("rnxAppend").toInt()));
187  _onTheFlyComboBox = new QComboBox();
188  _onTheFlyComboBox->setEditable(false);
189  _onTheFlyComboBox->addItems(QString("no, 1 day,1 hour,5 min,1 min").split(","));
190  int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
191  if (ii != -1) {
192    _onTheFlyComboBox->setCurrentIndex(ii);
193  }
194  _autoStartCheckBox  = new QCheckBox();
195  _autoStartCheckBox->setCheckState(Qt::CheckState(
196                                    settings.value("autoStart").toInt()));
197
198  // RINEX Observations Options
199  // --------------------------
200  _rnxPathLineEdit    = new QLineEdit(settings.value("rnxPath").toString());
201  _rnxIntrComboBox    = new QComboBox();
202  _rnxIntrComboBox->setEditable(false);
203  _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
204  ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
205  if (ii != -1) {
206    _rnxIntrComboBox->setCurrentIndex(ii);
207  }
208  _rnxSamplComboBox    = new QComboBox();
209  _rnxSamplComboBox->setEditable(false);
210  _rnxSamplComboBox->addItems(QString("0.1 sec,1 sec,5 sec,10 sec,15 sec,30 sec,60 sec").split(","));
211  int ij = _rnxSamplComboBox->findText(settings.value("rnxSampl").toString());
212  if (ij != -1) {
213    _rnxSamplComboBox->setCurrentIndex(ij);
214  }
215  _rnxFileCheckBox = new QCheckBox();
216  _rnxFileCheckBox->setCheckState(Qt::CheckState(settings.value("rnxOnlyWithSKL").toInt()));
217  _rnxSkelLineEdit    = new QLineEdit(settings.value("rnxSkel").toString());
218  _rnxSkelLineEdit->setMaximumWidth(5*ww);
219  _rnxScrpLineEdit    = new QLineEdit(settings.value("rnxScript").toString());
220  _rnxV3CheckBox      = new QCheckBox();
221  _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
222  QString hlp = settings.value("rnxV2Priority").toString();
223  if (hlp.isEmpty()) {
224    hlp = "G:12&PWCSLXYN_ G:5&IQX_ R:12&PC_ R:3&IQX_ E:16&BCX_ E:578&IQX_ J:1&SLXCZ_ J:26&SLX_ J:5&IQX_ C:IQX_ I:ABCX_ S:1&C_ S:5&IQX_";
225  }
226  _rnxV2Priority = new QLineEdit(hlp);
227
228  connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
229          this, SLOT(slotBncTextChanged()));
230  connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
231          this, SLOT(slotBncTextChanged()));
232
233  // RINEX Ephemeris Options
234  // -----------------------
235  _ephPathLineEdit    = new QLineEdit(settings.value("ephPath").toString());
236  _ephIntrComboBox    = new QComboBox();
237  _ephIntrComboBox->setEditable(false);
238  _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
239  int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
240  if (jj != -1) {
241    _ephIntrComboBox->setCurrentIndex(jj);
242  }
243  _ephOutPortLineEdit    = new QLineEdit(settings.value("ephOutPort").toString());
244  _ephV3CheckBox = new QCheckBox();
245  _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
246
247  connect(_ephOutPortLineEdit, SIGNAL(textChanged(const QString &)),
248          this, SLOT(slotBncTextChanged()));
249
250  connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
251          this, SLOT(slotBncTextChanged()));
252
253  // Broadcast Corrections Options
254  // -----------------------------
255  _corrPathLineEdit    = new QLineEdit(settings.value("corrPath").toString());
256  _corrIntrComboBox    = new QComboBox();
257  _corrIntrComboBox->setEditable(false);
258  _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
259  int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
260  if (mm != -1) {
261    _corrIntrComboBox->setCurrentIndex(mm);
262  }
263  _corrPortLineEdit    = new QLineEdit(settings.value("corrPort").toString());
264
265  connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
266          this, SLOT(slotBncTextChanged()));
267
268  connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
269          this, SLOT(slotBncTextChanged()));
270
271  // Feed Engine Options
272  // -------------------
273  _outPortLineEdit    = new QLineEdit(settings.value("outPort").toString());
274  _outWaitSpinBox   = new QSpinBox();
275  _outWaitSpinBox->setMinimum(1);
276  _outWaitSpinBox->setMaximum(30);
277  _outWaitSpinBox->setSingleStep(1);
278  _outWaitSpinBox->setSuffix(" sec");
279  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
280  _outSamplComboBox    = new QComboBox();
281  _outSamplComboBox->addItems(QString("0.1 sec,1 sec,5 sec,10 sec,15 sec,30 sec,60 sec").split(","));
282  int nn = _rnxSamplComboBox->findText(settings.value("rnxSampl").toString());
283    if (nn != -1) {
284      _rnxSamplComboBox->setCurrentIndex(nn);
285    }
286  _outFileLineEdit    = new QLineEdit(settings.value("outFile").toString());
287  _outUPortLineEdit   = new QLineEdit(settings.value("outUPort").toString());
288
289  connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
290          this, SLOT(slotBncTextChanged()));
291
292  connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
293          this, SLOT(slotBncTextChanged()));
294
295  // Serial Output Options
296  // ---------------------
297  _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
298  _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
299  _serialBaudRateComboBox = new QComboBox();
300  _serialBaudRateComboBox->addItems(QString("110,300,600,"
301            "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
302  int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
303  if (kk != -1) {
304    _serialBaudRateComboBox->setCurrentIndex(kk);
305  }
306  _serialFlowControlComboBox = new QComboBox();
307  _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
308  kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
309  if (kk != -1) {
310    _serialFlowControlComboBox->setCurrentIndex(kk);
311  }
312  _serialDataBitsComboBox = new QComboBox();
313  _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
314  kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
315  if (kk != -1) {
316    _serialDataBitsComboBox->setCurrentIndex(kk);
317  }
318  _serialParityComboBox   = new QComboBox();
319  _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
320  kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
321  if (kk != -1) {
322    _serialParityComboBox->setCurrentIndex(kk);
323  }
324  _serialStopBitsComboBox = new QComboBox();
325  _serialStopBitsComboBox->addItems(QString("1,2").split(","));
326  kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
327  if (kk != -1) {
328    _serialStopBitsComboBox->setCurrentIndex(kk);
329  }
330  _serialAutoNMEAComboBox  = new QComboBox();
331  _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual GPGGA,Manual GNGGA").split(","));
332  kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
333  if (kk != -1) {
334    _serialAutoNMEAComboBox->setCurrentIndex(kk);
335  }
336  _serialFileNMEALineEdit    = new QLineEdit(settings.value("serialFileNMEA").toString());
337  _serialHeightNMEALineEdit  = new QLineEdit(settings.value("serialHeightNMEA").toString());
338
339  _serialManualNMEASamplingSpinBox = new QSpinBox();
340  _serialManualNMEASamplingSpinBox->setMinimum(0);
341  _serialManualNMEASamplingSpinBox->setMaximum(300);
342  _serialManualNMEASamplingSpinBox->setSingleStep(10);
343  _serialManualNMEASamplingSpinBox->setValue(settings.value("serialManualNMEASampling").toInt());
344  _serialManualNMEASamplingSpinBox->setSuffix(" sec");
345
346  connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
347          this, SLOT(slotBncTextChanged()));
348
349  connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
350          this, SLOT(slotBncTextChanged()));
351
352  // Outages Options
353  // ---------------
354  _adviseObsRateComboBox    = new QComboBox();
355  _adviseObsRateComboBox->setEditable(false);
356  _adviseObsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
357  kk = _adviseObsRateComboBox->findText(settings.value("adviseObsRate").toString());
358  if (kk != -1) {
359    _adviseObsRateComboBox->setCurrentIndex(kk);
360  }
361  _adviseFailSpinBox = new QSpinBox();
362  _adviseFailSpinBox->setMinimum(0);
363  _adviseFailSpinBox->setMaximum(60);
364  _adviseFailSpinBox->setSingleStep(1);
365  _adviseFailSpinBox->setSuffix(" min");
366  _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
367  _adviseRecoSpinBox = new QSpinBox();
368  _adviseRecoSpinBox->setMinimum(0);
369  _adviseRecoSpinBox->setMaximum(60);
370  _adviseRecoSpinBox->setSingleStep(1);
371  _adviseRecoSpinBox->setSuffix(" min");
372  _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
373  _adviseScriptLineEdit    = new QLineEdit(settings.value("adviseScript").toString());
374
375  connect(_adviseObsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
376          this, SLOT(slotBncTextChanged()));
377
378  // Miscellaneous Options
379  // ---------------------
380  _miscMountLineEdit  = new QLineEdit(settings.value("miscMount").toString());
381  _miscPortLineEdit   = new QLineEdit(settings.value("miscPort").toString());
382  _miscIntrComboBox   = new QComboBox();
383  _miscIntrComboBox->setEditable(false);
384  _miscIntrComboBox->addItems(QString(",2 sec,10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
385  int ll = _miscIntrComboBox->findText(settings.value("miscIntr").toString());
386  if (ll != -1) {
387    _miscIntrComboBox->setCurrentIndex(ll);
388  }
389  _miscScanRTCMCheckBox  = new QCheckBox();
390  _miscScanRTCMCheckBox->setCheckState(Qt::CheckState(
391                                    settings.value("miscScanRTCM").toInt()));
392
393  connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
394          this, SLOT(slotBncTextChanged()));
395
396  // Streams
397  // -------
398  _mountPointsTable   = new QTableWidget(0,9);
399
400  _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
401  _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
402  _mountPointsTable->horizontalHeader()->resizeSection(3,9*ww);
403  _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
404  _mountPointsTable->horizontalHeader()->resizeSection(5,7*ww);
405  _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
406  _mountPointsTable->horizontalHeader()->resizeSection(7,5*ww);
407  _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
408  _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
409  _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
410  _mountPointsTable->setHorizontalHeaderLabels(labels);
411  _mountPointsTable->setGridStyle(Qt::NoPen);
412  _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
413  _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
414  _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
415  _mountPointsTable->hideColumn(0);
416  _mountPointsTable->hideColumn(3);
417  connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
418          SLOT(slotSelectionChanged()));
419  populateMountPointsTable();
420
421  _log = new QTextEdit();
422  _log->setReadOnly(true);
423  QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
424  _log->setFont(msFont);
425  _log->document()->setMaximumBlockCount(1000);
426
427  // Combine Corrections
428  // -------------------
429  _cmbTable = new QTableWidget(0,3);
430  _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
431  _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
432  _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
433  _cmbTable->setMaximumWidth(30*ww);
434  _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
435  _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
436  _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
437  _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
438  _cmbTable->horizontalHeader()->setStretchLastSection(true);
439  _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
440
441  _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
442  _cmbUseGlonass     = new QCheckBox();
443  _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
444
445  _cmbSamplSpinBox = new QSpinBox;
446  _cmbSamplSpinBox->setMinimum(10);
447  _cmbSamplSpinBox->setMaximum(60);
448  _cmbSamplSpinBox->setSingleStep(10);
449  _cmbSamplSpinBox->setMaximumWidth(9*ww);
450  _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
451  _cmbSamplSpinBox->setSuffix(" sec");
452
453  QPushButton* addCmbRowButton = new QPushButton("Add Row");
454  QPushButton* delCmbRowButton = new QPushButton("Delete");
455
456  connect(_cmbTable, SIGNAL(itemSelectionChanged()),
457          SLOT(slotBncTextChanged()));
458
459  _cmbMethodComboBox = new QComboBox();
460  _cmbMethodComboBox->setEditable(false);
461  _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
462  int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
463  if (im != -1) {
464    _cmbMethodComboBox->setCurrentIndex(im);
465  }
466
467  int iRow = _cmbTable->rowCount();
468  if (iRow > 0) {
469    enableWidget(true, _cmbMethodComboBox);
470    enableWidget(true, _cmbMaxresLineEdit);
471    enableWidget(true, _cmbSamplSpinBox);
472    enableWidget(true, _cmbUseGlonass);
473  }
474  else {
475    enableWidget(false, _cmbMethodComboBox);
476    enableWidget(false, _cmbMaxresLineEdit);
477    enableWidget(false, _cmbSamplSpinBox);
478    enableWidget(false, _cmbUseGlonass);
479  }
480
481  // Upload Results
482  // -------------
483  _uploadTable = new QTableWidget(0,12);
484  _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
485  _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
486  _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
487  _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
488  _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
489  _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
490  _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
491  _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
492  _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
493  _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
494  _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
495  _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
496  _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
497  _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
498  _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
499  _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
500  _uploadTable->horizontalHeader()->setStretchLastSection(true);
501  _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
502
503  connect(_uploadTable, SIGNAL(itemSelectionChanged()),
504          SLOT(slotBncTextChanged()));
505
506  QPushButton* addUploadRowButton = new QPushButton("Add Row");
507  QPushButton* delUploadRowButton = new QPushButton("Del Row");
508  QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
509  _uploadIntrComboBox = new QComboBox;
510  _uploadIntrComboBox->setEditable(false);
511  _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
512  ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
513  if (ii != -1) {
514    _uploadIntrComboBox->setCurrentIndex(ii);
515  }
516
517  _uploadAntexFile      = new qtFileChooser(0, qtFileChooser::File);
518  _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
519
520  _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
521  _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
522  _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
523  _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
524  _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
525  _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
526  _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
527
528  _uploadSamplSp3SpinBox = new QSpinBox;
529  _uploadSamplSp3SpinBox->setMinimum(0);
530  _uploadSamplSp3SpinBox->setMaximum(15);
531  _uploadSamplSp3SpinBox->setSingleStep(1);
532  _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
533  _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
534  _uploadSamplSp3SpinBox->setSuffix(" min");
535
536  _uploadSamplClkRnxSpinBox = new QSpinBox;
537  _uploadSamplClkRnxSpinBox->setMinimum(0);
538  _uploadSamplClkRnxSpinBox->setMaximum(60);
539  _uploadSamplClkRnxSpinBox->setSingleStep(5);
540  _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
541  _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
542  _uploadSamplClkRnxSpinBox->setSuffix(" sec");
543
544  int iRowT = _uploadTable->rowCount();
545  if (iRowT > 0) {
546    enableWidget(true, _uploadIntrComboBox);
547    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
548    enableWidget(true, _uploadSamplSp3SpinBox);
549    enableWidget(true, _uploadSamplClkRnxSpinBox);
550    enableWidget(true, _uploadAntexFile);
551  }
552  else {
553    enableWidget(false, _uploadIntrComboBox);
554    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
555    enableWidget(false, _uploadSamplSp3SpinBox);
556    enableWidget(false, _uploadSamplClkRnxSpinBox);
557    enableWidget(false, _uploadAntexFile);
558  }
559
560  // Upload RTCM3 Ephemeris
561  // ----------------------
562  _uploadEphHostLineEdit       = new QLineEdit(settings.value("uploadEphHost").toString());
563  _uploadEphPortLineEdit       = new QLineEdit(settings.value("uploadEphPort").toString());
564  _uploadEphPasswordLineEdit   = new QLineEdit(settings.value("uploadEphPassword").toString());
565  _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
566  _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
567  _uploadEphSampleSpinBox      = new QSpinBox;
568  _uploadEphSampleSpinBox->setMinimum(5);
569  _uploadEphSampleSpinBox->setMaximum(60);
570  _uploadEphSampleSpinBox->setSingleStep(5);
571  _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
572  _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
573  _uploadEphSampleSpinBox->setSuffix(" sec");
574  _uploadEphBytesCounter       = new bncBytesCounter;
575
576  // Canvas with Editable Fields
577  // ---------------------------
578  _canvas = new QWidget;
579  setCentralWidget(_canvas);
580
581  _aogroup = new QTabWidget();
582  _aogroup->setElideMode(Qt::ElideNone);
583  _aogroup->setUsesScrollButtons(true);
584  QWidget* pgroup = new QWidget();
585  QWidget* ggroup = new QWidget();
586  QWidget* sgroup = new QWidget();
587  QWidget* egroup = new QWidget();
588  QWidget* agroup = new QWidget();
589  QWidget* cgroup = new QWidget();
590  QWidget* ogroup = new QWidget();
591  QWidget* rgroup = new QWidget();
592  QWidget* sergroup = new QWidget();
593  QWidget* pppGroup1 = new QWidget();
594  QWidget* pppGroup2 = new QWidget();
595  QWidget* pppGroup3 = new QWidget();
596  QWidget* pppGroup4 = new QWidget();
597  QWidget* reqcgroup = new QWidget();
598  QWidget* sp3CompGroup = new QWidget();
599  QWidget* cmbgroup = new QWidget();
600  QWidget* uploadgroup = new QWidget();
601  QWidget* uploadEphgroup = new QWidget();
602  _aogroup->addTab(pgroup,tr("Network"));
603  _aogroup->addTab(ggroup,tr("General"));
604  _aogroup->addTab(ogroup,tr("RINEX Observations"));
605  _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
606  _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
607  _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
608  _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
609  _aogroup->addTab(sgroup,tr("Feed Engine"));
610  _aogroup->addTab(sergroup,tr("Serial Output"));
611  _aogroup->addTab(agroup,tr("Outages"));
612  _aogroup->addTab(rgroup,tr("Miscellaneous"));
613  _aogroup->addTab(pppGroup1,tr("PPP (1)"));
614  _aogroup->addTab(pppGroup2,tr("PPP (2)"));
615  _aogroup->addTab(pppGroup3,tr("PPP (3)"));
616  _aogroup->addTab(pppGroup4,tr("PPP (4)"));
617  _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
618  _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
619  _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
620
621  // Log Tab
622  // -------
623  _loggroup = new QTabWidget();
624  _loggroup->addTab(_log,tr("Log"));
625  _loggroup->addTab(_bncFigure,tr("Throughput"));
626  _loggroup->addTab(_bncFigureLate,tr("Latency"));
627  _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
628
629  // Netowork (Proxy and SSL) Tab
630  // ----------------------------
631  QGridLayout* pLayout = new QGridLayout;
632  pLayout->setColumnMinimumWidth(0,13*ww);
633  _proxyPortLineEdit->setMaximumWidth(9*ww);
634
635  pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
636  pLayout->addWidget(new QLabel("Proxy host"),                               1, 0);
637  pLayout->addWidget(_proxyHostLineEdit,                                     1, 1, 1,10);
638  pLayout->addWidget(new QLabel("Proxy port"),                               2, 0);
639  pLayout->addWidget(_proxyPortLineEdit,                                     2, 1);
640  pLayout->addWidget(new QLabel("Path to SSL certificates"),                 3, 0);
641  pLayout->addWidget(_sslCaCertPathLineEdit,                                 3, 1, 1,10);
642  pLayout->addWidget(new QLabel("Default:  " + bncSslConfig::defaultPath()), 3,11, 1,20);
643  pLayout->addWidget(new QLabel("Ignore SSL authorization errors"),          4, 0);
644  pLayout->addWidget(_sslIgnoreErrorsCheckBox,                               4, 1, 1,10);
645  pLayout->addWidget(new QLabel(""),                                         5, 1);
646  pLayout->setRowStretch(6, 999);
647
648  pgroup->setLayout(pLayout);
649
650  // General Tab
651  // -----------
652  QGridLayout* gLayout = new QGridLayout;
653  gLayout->setColumnMinimumWidth(0,14*ww);
654  _onTheFlyComboBox->setMaximumWidth(9*ww);
655
656  gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, auto-start, and raw file output.<br>"),0, 0, 1, 50);
657  gLayout->addWidget(new QLabel("Logfile (full path)"),          1, 0);
658  gLayout->addWidget(_logFileLineEdit,                           1, 1, 1,20);
659  gLayout->addWidget(new QLabel("Append files"),                 2, 0);
660  gLayout->addWidget(_rnxAppendCheckBox,                         2, 1);
661  gLayout->addWidget(new QLabel("Reread configuration"),         3, 0);
662  gLayout->addWidget(_onTheFlyComboBox,                          3, 1);
663  gLayout->addWidget(new QLabel("Auto start"),                   4, 0);
664  gLayout->addWidget(_autoStartCheckBox,                         4, 1);
665  gLayout->addWidget(new QLabel("Raw output file (full path)"),  5, 0);
666  gLayout->addWidget(_rawOutFileLineEdit,                        5, 1, 1,20);
667  gLayout->addWidget(new QLabel(""),                             6, 1);
668  gLayout->setRowStretch(7, 999);
669
670  ggroup->setLayout(gLayout);
671
672  // RINEX Observations
673  // ------------------
674  QGridLayout* oLayout = new QGridLayout;
675  oLayout->setColumnMinimumWidth(0,14*ww);
676  _rnxIntrComboBox->setMaximumWidth(9*ww);
677  _rnxSamplComboBox->setMaximumWidth(9*ww);
678
679  oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
680  oLayout->addWidget(new QLabel("Directory"),                      1, 0);
681  oLayout->addWidget(_rnxPathLineEdit,                             1, 1, 1, 15);
682  oLayout->addWidget(new QLabel("Interval"),                       2, 0);
683  oLayout->addWidget(_rnxIntrComboBox,                             2, 1);
684  oLayout->addWidget(new QLabel("  Sampling"),                     2, 2, Qt::AlignRight);
685  oLayout->addWidget(_rnxSamplComboBox,                             2, 3, Qt::AlignLeft);
686  oLayout->addWidget(new QLabel("Skeleton extension"),             3, 0);
687  oLayout->addWidget(_rnxSkelLineEdit,                             3, 1, Qt::AlignLeft);
688  oLayout->addWidget(new QLabel("Skeleton mandatory"),             3, 2);
689  oLayout->addWidget(_rnxFileCheckBox,                             3, 3);
690  oLayout->addWidget(new QLabel("Script (full path)"),             4, 0);
691  oLayout->addWidget(_rnxScrpLineEdit,                             4, 1, 1, 15);
692  oLayout->addWidget(new QLabel("Version 2 signal priority"),      5, 0);
693  oLayout->addWidget(_rnxV2Priority,                               5, 1, 1, 15);
694  oLayout->addWidget(new QLabel("Version 3"),                      6, 0);
695  oLayout->addWidget(_rnxV3CheckBox,                               6, 1);
696  oLayout->addWidget(new QLabel(""),                               7, 1);
697  oLayout->setRowStretch(8, 999);
698
699  ogroup->setLayout(oLayout);
700
701  // RINEX Ephemeris
702  // ---------------
703  QGridLayout* eLayout = new QGridLayout;
704  eLayout->setColumnMinimumWidth(0,14*ww);
705  _ephIntrComboBox->setMaximumWidth(9*ww);
706  _ephOutPortLineEdit->setMaximumWidth(9*ww);
707
708  eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
709  eLayout->addWidget(new QLabel("Directory"),                     1, 0);
710  eLayout->addWidget(_ephPathLineEdit,                            1, 1, 1,30);
711  eLayout->addWidget(new QLabel("Interval"),                      2, 0);
712  eLayout->addWidget(_ephIntrComboBox,                            2, 1);
713  eLayout->addWidget(new QLabel("Port"),                          3, 0);
714  eLayout->addWidget(_ephOutPortLineEdit,                         3, 1);
715  eLayout->addWidget(new QLabel("Version 3"),                     4, 0);
716  eLayout->addWidget(_ephV3CheckBox,                              4, 1);
717  eLayout->setRowStretch(5, 999);
718
719  egroup->setLayout(eLayout);
720
721
722  // Broadcast Corrections
723  // ---------------------
724  QGridLayout* cLayout = new QGridLayout;
725  cLayout->setColumnMinimumWidth(0,14*ww);
726  _corrIntrComboBox->setMaximumWidth(9*ww);
727  _corrPortLineEdit->setMaximumWidth(9*ww);
728
729  cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
730  cLayout->addWidget(new QLabel("Directory, ASCII"),              1, 0);
731  cLayout->addWidget(_corrPathLineEdit,                           1, 1, 1,30);
732  cLayout->addWidget(new QLabel("Interval"),                      2, 0);
733  cLayout->addWidget(_corrIntrComboBox,                           2, 1);
734  cLayout->addWidget(new QLabel("Port"),                          3, 0);
735  cLayout->addWidget(_corrPortLineEdit,                           3, 1);
736  cLayout->addWidget(new QLabel(""),                              4, 1);
737  cLayout->setRowStretch(7, 999);
738  cgroup->setLayout(cLayout);
739
740  // Feed Engine
741  // -----------
742  QGridLayout* sLayout = new QGridLayout;
743  sLayout->setColumnMinimumWidth(0,14*ww);
744  _outPortLineEdit->setMaximumWidth(9*ww);
745  _outWaitSpinBox->setMaximumWidth(9*ww);
746  _outSamplComboBox->setMaximumWidth(9*ww);
747  _outUPortLineEdit->setMaximumWidth(9*ww);
748
749  sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
750  sLayout->addWidget(new QLabel("Port"),                            1, 0);
751  sLayout->addWidget(_outPortLineEdit,                              1, 1);
752  sLayout->addWidget(new QLabel("       Wait for full obs epoch"),  1, 2, Qt::AlignRight);
753  sLayout->addWidget(_outWaitSpinBox,                              1, 3, Qt::AlignLeft);
754  sLayout->addWidget(new QLabel("Sampling"),                        2, 0);
755  sLayout->addWidget(_outSamplComboBox,                              2, 1, Qt::AlignLeft);
756  sLayout->addWidget(new QLabel("File (full path)"),                3, 0);
757  sLayout->addWidget(_outFileLineEdit,                              3, 1, 1, 10);
758  sLayout->addWidget(new QLabel("Port (unsynchronized)"),           4, 0);
759  sLayout->addWidget(_outUPortLineEdit,                             4, 1);
760  sLayout->addWidget(new QLabel(""),                                5, 1);
761  sLayout->setRowStretch(6, 999);
762
763  sgroup->setLayout(sLayout);
764
765  // Serial Output
766  // -------------
767  QGridLayout* serLayout = new QGridLayout;
768  serLayout->setColumnMinimumWidth(0,12*ww);
769  _serialBaudRateComboBox->setMaximumWidth(9*ww);
770  _serialFlowControlComboBox->setMaximumWidth(11*ww);
771  _serialDataBitsComboBox->setMaximumWidth(5*ww);
772  _serialParityComboBox->setMaximumWidth(9*ww);
773  _serialStopBitsComboBox->setMaximumWidth(5*ww);
774  _serialAutoNMEAComboBox->setMaximumWidth(14*ww);
775  _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
776  _serialManualNMEASamplingSpinBox->setMaximumWidth(8*ww);
777
778  serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
779  serLayout->addWidget(new QLabel("Mountpoint"),                  1, 0, Qt::AlignLeft);
780  serLayout->addWidget(_serialMountPointLineEdit,                 1, 1, 1, 2);
781  serLayout->addWidget(new QLabel("Port name"),                   2, 0, Qt::AlignLeft);
782  serLayout->addWidget(_serialPortNameLineEdit,                   2, 1, 1, 2);
783  serLayout->addWidget(new QLabel("Baud rate"),                   3, 0, Qt::AlignLeft);
784  serLayout->addWidget(_serialBaudRateComboBox,                   3, 1);
785  serLayout->addWidget(new QLabel("Flow control"),                3, 2, Qt::AlignRight);
786  serLayout->addWidget(_serialFlowControlComboBox,                3, 3);
787  serLayout->addWidget(new QLabel("Data bits"),                   4, 0, Qt::AlignLeft);
788  serLayout->addWidget(_serialDataBitsComboBox,                   4, 1);
789  serLayout->addWidget(new QLabel("Parity"),                      4, 2, Qt::AlignRight);
790  serLayout->addWidget(_serialParityComboBox,                     4, 3);
791  serLayout->addWidget(new QLabel("   Stop bits"),                4, 4, Qt::AlignRight);
792  serLayout->addWidget(_serialStopBitsComboBox,                   4, 5);
793  serLayout->addWidget(new QLabel("NMEA"),                        5, 0);
794  serLayout->addWidget(_serialAutoNMEAComboBox,                   5, 1);
795  serLayout->addWidget(new QLabel("    File (full path)"),        5, 2, Qt::AlignRight);
796  serLayout->addWidget(_serialFileNMEALineEdit,                   5, 3, 1,10);
797  serLayout->addWidget(new QLabel("Height"),                      5,14, Qt::AlignRight);
798  serLayout->addWidget(_serialHeightNMEALineEdit,                 5,15, 1,11);
799  serLayout->addWidget(new QLabel("Sampling"),                    5,25, Qt::AlignRight);
800  serLayout->addWidget(_serialManualNMEASamplingSpinBox,          5,26, 1,12);
801  serLayout->addWidget(new QLabel(""),                            6, 1);
802  serLayout->setRowStretch(7, 999);
803
804  sergroup->setLayout(serLayout);
805
806  // Outages
807  // -------
808  QGridLayout* aLayout = new QGridLayout;
809  aLayout->setColumnMinimumWidth(0,14*ww);
810  _adviseObsRateComboBox->setMaximumWidth(9*ww);
811  _adviseFailSpinBox->setMaximumWidth(9*ww);
812  _adviseRecoSpinBox->setMaximumWidth(9*ww);
813
814  aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
815  aLayout->addWidget(new QLabel("Observation rate"),              1, 0);
816  aLayout->addWidget(_adviseObsRateComboBox,                      1, 1);
817  aLayout->addWidget(new QLabel("Failure threshold"),             2, 0);
818  aLayout->addWidget(_adviseFailSpinBox,                          2, 1);
819  aLayout->addWidget(new QLabel("Recovery threshold"),            3, 0);
820  aLayout->addWidget(_adviseRecoSpinBox,                          3, 1);
821  aLayout->addWidget(new QLabel("Script (full path)"),            4, 0);
822  aLayout->addWidget(_adviseScriptLineEdit,                       4, 1, 1,20);
823  aLayout->addWidget(new QLabel(""),                              5, 1);
824  aLayout->setRowStretch(6, 999);
825
826  agroup->setLayout(aLayout);
827
828  // Miscellaneous
829  // -------------
830  QGridLayout* rLayout = new QGridLayout;
831  rLayout->setColumnMinimumWidth(0,14*ww);
832  _miscIntrComboBox->setMaximumWidth(9*ww);
833  _miscPortLineEdit->setMaximumWidth(9*ww);
834
835  rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
836  rLayout->addWidget(new QLabel("Mountpoint"),                    1, 0);
837  rLayout->addWidget(_miscMountLineEdit,                          1, 1, 1, 7);
838  rLayout->addWidget(new QLabel("Log latency"),                   2, 0);
839  rLayout->addWidget(_miscIntrComboBox,                           2, 1);
840  rLayout->addWidget(new QLabel("Scan RTCM"),                     3, 0);
841  rLayout->addWidget(_miscScanRTCMCheckBox,                       3, 1);
842  rLayout->addWidget(new QLabel("Port"),                          4, 0);
843  rLayout->addWidget(_miscPortLineEdit,                           4, 1);
844  rLayout->addWidget(new QLabel(""),                              5, 1);
845  rLayout->setRowStretch(6, 999);
846
847  rgroup->setLayout(rLayout);
848
849  // PPP
850  // ---
851  _pppWidgets._dataSource->setMaximumWidth(20*ww);
852  _pppWidgets._corrMount->setMaximumWidth(20*ww);
853
854  _pppWidgets._corrFile->setMaximumWidth(35*ww);
855  _pppWidgets._crdFile->setMaximumWidth(35*ww);
856  _pppWidgets._logPath->setMaximumWidth(35*ww);
857  _pppWidgets._snxtroPath->setMaximumWidth(35*ww);
858  _pppWidgets._snxtroIntr->setMaximumWidth(10*ww);
859  _pppWidgets._snxtroAc  ->setMaximumWidth(10*ww);
860  _pppWidgets._snxtroSol ->setMaximumWidth(7*ww);
861
862  QGridLayout* pppLayout1 = new QGridLayout();
863  int ir = 0;
864  pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output."), ir, 0, 1, 7, Qt::AlignLeft);
865  ++ir;
866  pppLayout1->addWidget(new QLabel("Data source"),           ir, 0);
867  pppLayout1->addWidget(_pppWidgets._dataSource,             ir, 1);
868  pppLayout1->addWidget(new QLabel("   RINEX Obs file"),     ir, 3);
869  pppLayout1->addWidget(_pppWidgets._rinexObs,               ir, 4, 1, 3);
870  ++ir;
871  pppLayout1->addWidget(new QLabel("Corrections stream"),    ir, 0);
872  pppLayout1->addWidget(_pppWidgets._corrMount,              ir, 1);
873  pppLayout1->addWidget(new QLabel("   RINEX Nav file"),     ir, 3);
874  pppLayout1->addWidget(_pppWidgets._rinexNav,               ir, 4, 1, 3);
875  ++ir;
876  pppLayout1->addWidget(new QLabel("Corrections file"),      ir, 0);
877  pppLayout1->addWidget(_pppWidgets._corrFile,               ir, 1);
878  pppLayout1->addWidget(new QLabel("   ANTEX file"),         ir, 3);
879  pppLayout1->addWidget(_pppWidgets._antexFile,              ir, 4, 1, 3);
880  ++ir;
881  pppLayout1->addWidget(new QLabel("Coordinates file"),      ir, 0);
882  pppLayout1->addWidget(_pppWidgets._crdFile,                ir, 1);
883  pppLayout1->addWidget(new QLabel("   Version 3 filenames"),ir, 3);
884  pppLayout1->addWidget(_pppWidgets._v3filenames,            ir, 4, 1, 3);
885  ++ir;
886  pppLayout1->addWidget(new QLabel("Logfile directory"),     ir, 0);
887  pppLayout1->addWidget(_pppWidgets._logPath,                ir, 1);
888  pppLayout1->addWidget(new QLabel("   NMEA directory"),     ir, 3);
889  pppLayout1->addWidget(_pppWidgets._nmeaPath,               ir, 4, 1, 3);
890  ++ir;
891  pppLayout1->addWidget(new QLabel("SNX TRO directory"),     ir, 0);
892  pppLayout1->addWidget(_pppWidgets._snxtroPath,             ir, 1);
893  pppLayout1->addWidget(new QLabel("   SNX TRO interval"),   ir, 3);
894  pppLayout1->addWidget(_pppWidgets._snxtroIntr,             ir, 4);
895  pppLayout1->addWidget(new QLabel("   SNX TRO sampling"),   ir, 5);
896  pppLayout1->addWidget(_pppWidgets._snxtroSampl,            ir, 6, Qt::AlignRight);
897  ++ir;
898  pppLayout1->addWidget(new QLabel("   SNX TRO AC"),         ir, 3);
899  pppLayout1->addWidget(_pppWidgets._snxtroAc,               ir, 4);
900  pppLayout1->addWidget(new QLabel("   SNX TRO solution")    ,ir, 5);
901  pppLayout1->addWidget(_pppWidgets._snxtroSol,              ir, 6, Qt::AlignRight);
902  pppLayout1->setRowStretch(ir, 999);
903
904  pppGroup1->setLayout(pppLayout1);
905
906  QVBoxLayout* pppLayout2 = new QVBoxLayout();
907  pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
908  pppLayout2->addWidget(_pppWidgets._staTable, 99);
909  QHBoxLayout* pppLayout2sub = new QHBoxLayout();
910  pppLayout2sub->addWidget(_pppWidgets._addStaButton);
911  pppLayout2sub->addWidget(_pppWidgets._delStaButton);
912  pppLayout2sub->addStretch(99);
913
914  pppLayout2->addLayout(pppLayout2sub);
915
916  pppGroup2->setLayout(pppLayout2);
917
918  QGridLayout* pppLayout3 = new QGridLayout();
919  ir = 0;
920  pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
921  ++ir;
922  pppLayout3->addWidget(new QLabel("GPS LCs"),              ir, 0, Qt::AlignLeft);
923  pppLayout3->addWidget(_pppWidgets._lcGPS,                 ir, 1);
924  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 2);
925  pppLayout3->addWidget(new QLabel("Sigma C1"),             ir, 3, Qt::AlignLeft);
926  pppLayout3->addWidget(_pppWidgets._sigmaC1,               ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
927  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 5);
928  pppLayout3->addWidget(new QLabel("Sigma L1"),             ir, 6, Qt::AlignLeft);
929  pppLayout3->addWidget(_pppWidgets._sigmaL1,               ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
930  ++ir;
931  pppLayout3->addWidget(new QLabel("GLONASS LCs"),          ir, 0, Qt::AlignLeft);
932  pppLayout3->addWidget(_pppWidgets._lcGLONASS,             ir, 1);
933  pppLayout3->addWidget(new QLabel("Max Res C1"),           ir, 3, Qt::AlignLeft);
934  pppLayout3->addWidget(_pppWidgets._maxResC1,              ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
935  pppLayout3->addWidget(new QLabel("Max Res L1"),           ir, 6, Qt::AlignLeft);
936  pppLayout3->addWidget(_pppWidgets._maxResL1,              ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
937  ++ir;
938  pppLayout3->addWidget(new QLabel("Galileo LCs"),          ir, 0, Qt::AlignLeft);
939  pppLayout3->addWidget(_pppWidgets._lcGalileo,             ir, 1);
940  pppLayout3->addWidget(new QLabel("Ele Wgt Code"),         ir, 3, Qt::AlignLeft);
941  pppLayout3->addWidget(_pppWidgets._eleWgtCode,            ir, 4);
942  pppLayout3->addWidget(new QLabel("Ele Wgt Phase"),        ir, 6, Qt::AlignLeft);
943  pppLayout3->addWidget(_pppWidgets._eleWgtPhase,           ir, 7);
944  ++ir;
945  pppLayout3->addWidget(new QLabel("BDS LCs"),              ir, 0, Qt::AlignLeft);
946  pppLayout3->addWidget(_pppWidgets._lcBDS,                 ir, 1);
947  pppLayout3->addWidget(new QLabel("Min # of Obs"),         ir, 3, Qt::AlignLeft);
948  pppLayout3->addWidget(_pppWidgets._minObs,                ir, 4);
949  pppLayout3->addWidget(new QLabel("Min Elevation"),        ir, 6, Qt::AlignLeft);
950  pppLayout3->addWidget(_pppWidgets._minEle,                ir, 7);
951  ++ir;
952  pppLayout3->addWidget(new QLabel("Wait for clock corr."), ir, 0, Qt::AlignLeft);
953  pppLayout3->addWidget(_pppWidgets._corrWaitTime,          ir, 1);
954  pppLayout3->addWidget(new QLabel("Seeding (sec)"),        ir, 3, Qt::AlignLeft);
955  pppLayout3->addWidget(_pppWidgets._seedingTime,           ir, 4);
956  ++ir;
957  pppLayout3->addWidget(new QLabel(""),                     ir, 8);
958  pppLayout3->setColumnStretch(8, 999);
959  ++ir;
960  pppLayout3->addWidget(new QLabel(""),                      ir, 1);
961  pppLayout3->setRowStretch(ir, 999);
962
963  pppGroup3->setLayout(pppLayout3);
964
965  // ------------------------
966  connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
967  _pppWidgets._mapSpeedSlider->setMinimumWidth(33*ww);
968  _pppWidgets._audioResponse->setMaximumWidth(8*ww);
969
970  QGridLayout* pppLayout4 = new QGridLayout();
971  ir = 0;
972  pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
973  ++ir;
974  pppLayout4->addWidget(new QLabel("PPP Plot"),                          ir, 0, Qt::AlignLeft);
975  pppLayout4->addWidget(_pppWidgets._plotCoordinates,                    ir, 1, Qt::AlignLeft);
976  pppLayout4->addWidget(new QLabel("Mountpoint"),                        ir, 2, 1, 10, Qt::AlignLeft);
977  pppLayout4->addWidget(_pppWidgets._audioResponse,                      ir, 4, Qt::AlignLeft);
978  pppLayout4->addWidget(new QLabel("Audio response"),                    ir, 5, Qt::AlignRight);
979
980  ++ir;
981  pppLayout4->addWidget(new QLabel("Track map"),                         ir, 0, Qt::AlignLeft);
982  pppLayout4->addWidget(_pppWidgets._mapWinButton,                       ir, 1, Qt::AlignLeft);
983  pppLayout4->addWidget(new QLabel("OSM"),                               ir, 2, Qt::AlignLeft);
984  pppLayout4->addWidget(_pppWidgets._useOpenStreetMap,                   ir, 3, Qt::AlignLeft);
985  pppLayout4->addWidget(new QLabel("Google"),                            ir, 3, Qt::AlignRight);
986  pppLayout4->addWidget(_pppWidgets._useGoogleMap,                       ir, 4, Qt::AlignLeft);
987  ++ir;
988  pppLayout4->addWidget(new QLabel("Dot-properties"),                    ir, 0, Qt::AlignLeft);
989  pppLayout4->addWidget(_pppWidgets._mapWinDotSize,                      ir, 1, Qt::AlignLeft);
990  pppLayout4->addWidget(new QLabel("Size    "),                          ir, 2, Qt::AlignLeft);
991  pppLayout4->addWidget(_pppWidgets._mapWinDotColor,                     ir, 3, Qt::AlignLeft);
992  pppLayout4->addWidget(new QLabel("Color"),                             ir, 4, Qt::AlignLeft);
993  ++ir;
994  pppLayout4->addWidget(new QLabel("Post-processing speed"),             ir, 0, Qt::AlignLeft);
995  pppLayout4->addWidget(_pppWidgets._mapSpeedSlider,                     ir, 1, 1, 20, Qt::AlignLeft);
996  ++ir;
997  pppLayout4->addWidget(new QLabel(""),                                  ir, 1);
998  pppLayout4->setRowStretch(ir, 999);
999
1000  pppGroup4->setLayout(pppLayout4);
1001
1002  // Reqc Processing
1003  // ---------------
1004  _reqcActionComboBox = new QComboBox();
1005  _reqcActionComboBox->setEditable(false);
1006  _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1007  int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1008  if (ik != -1) {
1009    _reqcActionComboBox->setCurrentIndex(ik);
1010  }
1011  connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1012          this, SLOT(slotBncTextChanged()));
1013
1014  QGridLayout* reqcLayout = new QGridLayout;
1015  _reqcActionComboBox->setMinimumWidth(15*ww);
1016  _reqcActionComboBox->setMaximumWidth(20*ww);
1017
1018  _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1019  _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1020
1021  _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1022  _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1023  _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1024  _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1025  _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1026  _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1027  _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1028
1029  connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1030          this, SLOT(slotBncTextChanged()));
1031
1032  _reqcLogSummaryOnly = new QCheckBox();
1033  _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1034
1035  ir = 0;
1036  reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1037  ++ir;
1038  reqcLayout->addWidget(new QLabel("Action"),                    ir, 0);
1039  reqcLayout->addWidget(_reqcActionComboBox,                     ir, 1);
1040  _reqcEditOptionButton = new QPushButton("Set Edit Options");
1041  _reqcEditOptionButton->setMinimumWidth(15*ww);
1042  _reqcEditOptionButton->setMaximumWidth(20*ww);
1043
1044  reqcLayout->addWidget(_reqcEditOptionButton,                   ir, 3);
1045  ++ir;
1046  reqcLayout->addWidget(new QLabel("Input files (full path)"),   ir, 0);
1047  reqcLayout->addWidget(_reqcObsFileChooser,                     ir, 1);
1048  _reqcObsFileChooser->setMaximumWidth(40*ww);
1049  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1050  reqcLayout->addWidget(_reqcNavFileChooser,                     ir, 3);
1051  _reqcNavFileChooser->setMaximumWidth(40*ww);
1052  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1053  ++ir;
1054  reqcLayout->addWidget(new QLabel("Output file (full path)"),   ir, 0);
1055  reqcLayout->addWidget(_reqcOutObsLineEdit,                     ir, 1);
1056  _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1057  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1058  reqcLayout->addWidget(_reqcOutNavLineEdit,                     ir, 3);
1059  _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1060  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1061  ++ir;
1062  reqcLayout->addWidget(new QLabel("Logfile"),                   ir, 0);
1063  reqcLayout->addWidget(_reqcOutLogLineEdit,                     ir, 1);
1064  _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1065  reqcLayout->addWidget(new QLabel("  Summary only"),            ir, 2);
1066  reqcLayout->addWidget(_reqcLogSummaryOnly,                     ir, 3);
1067  ++ir;
1068  reqcLayout->addWidget(new QLabel("Plots for signals"),         ir, 0);
1069  reqcLayout->addWidget(_reqcSkyPlotSignals,                     ir, 1);
1070  _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1071  ++ir;
1072  reqcLayout->addWidget(new QLabel("Directory for plots"),       ir, 0);
1073  reqcLayout->addWidget(_reqcPlotDirLineEdit,                    ir, 1);
1074  _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1075  ++ir;
1076  reqcLayout->setRowStretch(ir, 999);
1077
1078  reqcLayout->setColumnMinimumWidth(2, 8*ww);
1079  reqcLayout->setColumnMinimumWidth(4, 8*ww);
1080
1081  reqcgroup->setLayout(reqcLayout);
1082
1083  connect(_reqcEditOptionButton, SIGNAL(clicked()),
1084          this, SLOT(slotReqcEditOption()));
1085
1086  QGridLayout* sp3CompLayout = new QGridLayout;
1087
1088  _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1089  _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1090  _sp3CompFileChooser->setMinimumWidth(15*ww);
1091  _sp3CompFileChooser->setMaximumWidth(40*ww);
1092
1093  _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1094  _sp3CompExclude->setMinimumWidth(18*ww);
1095  _sp3CompExclude->setMaximumWidth(18*ww);
1096
1097  _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1098  _sp3CompLogLineEdit->setMinimumWidth(18*ww);
1099  _sp3CompLogLineEdit->setMaximumWidth(18*ww);
1100
1101  ir = 0;
1102  sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"),  ir, 0, 1, 40);
1103  ++ir;
1104  sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"),  ir, 0, Qt::AlignLeft);
1105  sp3CompLayout->addWidget(_sp3CompFileChooser,                        ir, 1, 1, 20);
1106  ++ir;
1107  sp3CompLayout->addWidget(new QLabel("Exclude satellites"),           ir, 0, Qt::AlignLeft);
1108  sp3CompLayout->addWidget(_sp3CompExclude,                            ir, 1, Qt::AlignRight);
1109  ++ir;
1110  sp3CompLayout->addWidget(new QLabel("Logfile"),                      ir, 0, Qt::AlignLeft);
1111  sp3CompLayout->addWidget(_sp3CompLogLineEdit,                        ir, 1, Qt::AlignRight);
1112  ++ir;
1113  sp3CompLayout->addWidget(new QLabel(""),                             ir, 1);
1114  ++ir;
1115  sp3CompLayout->setRowStretch(ir, 999);
1116
1117  sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1118  sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1119
1120  sp3CompGroup->setLayout(sp3CompLayout);
1121
1122  connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1123          this, SLOT(slotBncTextChanged()));
1124
1125  // Combine Corrections
1126  // -------------------
1127  QGridLayout* cmbLayout = new QGridLayout;
1128
1129  populateCmbTable();
1130  cmbLayout->addWidget(_cmbTable,                                            0, 0, 8, 3);
1131  cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1132  cmbLayout->addWidget(addCmbRowButton,                                      2, 6);
1133  cmbLayout->addWidget(delCmbRowButton,                                      2, 7);
1134  cmbLayout->addWidget(new QLabel("Method"),                                 3, 6, Qt::AlignRight);
1135  cmbLayout->addWidget(_cmbMethodComboBox,                                   3, 7);
1136  cmbLayout->addWidget(new QLabel(" Maximal residuum"),                      4, 6, Qt::AlignRight);
1137  cmbLayout->addWidget(_cmbMaxresLineEdit,                                   4, 7, Qt::AlignRight);
1138  cmbLayout->addWidget(new QLabel("Sampling"),                               5, 6, Qt::AlignRight);
1139  cmbLayout->addWidget(_cmbSamplSpinBox,                                     5, 7);
1140  cmbLayout->addWidget(new QLabel("   Use GLONASS"),                         6, 6, Qt::AlignRight);
1141  cmbLayout->addWidget(_cmbUseGlonass,                                       6, 7);
1142  cmbLayout->setRowStretch(7, 999);
1143
1144  connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1145  connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1146
1147  cmbgroup->setLayout(cmbLayout);
1148
1149  // Upload Layout (Clocks)
1150  // ----------------------
1151  QGridLayout* uploadHlpLayout = new QGridLayout();
1152
1153  connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1154  connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1155  connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1156
1157  uploadHlpLayout->addWidget(addUploadRowButton,                  0, 0);
1158  uploadHlpLayout->addWidget(delUploadRowButton,                  0, 1);
1159  uploadHlpLayout->addWidget(new QLabel("Interval"),              0, 2, Qt::AlignRight);
1160  uploadHlpLayout->addWidget(_uploadIntrComboBox,                 0, 3);
1161  uploadHlpLayout->addWidget(new QLabel("     Sampling:    Orb"), 0, 4, Qt::AlignRight);
1162  uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox,      0, 5);
1163  uploadHlpLayout->addWidget(new QLabel("SP3"),                   0, 6, Qt::AlignRight);
1164  uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox,              0, 7);
1165  uploadHlpLayout->addWidget(new QLabel("RNX"),                   0, 8, Qt::AlignRight);
1166  uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox,           0, 9);
1167  uploadHlpLayout->addWidget(setUploadTrafoButton,                0,10);
1168  uploadHlpLayout->addWidget(new QLabel("ANTEX file"),            1, 0, Qt::AlignLeft);
1169  uploadHlpLayout->addWidget(_uploadAntexFile,                    1, 1, 1, 4);
1170
1171  QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1172  populateUploadTable();
1173
1174  uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1175  uploadLayout->addWidget(_uploadTable);
1176  uploadLayout->addLayout(uploadHlpLayout);
1177
1178  uploadgroup->setLayout(uploadLayout);
1179
1180  // Upload Layout (Ephemeris)
1181  // -------------------------
1182  QGridLayout* uploadLayoutEph = new QGridLayout;
1183
1184  uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1185  _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1186  _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1187  _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1188
1189  uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"), 0, 0, 1, 50);
1190  uploadLayoutEph->addWidget(new QLabel("Host"),                  1, 0);
1191  uploadLayoutEph->addWidget(_uploadEphHostLineEdit,              1, 1, 1, 3);
1192  uploadLayoutEph->addWidget(new QLabel("  Port"),                1, 4, Qt::AlignRight);
1193  uploadLayoutEph->addWidget(_uploadEphPortLineEdit,              1, 5, 1, 1);
1194  uploadLayoutEph->addWidget(new QLabel("Mountpoint           "), 2, 0);
1195  uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit,        2, 1);
1196  uploadLayoutEph->addWidget(new QLabel("          Password"),    2, 2, Qt::AlignRight);
1197  uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit,          2, 3);
1198  uploadLayoutEph->addWidget(new QLabel("Sampling"),              3, 0);
1199  uploadLayoutEph->addWidget(_uploadEphSampleSpinBox,             3, 1);
1200  uploadLayoutEph->addWidget(new QLabel("Uploaded"),              4, 0);
1201  uploadLayoutEph->addWidget(_uploadEphBytesCounter,              4, 1);
1202  uploadLayoutEph->setRowStretch(5, 999);
1203
1204  uploadEphgroup->setLayout(uploadLayoutEph);
1205
1206  connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1207          this, SLOT(slotBncTextChanged()));
1208
1209  // Main Layout
1210  // -----------
1211  QGridLayout* mLayout = new QGridLayout;
1212  _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1213  mLayout->addWidget(_aogroup,            0,0);
1214  mLayout->addWidget(_mountPointsTable,   1,0);
1215  _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1216  mLayout->addWidget(_loggroup,           2,0);
1217
1218  _canvas->setLayout(mLayout);
1219
1220  // WhatsThis, Network
1221  // ------------------
1222  _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1223  _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1224  _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure whether this is supported by the involved Ntrip Broadcaster.</p><p>Note that SSL communication is usually done over port 443.</p>"));
1225  _sslIgnoreErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization errors' if you don't want to be bothered with this.</p>"));
1226
1227  // WhatsThis, General
1228  // ------------------
1229  _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path for that is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date.</p>"));
1230  _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and file content already available under the same name will be overwritten. However, users might want to append already existing files following a regular restart or a crash of BNC or its platform.</p><p>Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1231  _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, five minutes, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately via button 'Save & Reread Configuration'.</p>"));
1232  _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1233  _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p><p>This option is primarily meant for debugging purposes.</p>"));
1234
1235  // WhatsThis, RINEX Observations
1236  // -----------------------------
1237  _rnxPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where the RINEX Observation files will be stored.</p><p>If the specified directory does not exist, BNC will not create RINEX Observation files.</p>"));
1238  _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1239  _rnxSamplComboBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds. </p>"));
1240  _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal RINEX skeleton files that contain the RINEX header records you would like to include. You can derive a skeleton file from information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' skl or SKL is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream. In case of 'SKL'/'skl' the 4-char ID forming the base name has to be written in upper/lower cases. </p>"));
1241  _rnxFileCheckBox->setWhatsThis(tr("<p>Tick check box 'Skeleton mandatory' in case you want that RINEX files are only produced if skeleton files are available for BNC. If no skeleton file is available for a particular source then no RINEX Observation file will be produced from the affected stream.</p><p>Note that a skeleton file contains RINEX header information such as receiver and antenna types. In case of stream conversion to RINEX Version 3, a skeleton file should also contain information on potentially available observation types. A missing skeleton file will therefore enforce BNC to only save a default set of RINEX 3 observation types.</p>"));
1242  _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is finally saved, you may want to compress, copy or upload it immediately, for example via FTP. BNC allows you to execute a script/batch file to carry out such operation.</p><p>Specify the full path of a script or batch file. BNC will pass the full RINEX Observation file path to the script as command line parameter (%1 on Windows systems, $1 on Unix/Linux/Mac systems).</p>"));
1243  _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified as equal for all systems, as system specific or as system and freq. specific. For example: </li><ul><li>'CWPX_?' (General signal priorities valid for all GNSS) </li><li>'C:IQX I:ABCX' (System specific signal priorities for BDS and IRNSS) </li><li>'G:12&PWCSLXYN G:5&IQX R:12&PC R:3&IQX' (System and frequency specific signal priorities) </li></ul>Default is the following priority list 'G:12&PWCSLXYN_ G:5&IQX_ R:12&PC_ R:3&IQX_ E:16&BCX_ E:578&IQX_ J:1&SLXCZ_ J:26&SLX_ J:5&IQX_ C:IQX_ I:ABCX_ S:1&C_ S:5&IQX_'.</p>"));
1244  _rnxV3CheckBox->setWhatsThis(tr("<p>The default format for RINEX Observation files is RINEX Version 2.</p><p>Select 'Version 3' if you want to save observations in RINEX Version 3 format.</p>"));
1245
1246  // WhatsThis, RINEX Ephemeris
1247  // --------------------------
1248  _ephPathLineEdit->setWhatsThis(tr("<p>Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files.</p><p>If the specified directory does not exist, BNC will not create RINEX Navigation files.</p>"));
1249  _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1250  _ephOutPortLineEdit->setWhatsThis(tr("<p>BNC can produce ephemeris data in RINEX Navigation ASCII format on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1251  _ephV3CheckBox->setWhatsThis(tr("<p>The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.</p><p>Select 'Version 3' if you want to output ephemeris in RINEX Version 3 format.</p>"));
1252
1253  // WhatsThis, RINEX Editing & QC
1254  // -----------------------------
1255  _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX Version 2 or 3 files or to perform a Quality Check (QC) and 'Analyze' data following UNAVCO's famous 'teqc' program.</p>"));
1256  _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX Version 2 or 3 files.</p>"));
1257  _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to input observation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory.</p>"));
1258  _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to input navigation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory.</p>"));
1259  _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Observation output file.</p><p>Default is an empty option field, meaning that no RINEX Observation output file will be produced.</p>"));
1260  _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Navigation output file.</p><p>Default is an empty option field, meaning that no RINEX Navigation output file will be produced.</p>"));
1261  _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced.</p>"));
1262  _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information.</p>"));
1263  _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk.</p>"));
1264  _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for navigation systems must be separated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 I:5&9'. Specifying an empty option string would be overruled by this default.</p>"));
1265
1266  // WhatsThis, SP3 Comparison
1267  // -------------------------
1268  _sp3CompFileChooser->setWhatsThis(tr("<p>BNC can compare two SP3 files containing GNSS satellite orbit and clock information.</p></p>Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma.</p>"));
1269  _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparison. Example:<p>G04,G31,R</p><p>This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparison.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison.</p>"));
1270  _sp3CompLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile saving comparison results.</p><p>Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless.</p>"));
1271
1272  // WhatsThis, Broadcast Corrections
1273  // --------------------------------
1274  _corrPathLineEdit->setWhatsThis(tr("<p>Specify a directory for saving Broadcast Ephemeris Correction files.</p><p>If the specified directory does not exist, BNC will not create the files.</p>"));
1275  _corrPortLineEdit->setWhatsThis(tr("<p>BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1276  _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of Broadcast Ephemeris Correction files.</p>"));
1277
1278  // WhatsThis, Feed Engine
1279  // ----------------------
1280  _outPortLineEdit->setWhatsThis(tr("<p>BNC can produce synchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1281  _outWaitSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds.</p><p>A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or product.</p>"));
1282  _outSamplComboBox->setWhatsThis(tr("<p>Select a synchronized observation sampling interval in seconds. </p>"));
1283  _outFileLineEdit->setWhatsThis(tr("<p>Specify the full path to a file where synchronized observations are saved in plain ASCII format.</p><p>Beware that the size of this file can rapidly increase depending on the number of incoming streams.</p>"));
1284  _outUPortLineEdit->setWhatsThis(tr("<p>BNC can produce unsynchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1285
1286  // WhatsThis, Serial Output
1287  // ------------------------
1288  _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream content, the receiver may use it for example for Differential GNSS, Precise Point Positioning or any other purpose supported by its firmware.</p>"));
1289  _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows:       COM1, COM2<br>Linux:         /dev/ttyS0, /dev/ttyS1<br>FreeBSD:       /dev/ttyd0, /dev/ttyd1<br>Digital Unix:  /dev/tty01, /dev/tty02<br>HP-UX:         /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX:      /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that before you start BNC, you must plug a serial cable in the port defined here.</p>"));
1290  _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Using a high baud rate is recommended.</p>"));
1291  _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1292  _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1293  _serialParityComboBox->setWhatsThis(tr("<p>Select a 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. The parity is often set to 'NONE'.</p>"));
1294  _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1295  _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtual Reference Station' (VRS) concept which requires the receiver to send approximate position information to the Ntrip Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the Ntrip Broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GGA from your serial connected receiver to the Ntrip Broadcaster and/or save them in a file.</p><p>Select 'Manual GPGGA' or 'Manual GNGGA' if you want BNC to produce and upload GPGGA or GNGGA NMEA messages to the Ntrip Broadcaster because your serial connected receiver doesn't generate these messages. A Talker ID 'GP' preceding the GGA string stands for GPS solutions while a Talker ID 'GN' stands for multi constellation solutions.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'nmea' stream attribute set to 'yes'. This attribute is either extracted from the Ntrip Broadcaster's source-table or introduced by the user via editing the BNC configuration file.</p>"));
1296  _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk.</p>"));
1297  _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced by option 'Mountpoint'. Together with the latitude and longitude from the source-table, the height information is used to build GGA messages to be sent to the Ntrip Broadcaster.</p><p>For adjusting latitude and longitude values of a VRS stream given in the 'Streams' canvas, you can double click the latitude/longitude data fields, specify appropriate values and then hit Enter.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual GPGGA' or 'Manual GNGGA' respectively.</p>"));
1298  _serialManualNMEASamplingSpinBox->setWhatsThis(tr("<p>Select a sampling interval in seconds for manual generation and upload of NMEA GGA sentences.</p><p>A sampling rate of '0' means, the a GGA sentence will be send only once to initialize the requested VRS stream. Note that some VRS systems need GGA sentences at regular intervals.</p>"));
1299
1300  // WhatsThis, Outages
1301  // ------------------
1302  _adviseObsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>Default is an empty option field, meaning that you don't want BNC to report on stream failures or recoveries when exceeding a threshold time span.</p>"));
1303  _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1304  _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1305  _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and a comment 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider.</p><p>An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1306
1307  // WhatsThis, Miscellaneous
1308  // ------------------------
1309  _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1310  _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1311  _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1312  _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function.</p>"));
1313
1314  // WhatsThis, PPP (1)
1315  // ------------------
1316  _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull a RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from Ntrip Broadcaster <u>products.igs-ip.net</u>.<br></li><li>Post processing PPP requires RINEX Observation files, RINEX Navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations.</p>"));
1317  _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX Observation file.</p>"));
1318  _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX Navigation file.</p>"));
1319  _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p><p>If you don't specify a corrections stream via this option, BNC will fall back to Single Point Positioning (SPP, positioning from observations and Broadcast Ephemeris only) instead of doing PPP.</p>"));
1320  _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP.</p>"));
1321  _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations.</p>"));
1322  _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:<p><ul><li>Specify the station either by<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode), or</li><li>the 4-charater station ID of the RINEX Observations file (when in post processing PPP mode).</li></ul></li><li>Approximate X,Y,Z coordinate of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>North, East and Up component of antenna eccentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li><li>Receiver type following the naming conventions for IGS equipment.</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.</p>"));
1323  _pppWidgets._v3filenames->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames for PPP logfiles, NMEA files and SINEX Troposphere files following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard. The file content is not affected by this option. It only concerns the filenames.</p>"));
1324  _pppWidgets._logPath->setWhatsThis(tr("<p>Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no PPP logfiles shall be produced.</p>"));
1325  _pppWidgets._nmeaPath->setWhatsThis(tr("<p>Specify a directory for saving coordinates in daily NMEA files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no NMEA file shall be produced.</p>"));
1326  _pppWidgets._snxtroPath->setWhatsThis(tr("<p>Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no SINEX Troposphere files shall be produced.</p>"));
1327  _pppWidgets._snxtroIntr->setWhatsThis(tr("<p>Select a length for SINEX Troposphere files.</p><p>Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'.</p>"));
1328  _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere parameters.</p>"));
1329  _pppWidgets._snxtroAc->setWhatsThis(tr("<p>Specify a 3-character abbreviation describing you as the generating Analysis Center (AC) in your SINEX troposphere files.</p>"));
1330  _pppWidgets._snxtroSol->setWhatsThis(tr("<p>Specify a 4-character solution ID to allow a distingtion between different solutions per AC.</p>"));
1331
1332  // WhatsThis, PPP (3)
1333  // ------------------
1334  _pppWidgets._lcGPS->setWhatsThis(tr("<p>Specify which kind of GPS observations you want to use and on which kind of ionosphere-free linear combination of GPS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Note that most geodetic receivers support the observation of GPS code and phase data. Hence specifying 'P3&L3' would be a good choice when processing data from such a receiver.</p><p>Specifying 'no' means that you don't want BNC to use GPS data.</p>"));
1335  _pppWidgets._lcGLONASS->setWhatsThis(tr("<p>Specify which kind of GLONASS observations you want to use and on which kind of ionosphere-free linear combination of GLONASS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying 'no' means that you don't want BNC to use GLONASS data.</p>"));
1336  _pppWidgets._lcGalileo->setWhatsThis(tr("<p>Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if Galileo data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want BNC to use Galileo data.</p>"));
1337  _pppWidgets._lcBDS->setWhatsThis(tr("<p>Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if BDS data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want to use BDS data.</p>"));
1338  _pppWidgets._sigmaC1->setWhatsThis(tr("<p>Enter a Sigma for GNSS C1 code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of C1 code observations to a PPP solution from combined code and phase data. 2.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma C1 = 2.0'</p>"));
1339  _pppWidgets._sigmaL1->setWhatsThis(tr("<p>Enter a Sigma for GNSS L1 phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma L1 = 0.01'</p>"));
1340  _pppWidgets._maxResC1->setWhatsThis(tr("<p>Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex C1 = 3.0'</p>"));
1341  _pppWidgets._maxResL1->setWhatsThis(tr("<p>Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex L1 = 0.03'</p>"));
1342  _pppWidgets._eleWgtCode->setWhatsThis(tr("<p>Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution.</p>"));
1343  _pppWidgets._eleWgtPhase->setWhatsThis(tr("<p>Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution.</p>"));
1344  _pppWidgets._minObs->setWhatsThis(tr("<p>Select a Minimum Number of Observations per epoch for a PPP solution.</p><p>BNC will only process epochs with observation numbers reaching or exceeding this minimum.</p>"));
1345  _pppWidgets._minEle->setWhatsThis(tr("<p>Select a Minimum satellite Elevation for observations.</p><p>BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.</p><p>Selecting '10 deg' may be an appropriate choice in order to avoid too noisy observations.</p>"));
1346
1347  // WhatsThis, Combine Corrections
1348  // ------------------------------
1349  _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock correction streams in real-time to produce, encode, upload and save a combination of correctors coming from different providers. To add a line to the 'Combine Corrections' table hit the 'Add Row' button, double click on the 'Mountpoint' field to specify a Broadcast Ephemeris Correction mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter a weight to be applied for this stream in the combination.</p><p>Note that the orbit information in the resulting combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides orbit and clock correction streams BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris Correction stream in the 'Combine Corrections' table. Instead of combining corrections BNC will then add the corrections to the Broadcast Ephemeris with the possibility to save final orbit and clock results in SP3 and/or Clock RINEX format.</p>"));
1350  addCmbRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Combine Corrections' table.</p>"));
1351  delCmbRowButton->setWhatsThis(tr("<p>Hit 'Delete' button to delete the highlighted line(s) from the 'Combine Corrections' table.</p>"));
1352  _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'.</p><p>It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1353  _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1354  _cmbSamplSpinBox->setWhatsThis(tr("<p>Select a combination Sampling interval for the clocks. Clock corrections will be produced following that interval.</p><p>A value of 10 sec may be an appropriate choice.</p>"));
1355  _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination.</p>"));
1356
1357  // WhatsThis, Upload Corrections
1358  // -----------------------------
1359  _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS14) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table.</p>"));
1360  addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>"));
1361  delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the Upload Corrections' table.</p>"));
1362  _uploadIntrComboBox->setWhatsThis(tr("<p>Select the length of the SP3 and Clock RINEX files.</p>"));
1363  _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("<p>Select a stream's orbit correction sampling interval in seconds.</p><p>A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages.</p>"));
1364  _uploadSamplSp3SpinBox->setWhatsThis(tr("<p>Select a SP3 orbit file sampling interval in minutes.</p><p>A value of zero '0' tells BNC to store all available samples into SP3 orbit files.</p>"));
1365  _uploadSamplClkRnxSpinBox->setWhatsThis(tr("<p>Select a Clock RINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Clock RINEX files.</p>"));
1366  setUploadTrafoButton->setWhatsThis(tr("<p>Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation via option 'System'.</p>"));
1367  _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify an 'ANTEX file' path if you want to save the stream content in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file content as well as the orbit and clock correctors will be referred to satellite APCs.</p>"));
1368
1369  // WhatsThis, Upload Ephemeris
1370  // ---------------------------
1371  _uploadEphHostLineEdit->setWhatsThis(tr("<p>BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the IP number or URL of an Ntrip Broadcaster to upload the stream.</p><p>An empty option field means that you don't want to upload Broadcast Ephemeris.</p>"));
1372  _uploadEphPortLineEdit->setWhatsThis(tr("<p>Specify the IP port of the Ntrip Broadcaster to upload the Broadcast Ephemeris stream. Default is port 80.</p>"));
1373  _uploadEphMountpointLineEdit->setWhatsThis(tr("<p>Specify a mountpoint for uploading the Broadcast Ephemeris stream.</p>"));
1374  _uploadEphPasswordLineEdit->setWhatsThis(tr("<p>Specify the stream upload password protecting the mounpoint on the Ntrip Broadcaster.</p>"));
1375  _uploadEphSampleSpinBox->setWhatsThis(tr("<p>Select the Broadcast Ephemeris sampling interval in seconds.</p><p>Default is '5', meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds.</p>"));
1376  _uploadEphBytesCounter->setWhatsThis(tr("<p>BNC shows the amount of data uploaded via this stream.</p>"));
1377// weber
1378
1379  // WhatsThis, Streams Canvas
1380  // -------------------------
1381  _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1382  _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1383  _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1384  _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1385  _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1386  _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1387
1388  // WhatsThis, Log Canvas
1389  // ---------------------
1390  _log->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.</p>"));
1391  _bncFigure->setWhatsThis(tr("<p>The bandwidth consumption per stream is shown in the 'Throughput' tab in bits per second (bps) or kilobits per second (kbps).</p>"));
1392  _bncFigureLate->setWhatsThis(tr("<p>The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.</p><p>Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.</p>"));
1393  _bncFigurePPP->setWhatsThis(tr("<p>PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.</p><p>Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.</p>"));
1394
1395
1396  // Enable/Disable all Widgets
1397  // --------------------------
1398  slotBncTextChanged();
1399  enableStartStop();
1400
1401  // Auto start
1402  // ----------
1403  if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1404    slotStart();
1405  }
1406}
1407
1408// Destructor
1409////////////////////////////////////////////////////////////////////////////
1410bncWindow::~bncWindow() {
1411  if (_caster) {
1412    delete _caster; BNC_CORE->setCaster(0);
1413  }
1414  if (_casterEph) {
1415    delete _casterEph;
1416  }
1417  delete _bncFigureLate;
1418  delete _bncFigurePPP;
1419  delete _actHelp;
1420  delete _actAbout;
1421  delete _actFlowchart;
1422  delete _actFontSel;
1423  delete _actSaveOpt;
1424  delete _actQuit;
1425  delete _actAddMountPoints;
1426  delete _actDeleteMountPoints;
1427  delete _actMapMountPoints;
1428  delete _actStart;
1429  delete _actStop;
1430  delete _actwhatsthis;
1431  delete _proxyHostLineEdit;
1432  delete _proxyPortLineEdit;
1433  delete _sslCaCertPathLineEdit;
1434  delete _sslIgnoreErrorsCheckBox;
1435  delete _logFileLineEdit;
1436  delete _rawOutFileLineEdit;
1437  delete _rnxAppendCheckBox;
1438  delete _onTheFlyComboBox;
1439  delete _autoStartCheckBox;
1440  delete _rnxPathLineEdit;
1441  delete _rnxIntrComboBox;
1442  delete _rnxSamplComboBox;
1443  delete _rnxFileCheckBox;
1444  delete _rnxSkelLineEdit;
1445  delete _rnxScrpLineEdit;
1446  delete _rnxV3CheckBox;
1447  delete _rnxV2Priority;
1448  delete _ephPathLineEdit;
1449  delete _ephIntrComboBox;
1450  delete _ephOutPortLineEdit;
1451  delete _ephV3CheckBox;
1452  delete _corrPathLineEdit;
1453  delete _corrIntrComboBox;
1454  delete _corrPortLineEdit;
1455  delete _outPortLineEdit;
1456  delete _outWaitSpinBox;
1457  delete _outSamplComboBox;
1458  delete _outFileLineEdit;
1459  delete _outUPortLineEdit;
1460  delete _serialMountPointLineEdit;
1461  delete _serialPortNameLineEdit;
1462  delete _serialBaudRateComboBox;
1463  delete _serialFlowControlComboBox;
1464  delete _serialDataBitsComboBox;
1465  delete _serialParityComboBox;
1466  delete _serialStopBitsComboBox;
1467  delete _serialAutoNMEAComboBox;
1468  delete _serialFileNMEALineEdit;
1469  delete _serialHeightNMEALineEdit;
1470  delete _serialManualNMEASamplingSpinBox;
1471  delete _adviseObsRateComboBox;
1472  delete _adviseFailSpinBox;
1473  delete _adviseRecoSpinBox;
1474  delete _adviseScriptLineEdit;
1475  delete _miscMountLineEdit;
1476  delete _miscPortLineEdit;
1477  delete _miscIntrComboBox;
1478  delete _miscScanRTCMCheckBox;
1479  _mountPointsTable->deleteLater();
1480  delete _log;
1481  _cmbTable->deleteLater();
1482  delete _cmbMaxresLineEdit;
1483  delete _cmbUseGlonass;
1484  delete _cmbSamplSpinBox;
1485  delete _cmbMethodComboBox;
1486  _uploadTable->deleteLater();
1487  delete _uploadIntrComboBox;
1488  delete _uploadAntexFile;
1489  delete _uploadSamplRtcmEphCorrSpinBox;
1490  delete _uploadSamplSp3SpinBox;
1491  delete _uploadSamplClkRnxSpinBox;
1492  delete _uploadEphHostLineEdit;
1493  delete _uploadEphPortLineEdit;
1494  delete _uploadEphPasswordLineEdit;
1495  delete _uploadEphMountpointLineEdit;
1496  delete _uploadEphSampleSpinBox;
1497  delete _uploadEphBytesCounter;
1498  delete _loggroup;
1499  delete _reqcActionComboBox;
1500  delete _reqcObsFileChooser;
1501  delete _reqcNavFileChooser;
1502  delete _reqcOutObsLineEdit;
1503  delete _reqcOutNavLineEdit;
1504  delete _reqcOutLogLineEdit;
1505  delete _reqcPlotDirLineEdit;
1506  delete _reqcSkyPlotSignals;
1507  delete _reqcLogSummaryOnly;
1508  delete _reqcEditOptionButton;
1509  delete _sp3CompFileChooser;
1510  delete _sp3CompExclude;
1511  delete _sp3CompLogLineEdit;
1512  //delete _canvas;
1513}
1514
1515//
1516////////////////////////////////////////////////////////////////////////////
1517void bncWindow::populateMountPointsTable() {
1518
1519  for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1520    _mountPointsTable->removeRow(iRow);
1521  }
1522
1523  bncSettings settings;
1524
1525  QListIterator<QString> it(settings.value("mountPoints").toStringList());
1526  int iRow = 0;
1527  while (it.hasNext()) {
1528    QStringList hlp = it.next().split(" ");
1529    if (hlp.size() < 7) continue;
1530    _mountPointsTable->insertRow(iRow);
1531
1532    QUrl    url(hlp[0]);
1533
1534    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1535    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1536    QString nmea(hlp[5]);
1537    if (hlp[6] == "S") {
1538      fullPath = hlp[0].replace(0,2,"");
1539    }
1540    QString ntripVersion = "2";
1541    if (hlp.size() >= 7) {
1542      ntripVersion = (hlp[6]);
1543    }
1544
1545    QTableWidgetItem* it;
1546    it = new QTableWidgetItem(url.userInfo());
1547    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1548    _mountPointsTable->setItem(iRow, 0, it);
1549
1550    it = new QTableWidgetItem(fullPath);
1551    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1552    _mountPointsTable->setItem(iRow, 1, it);
1553
1554    it = new QTableWidgetItem(format);
1555    _mountPointsTable->setItem(iRow, 2, it);
1556
1557    it = new QTableWidgetItem(country);
1558    _mountPointsTable->setItem(iRow, 3, it);
1559
1560    if      (nmea == "yes") {
1561      it = new QTableWidgetItem(latitude);
1562      _mountPointsTable->setItem(iRow, 4, it);
1563      it = new QTableWidgetItem(longitude);
1564      _mountPointsTable->setItem(iRow, 5, it);
1565    } else {
1566      it = new QTableWidgetItem(latitude);
1567      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1568      _mountPointsTable->setItem(iRow, 4, it);
1569
1570      it = new QTableWidgetItem(longitude);
1571      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1572      _mountPointsTable->setItem(iRow, 5, it);
1573    }
1574
1575    it = new QTableWidgetItem(nmea);
1576    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1577    _mountPointsTable->setItem(iRow, 6, it);
1578
1579    it = new QTableWidgetItem(ntripVersion);
1580    ////    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1581    _mountPointsTable->setItem(iRow, 7, it);
1582
1583    bncTableItem* bncIt = new bncTableItem();
1584    bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1585    _mountPointsTable->setItem(iRow, 8, bncIt);
1586
1587    iRow++;
1588  }
1589
1590  _mountPointsTable->sortItems(1);
1591
1592  enableStartStop();
1593}
1594
1595// Retrieve Table
1596////////////////////////////////////////////////////////////////////////////
1597void bncWindow::slotAddMountPoints() {
1598
1599  bncSettings settings;
1600  QString proxyHost = settings.value("proxyHost").toString();
1601  int     proxyPort = settings.value("proxyPort").toInt();
1602  if (proxyHost != _proxyHostLineEdit->text()         ||
1603      proxyPort != _proxyPortLineEdit->text().toInt()) {
1604    int iRet = QMessageBox::question(this, "Question", "Proxy options "
1605                                     "changed. Use the new ones?",
1606                                     QMessageBox::Yes, QMessageBox::No,
1607                                     QMessageBox::NoButton);
1608    if      (iRet == QMessageBox::Yes) {
1609      settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1610      settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1611    }
1612  }
1613
1614  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1615  settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1616
1617  QMessageBox msgBox;
1618  msgBox.setIcon(QMessageBox::Question);
1619  msgBox.setWindowTitle("Add Stream");
1620  msgBox.setText("Add stream(s) coming from:");
1621
1622  QPushButton* buttonNtrip  = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1623  QPushButton* buttonIP     = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1624  QPushButton* buttonUDP    = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1625  QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1626  QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1627
1628  msgBox.exec();
1629
1630  if (msgBox.clickedButton() == buttonNtrip) {
1631    bncTableDlg* dlg = new bncTableDlg(this);
1632    dlg->move(this->pos().x()+50, this->pos().y()+50);
1633    connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1634          this, SLOT(slotNewMountPoints(QStringList*)));
1635    dlg->exec();
1636    delete dlg;
1637  } else if (msgBox.clickedButton() == buttonIP) {
1638    bncIpPort* ipp = new bncIpPort(this);
1639    connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1640          this, SLOT(slotNewMountPoints(QStringList*)));
1641    ipp->exec();
1642    delete ipp;
1643  } else if (msgBox.clickedButton() == buttonUDP) {
1644    bncUdpPort* udp = new bncUdpPort(this);
1645    connect(udp, SIGNAL(newMountPoints(QStringList*)),
1646          this, SLOT(slotNewMountPoints(QStringList*)));
1647    udp->exec();
1648    delete udp;
1649  } else if (msgBox.clickedButton() == buttonSerial) {
1650    bncSerialPort* sep = new bncSerialPort(this);
1651    connect(sep, SIGNAL(newMountPoints(QStringList*)),
1652          this, SLOT(slotNewMountPoints(QStringList*)));
1653    sep->exec();
1654    delete sep;
1655  } else if (msgBox.clickedButton() == buttonCancel) {
1656    // Cancel
1657  }
1658
1659  enableStartStop();
1660}
1661
1662// Delete Selected Mount Points
1663////////////////////////////////////////////////////////////////////////////
1664void bncWindow::slotDeleteMountPoints() {
1665
1666  int nRows = _mountPointsTable->rowCount();
1667  bool flg[nRows];
1668  for (int iRow = 0; iRow < nRows; iRow++) {
1669    if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1670      flg[iRow] = true;
1671    }
1672    else {
1673      flg[iRow] = false;
1674    }
1675  }
1676  for (int iRow = nRows-1; iRow >= 0; iRow--) {
1677    if (flg[iRow]) {
1678      _mountPointsTable->removeRow(iRow);
1679    }
1680  }
1681  _actDeleteMountPoints->setEnabled(false);
1682
1683  enableStartStop();
1684}
1685
1686// New Mount Points Selected
1687////////////////////////////////////////////////////////////////////////////
1688void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1689  int iRow = 0;
1690  QListIterator<QString> it(*mountPoints);
1691  while (it.hasNext()) {
1692    QStringList hlp = it.next().split(" ");
1693    QUrl    url(hlp[0]);
1694    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1695    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1696    QString nmea(hlp[5]);
1697    if (hlp[6] == "S") {
1698      fullPath = hlp[0].replace(0,2,"");
1699    }
1700    QString ntripVersion = "2";
1701    if (hlp.size() >= 7) {
1702      ntripVersion = (hlp[6]);
1703    }
1704
1705    _mountPointsTable->insertRow(iRow);
1706
1707    QTableWidgetItem* it;
1708    it = new QTableWidgetItem(url.userInfo());
1709    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1710    _mountPointsTable->setItem(iRow, 0, it);
1711
1712    it = new QTableWidgetItem(fullPath);
1713    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1714    _mountPointsTable->setItem(iRow, 1, it);
1715
1716    it = new QTableWidgetItem(format);
1717    _mountPointsTable->setItem(iRow, 2, it);
1718
1719    it = new QTableWidgetItem(country);
1720    _mountPointsTable->setItem(iRow, 3, it);
1721
1722    if      (nmea == "yes") {
1723    it = new QTableWidgetItem(latitude);
1724    _mountPointsTable->setItem(iRow, 4, it);
1725    it = new QTableWidgetItem(longitude);
1726    _mountPointsTable->setItem(iRow, 5, it);
1727    } else {
1728    it = new QTableWidgetItem(latitude);
1729    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1730    _mountPointsTable->setItem(iRow, 4, it);
1731    it = new QTableWidgetItem(longitude);
1732    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1733    _mountPointsTable->setItem(iRow, 5, it);
1734    }
1735
1736    it = new QTableWidgetItem(nmea);
1737    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1738    _mountPointsTable->setItem(iRow, 6, it);
1739
1740    it = new QTableWidgetItem(ntripVersion);
1741    ////it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1742    _mountPointsTable->setItem(iRow, 7, it);
1743
1744    bncTableItem* bncIt = new bncTableItem();
1745    _mountPointsTable->setItem(iRow, 8, bncIt);
1746
1747    iRow++;
1748  }
1749  _mountPointsTable->hideColumn(0);
1750  _mountPointsTable->hideColumn(3);
1751  _mountPointsTable->sortItems(1);
1752  delete mountPoints;
1753
1754  enableStartStop();
1755}
1756
1757// Save Options (serialize)
1758////////////////////////////////////////////////////////////////////////////
1759void bncWindow::slotSaveOptions() {
1760  saveOptions();
1761  bncSettings settings;
1762  settings.sync();
1763}
1764
1765// Save Options (memory only)
1766////////////////////////////////////////////////////////////////////////////
1767void bncWindow::saveOptions() {
1768
1769  QStringList mountPoints;
1770  for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1771
1772    if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1773      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1774                "@"  + _mountPointsTable->item(iRow, 1)->text() );
1775
1776      mountPoints.append(url.toString() + " " +
1777                         _mountPointsTable->item(iRow, 2)->text()
1778                 + " " + _mountPointsTable->item(iRow, 3)->text()
1779                 + " " + _mountPointsTable->item(iRow, 4)->text()
1780                 + " " + _mountPointsTable->item(iRow, 5)->text()
1781                 + " " + _mountPointsTable->item(iRow, 6)->text()
1782                 + " " + _mountPointsTable->item(iRow, 7)->text());
1783    } else {
1784      mountPoints.append(
1785                  "//" + _mountPointsTable->item(iRow, 1)->text()
1786                 + " " + _mountPointsTable->item(iRow, 2)->text()
1787                 + " " + _mountPointsTable->item(iRow, 3)->text()
1788                 + " " + _mountPointsTable->item(iRow, 4)->text()
1789                 + " " + _mountPointsTable->item(iRow, 5)->text()
1790                 + " " + _mountPointsTable->item(iRow, 6)->text()
1791                 + " " + _mountPointsTable->item(iRow, 7)->text());
1792    }
1793  }
1794
1795  QStringList cmbStreams;
1796  for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1797    QString hlp;
1798    for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1799      if (_cmbTable->item(iRow, iCol)) {
1800        hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1801      }
1802    }
1803    if (!hlp.isEmpty()) {
1804      cmbStreams << hlp;
1805    }
1806  }
1807
1808  QStringList uploadMountpointsOut;
1809  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1810    QString hlp;
1811    for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1812      if (_uploadTable->cellWidget(iRow, iCol) &&
1813          (iCol == 3 || iCol == 4 || iCol == 5)) {
1814        if      (iCol == 3) {
1815          QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1816          hlp += passwd->text() + ",";
1817        }
1818        else if (iCol == 4) {
1819          QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1820          hlp += system->currentText() + ",";
1821        }
1822        else if (iCol == 5) {
1823          QCheckBox* com    = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1824          QString state; state.setNum(com->checkState());
1825          hlp +=  state + ",";
1826        }
1827      }
1828      else if (_uploadTable->item(iRow, iCol)) {
1829        hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1830      }
1831    }
1832    if (!hlp.isEmpty()) {
1833      uploadMountpointsOut << hlp;
1834    }
1835  }
1836
1837  bncSettings settings;
1838
1839  settings.setValue("startTab",    _aogroup->currentIndex());
1840  settings.setValue("statusTab",   _loggroup->currentIndex());
1841  settings.setValue("mountPoints", mountPoints);
1842// Network
1843  settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1844  settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1845  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1846  settings.setValue("sslIgnoreErrors",  _sslIgnoreErrorsCheckBox->checkState());
1847// General
1848  settings.setValue("logFile",     _logFileLineEdit->text());
1849  settings.setValue("rnxAppend",   _rnxAppendCheckBox->checkState());
1850  settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1851  settings.setValue("autoStart",   _autoStartCheckBox->checkState());
1852  settings.setValue("rawOutFile",  _rawOutFileLineEdit->text());
1853// RINEX Observations
1854  settings.setValue("rnxPath",     _rnxPathLineEdit->text());
1855  settings.setValue("rnxIntr",     _rnxIntrComboBox->currentText());
1856  settings.setValue("rnxSampl",     _rnxSamplComboBox->currentText());
1857  settings.setValue("rnxSkel",     _rnxSkelLineEdit->text());
1858  settings.setValue("rnxOnlyWithSKL",_rnxFileCheckBox->checkState());
1859  settings.setValue("rnxScript",   _rnxScrpLineEdit->text());
1860  settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1861   settings.setValue("rnxV3",        _rnxV3CheckBox->checkState());
1862// RINEX Ephemeris
1863  settings.setValue("ephPath",       _ephPathLineEdit->text());
1864  settings.setValue("ephIntr",       _ephIntrComboBox->currentText());
1865  settings.setValue("ephOutPort",    _ephOutPortLineEdit->text());
1866  settings.setValue("ephV3",         _ephV3CheckBox->checkState());
1867// Broadcast Corrections
1868  settings.setValue("corrPath",    _corrPathLineEdit->text());
1869  settings.setValue("corrIntr",    _corrIntrComboBox->currentText());
1870  settings.setValue("corrPort",    _corrPortLineEdit->text());
1871// Feed Engine
1872  settings.setValue("outPort",     _outPortLineEdit->text());
1873  settings.setValue("outWait",     _outWaitSpinBox->value());
1874  settings.setValue("outSampl",    _outSamplComboBox->currentText());
1875  settings.setValue("outFile",     _outFileLineEdit->text());
1876  settings.setValue("outUPort",    _outUPortLineEdit->text());
1877// Serial Output
1878  settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1879  settings.setValue("serialPortName",  _serialPortNameLineEdit->text());
1880  settings.setValue("serialBaudRate",  _serialBaudRateComboBox->currentText());
1881  settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1882  settings.setValue("serialDataBits",  _serialDataBitsComboBox->currentText());
1883  settings.setValue("serialParity",    _serialParityComboBox->currentText());
1884  settings.setValue("serialStopBits",  _serialStopBitsComboBox->currentText());
1885  settings.setValue("serialAutoNMEA",  _serialAutoNMEAComboBox->currentText());
1886  settings.setValue("serialFileNMEA",    _serialFileNMEALineEdit->text());
1887  settings.setValue("serialHeightNMEA",  _serialHeightNMEALineEdit->text());
1888  settings.setValue("serialManualNMEASampling", _serialManualNMEASamplingSpinBox->value());
1889// Outages
1890  settings.setValue("adviseObsRate", _adviseObsRateComboBox->currentText());
1891  settings.setValue("adviseFail",    _adviseFailSpinBox->value());
1892  settings.setValue("adviseReco",    _adviseRecoSpinBox->value());
1893  settings.setValue("adviseScript",  _adviseScriptLineEdit->text());
1894// Miscellaneous
1895  settings.setValue("miscMount",   _miscMountLineEdit->text());
1896  settings.setValue("miscPort",    _miscPortLineEdit->text());
1897  settings.setValue("miscIntr",    _miscIntrComboBox->currentText());
1898  settings.setValue("miscScanRTCM", _miscScanRTCMCheckBox->checkState());
1899// Reqc
1900  settings.setValue("reqcAction",     _reqcActionComboBox->currentText());
1901  settings.setValue("reqcObsFile",    _reqcObsFileChooser->fileName());
1902  settings.setValue("reqcNavFile",    _reqcNavFileChooser->fileName());
1903  settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1904  settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1905  settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1906  settings.setValue("reqcPlotDir",    _reqcPlotDirLineEdit->text());
1907  settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1908  settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
1909// SP3 Comparison
1910  settings.setValue("sp3CompFile",       _sp3CompFileChooser->fileName());
1911  settings.setValue("sp3CompExclude",    _sp3CompExclude->text());
1912  settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
1913// Combine Corrections
1914  if (!cmbStreams.isEmpty()) {
1915    settings.setValue("cmbStreams", cmbStreams);
1916  }
1917  else {
1918    settings.setValue("cmbStreams", "");
1919  }
1920  settings.setValue("cmbMethod",     _cmbMethodComboBox->currentText());
1921  settings.setValue("cmbMaxres",     _cmbMaxresLineEdit->text());
1922  settings.setValue("cmbSampl",      _cmbSamplSpinBox->value());
1923  settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
1924// Upload Corrections
1925  if (!uploadMountpointsOut.isEmpty()) {
1926    settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1927  }
1928  else {
1929    settings.setValue("uploadMountpointsOut", "");
1930  }
1931  settings.setValue("uploadIntr",             _uploadIntrComboBox->currentText());
1932  settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1933  settings.setValue("uploadSamplSp3",         _uploadSamplSp3SpinBox->value());
1934  settings.setValue("uploadSamplClkRnx",      _uploadSamplClkRnxSpinBox->value());
1935  settings.setValue("uploadAntexFile",        _uploadAntexFile->fileName());
1936// Upload Ephemeris
1937  settings.setValue("uploadEphHost",      _uploadEphHostLineEdit->text());
1938  settings.setValue("uploadEphPort",      _uploadEphPortLineEdit->text());
1939  settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1940  settings.setValue("uploadEphPassword",  _uploadEphPasswordLineEdit->text());
1941  settings.setValue("uploadEphSample",    _uploadEphSampleSpinBox->value());
1942
1943  if (_caster) {
1944    _caster->readMountPoints();
1945  }
1946
1947  _pppWidgets.saveOptions();
1948}
1949
1950// All get slots terminated
1951////////////////////////////////////////////////////////////////////////////
1952void bncWindow::slotGetThreadsFinished() {
1953  BNC_CORE->slotMessage("All Get Threads Terminated", true);
1954  delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
1955  delete _casterEph; _casterEph = 0;
1956  _runningRealTime = false;
1957}
1958
1959// Start It!
1960////////////////////////////////////////////////////////////////////////////
1961void bncWindow::slotStart() {
1962  saveOptions();
1963  if      ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
1964    _runningPPP = true;
1965    enableStartStop();
1966    _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
1967    BNC_CORE->startPPP();
1968    _bncFigurePPP->reset();
1969  }
1970  else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
1971    if (_reqcActionComboBox->currentText() == "Analyze") {
1972      _runningQC = true;
1973      t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
1974      connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1975      reqcAnalyze->start();
1976    }
1977    else {
1978      _runningEdit = true;
1979      t_reqcEdit* reqcEdit = new t_reqcEdit(this);
1980      connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1981      reqcEdit->start();
1982    }
1983    enableStartStop();
1984  }
1985  else if (!_sp3CompFileChooser->fileName().isEmpty()) {
1986    _runningSp3Comp = true;
1987    t_sp3Comp* sp3Comp = new t_sp3Comp(this);
1988    connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1989    sp3Comp->start();
1990    enableStartStop();
1991  }
1992  else {
1993    startRealTime();
1994    BNC_CORE->startPPP();
1995  }
1996}
1997
1998// Start Real-Time (Retrieve Data etc.)
1999////////////////////////////////////////////////////////////////////////////
2000void bncWindow::startRealTime() {
2001
2002  _runningRealTime = true;
2003
2004  _bncFigurePPP->reset();
2005
2006  _actDeleteMountPoints->setEnabled(false);
2007
2008  enableStartStop();
2009
2010  _caster = new bncCaster();
2011
2012  BNC_CORE->setCaster(_caster);
2013  BNC_CORE->setPortEph(_ephOutPortLineEdit->text().toInt());
2014  BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2015  BNC_CORE->initCombination();
2016
2017  connect(_caster, SIGNAL(getThreadsFinished()),
2018          this, SLOT(slotGetThreadsFinished()));
2019
2020  connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2021           this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2022
2023  BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION" ("BNC_OS") ==========", true);
2024
2025  bncSettings settings;
2026
2027  // Active panels
2028  // -------------
2029  if (!_rnxPathLineEdit->text().isEmpty())
2030      BNC_CORE->slotMessage("Panel 'RINEX Observations' active", true);
2031  if (!_ephPathLineEdit->text().isEmpty())
2032      BNC_CORE->slotMessage("Panel 'RINEX Ephemeris' active", true);
2033  if (!_corrPathLineEdit->text().isEmpty())
2034      BNC_CORE->slotMessage("Panel 'Broadcast Corrections' active", true);
2035  if (!_outPortLineEdit->text().isEmpty())
2036      BNC_CORE->slotMessage("Panel 'Feed Engine' active", true);
2037  if (!_serialMountPointLineEdit->text().isEmpty())
2038      BNC_CORE->slotMessage("Panel 'Serial Output' active", true);
2039  if (!_adviseObsRateComboBox->currentText().isEmpty())
2040      BNC_CORE->slotMessage("Panel 'Outages' active", true);
2041  if (!_miscMountLineEdit->text().isEmpty())
2042      BNC_CORE->slotMessage("Panel 'Miscellaneous' active", true);
2043  if (_pppWidgets._dataSource->currentText() == "Real-Time Streams")
2044      BNC_CORE->slotMessage("Panel 'PPP' active", true);
2045  if (_cmbTable->rowCount() > 0)
2046      BNC_CORE->slotMessage("Panel 'Combine Corrections' active", true);
2047  if (_uploadTable->rowCount() > 0)
2048      BNC_CORE->slotMessage("Panel 'Upload Corrections' active", true);
2049  if (!_uploadEphHostLineEdit->text().isEmpty())
2050      BNC_CORE->slotMessage("Panel 'UploadEphemeris' active", true);
2051
2052  QDir rnxdir(settings.value("rnxPath").toString());
2053  if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2054
2055  QString rnx_file = settings.value("rnxScript").toString();
2056  if ( !rnx_file.isEmpty() ) {
2057    QFile rnxfile(settings.value("rnxScript").toString());
2058    if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2059  }
2060
2061  QDir ephdir(settings.value("ephPath").toString());
2062  if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2063
2064  QDir corrdir(settings.value("corrPath").toString());
2065  if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2066
2067  QString advise_file = settings.value("adviseScript").toString();
2068  if ( !advise_file.isEmpty() ) {
2069    QFile advisefile(settings.value("adviseScript").toString());
2070    if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2071  }
2072
2073  _caster->readMountPoints();
2074
2075  _casterEph = new bncEphUploadCaster();
2076  connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2077          _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2078}
2079
2080// Retrieve Data
2081////////////////////////////////////////////////////////////////////////////
2082void bncWindow::slotStop() {
2083  int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
2084                                   QMessageBox::Yes, QMessageBox::No,
2085                                   QMessageBox::NoButton);
2086  if (iRet == QMessageBox::Yes) {
2087    BNC_CORE->stopPPP();
2088    BNC_CORE->stopCombination();
2089    delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
2090    delete _casterEph; _casterEph = 0;
2091    _runningRealTime = false;
2092    _runningPPP      = false;
2093    enableStartStop();
2094  }
2095}
2096
2097// Close Application gracefully
2098////////////////////////////////////////////////////////////////////////////
2099void bncWindow::closeEvent(QCloseEvent* event) {
2100
2101  int iRet = QMessageBox::question(this, "Close", "Save Options?",
2102                                   QMessageBox::Yes, QMessageBox::No,
2103                                   QMessageBox::Cancel);
2104
2105  if      (iRet == QMessageBox::Cancel) {
2106    event->ignore();
2107    return;
2108  }
2109  else if (iRet == QMessageBox::Yes) {
2110    slotSaveOptions();
2111  }
2112
2113  BNC_CORE->stopPPP();
2114
2115  QMainWindow::closeEvent(event);
2116}
2117
2118// User changed the selection of mountPoints
2119////////////////////////////////////////////////////////////////////////////
2120void bncWindow::slotSelectionChanged() {
2121  if (_mountPointsTable->selectedItems().isEmpty()) {
2122    _actDeleteMountPoints->setEnabled(false);
2123  }
2124  else {
2125    _actDeleteMountPoints->setEnabled(true);
2126  }
2127}
2128
2129// Display Program Messages
2130////////////////////////////////////////////////////////////////////////////
2131void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2132  if (showOnScreen ) {
2133    _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
2134  }
2135}
2136
2137// About Message
2138////////////////////////////////////////////////////////////////////////////
2139void bncWindow::slotAbout() {
2140 new bncAboutDlg(0);
2141}
2142
2143//Flowchart
2144////////////////////////////////////////////////////////////////////////////
2145void bncWindow::slotFlowchart() {
2146 new bncFlowchartDlg(0);
2147}
2148
2149// Help Window
2150////////////////////////////////////////////////////////////////////////////
2151void bncWindow::slotHelp() {
2152  QUrl url;
2153  url.setPath(":bnchelp.html");
2154  new bncHlpDlg(0, url);
2155}
2156
2157// Select Fonts
2158////////////////////////////////////////////////////////////////////////////
2159void bncWindow::slotFontSel() {
2160  bool ok;
2161  QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2162  if (ok) {
2163    bncSettings settings;
2164    settings.setValue("font", newFont.toString());
2165    QApplication::setFont(newFont);
2166    int ww = QFontMetrics(newFont).width('w');
2167    setMinimumSize(60*ww, 80*ww);
2168    resize(60*ww, 80*ww);
2169  }
2170}
2171
2172// Whats This Help
2173void bncWindow::slotWhatsThis() {
2174  QWhatsThis::enterWhatsThisMode();
2175}
2176
2177//
2178////////////////////////////////////////////////////////////////////////////
2179void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2180  _threads = threads;
2181
2182  _bncFigure->updateMountPoints();
2183  _bncFigureLate->updateMountPoints();
2184
2185  populateMountPointsTable();
2186  bncSettings settings;
2187  _outSamplComboBox->findText(settings.value("rnxSampl").toString());
2188  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
2189  QListIterator<bncGetThread*> iTh(threads);
2190  while (iTh.hasNext()) {
2191    bncGetThread* thread = iTh.next();
2192    for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2193      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2194                "@"  + _mountPointsTable->item(iRow, 1)->text() );
2195      if (url                                      == thread->mountPoint() &&
2196          _mountPointsTable->item(iRow, 4)->text() == thread->latitude()   &&
2197          _mountPointsTable->item(iRow, 5)->text() == thread->longitude() ) {
2198        ((bncTableItem*) _mountPointsTable->item(iRow, 8))->setGetThread(thread);
2199        disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2200                  _bncFigure, SLOT(slotNewData(QByteArray, double)));
2201        connect(thread, SIGNAL(newBytes(QByteArray, double)),
2202                _bncFigure, SLOT(slotNewData(QByteArray, double)));
2203        disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2204                   _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2205        connect(thread, SIGNAL(newLatency(QByteArray, double)),
2206                _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2207        break;
2208      }
2209    }
2210  }
2211}
2212
2213//
2214////////////////////////////////////////////////////////////////////////////
2215void bncWindow::CreateMenu() {
2216  // Create Menus
2217  // ------------
2218  _menuFile = menuBar()->addMenu(tr("&File"));
2219  _menuFile->addAction(_actFontSel);
2220  _menuFile->addSeparator();
2221  _menuFile->addAction(_actSaveOpt);
2222  _menuFile->addSeparator();
2223  _menuFile->addAction(_actQuit);
2224
2225  _menuHlp = menuBar()->addMenu(tr("&Help"));
2226  _menuHlp->addAction(_actHelp);
2227  _menuHlp->addAction(_actFlowchart);
2228  _menuHlp->addAction(_actAbout);
2229}
2230
2231// Toolbar
2232////////////////////////////////////////////////////////////////////////////
2233void bncWindow::AddToolbar() {
2234  QToolBar* toolBar = new QToolBar;
2235  addToolBar(Qt::BottomToolBarArea, toolBar);
2236  toolBar->setMovable(false);
2237  toolBar->addAction(_actAddMountPoints);
2238  toolBar->addAction(_actDeleteMountPoints);
2239  toolBar->addAction(_actMapMountPoints);
2240  toolBar->addAction(_actStart);
2241  toolBar->addAction(_actStop);
2242  toolBar->addWidget(new QLabel("                                           "));
2243  toolBar->addAction(_actwhatsthis);
2244}
2245
2246// About
2247////////////////////////////////////////////////////////////////////////////
2248bncAboutDlg::bncAboutDlg(QWidget* parent) :
2249   QDialog(parent) {
2250
2251  QTextBrowser* tb = new QTextBrowser;
2252  QUrl url; url.setPath(":bncabout.html");
2253  tb->setSource(url);
2254  tb->setReadOnly(true);
2255
2256  int ww = QFontMetrics(font()).width('w');
2257  QPushButton* _closeButton = new QPushButton("Close");
2258  _closeButton->setMaximumWidth(10*ww);
2259  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2260
2261  QGridLayout* dlgLayout = new QGridLayout();
2262  QLabel* img = new QLabel();
2263  img->setPixmap(QPixmap(":ntrip-logo.png"));
2264  dlgLayout->addWidget(img, 0,0);
2265  dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2266  dlgLayout->addWidget(tb,1,0,1,2);
2267  dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2268
2269  setLayout(dlgLayout);
2270  resize(60*ww, 60*ww);
2271  setWindowTitle("About BNC");
2272  show();
2273}
2274
2275//
2276////////////////////////////////////////////////////////////////////////////
2277bncAboutDlg::~bncAboutDlg() {
2278
2279};
2280
2281// Flowchart
2282////////////////////////////////////////////////////////////////////////////
2283bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2284   QDialog(parent) {
2285
2286  int ww = QFontMetrics(font()).width('w');
2287  QPushButton* _closeButton = new QPushButton("Close");
2288  _closeButton->setMaximumWidth(10*ww);
2289  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2290
2291  QGridLayout* dlgLayout = new QGridLayout();
2292  QLabel* img = new QLabel();
2293  img->setPixmap(QPixmap(":bncflowchart.png"));
2294  dlgLayout->addWidget(img, 0,0);
2295  dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2296
2297  setLayout(dlgLayout);
2298  setWindowTitle("Flow Chart");
2299  show();
2300}
2301
2302//
2303////////////////////////////////////////////////////////////////////////////
2304bncFlowchartDlg::~bncFlowchartDlg() {
2305};
2306
2307// Enable/Disable Widget (and change its color)
2308////////////////////////////////////////////////////////////////////////////
2309void bncWindow::enableWidget(bool enable, QWidget* widget) {
2310
2311  const static QPalette paletteWhite(QColor(255, 255, 255));
2312  const static QPalette paletteGray(QColor(230, 230, 230));
2313
2314  widget->setEnabled(enable);
2315  if (enable) {
2316    widget->setPalette(paletteWhite);
2317  }
2318  else {
2319    widget->setPalette(paletteGray);
2320  }
2321}
2322
2323//  Bnc Text
2324////////////////////////////////////////////////////////////////////////////
2325void bncWindow::slotBncTextChanged(){
2326
2327  const static QPalette paletteWhite(QColor(255, 255, 255));
2328  const static QPalette paletteGray(QColor(230, 230, 230));
2329
2330  bool enable = true;
2331
2332  // Proxy
2333  //------
2334  if (sender() == 0 || sender() == _proxyHostLineEdit) {
2335    enable = !_proxyHostLineEdit->text().isEmpty();
2336    enableWidget(enable, _proxyPortLineEdit);
2337  }
2338
2339  // RINEX Observations
2340  // ------------------
2341  if (sender() == 0 || sender() == _rnxPathLineEdit) {
2342    enable = !_rnxPathLineEdit->text().isEmpty();
2343    enableWidget(enable, _rnxIntrComboBox);
2344    enableWidget(enable, _rnxSamplComboBox);
2345    enableWidget(enable, _rnxSkelLineEdit);
2346    enableWidget(enable, _rnxFileCheckBox);
2347    enableWidget(enable, _rnxScrpLineEdit);
2348    enableWidget(enable, _rnxV2Priority);
2349    enableWidget(enable, _rnxV3CheckBox);
2350
2351    bool enable1 = true;
2352    enable1 = _rnxV3CheckBox->isChecked();
2353    if (enable && enable1) {
2354    enableWidget(false, _rnxV2Priority);
2355    }
2356    if (enable && !enable1) {
2357    enableWidget(true, _rnxV2Priority);
2358    }
2359  }
2360
2361  // RINEX Observations, Signal Priority
2362  // -----------------------------------
2363  if (sender() == 0 || sender() == _rnxV3CheckBox) {
2364    if (!_rnxPathLineEdit->text().isEmpty()) {
2365      enableWidget(enable, _rnxIntrComboBox);
2366      enable = !_rnxV3CheckBox->isChecked();
2367      enableWidget(enable, _rnxV2Priority);
2368    }
2369  }
2370
2371  // RINEX Ephemeris
2372  // ---------------
2373  if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _ephOutPortLineEdit) {
2374    enable = !_ephPathLineEdit->text().isEmpty() || !_ephOutPortLineEdit->text().isEmpty();
2375    enableWidget(enable, _ephIntrComboBox);
2376    enableWidget(enable, _ephV3CheckBox);
2377  }
2378
2379  // Broadcast Corrections
2380  // ---------------------
2381  if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2382    enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2383    enableWidget(enable, _corrIntrComboBox);
2384  }
2385
2386  // Feed Engine
2387  // -----------
2388  if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2389    enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2390    enableWidget(enable, _outWaitSpinBox);
2391    enableWidget(enable, _outSamplComboBox);
2392  }
2393
2394  // Serial Output
2395  // -------------
2396  if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2397      sender() == _serialAutoNMEAComboBox) {
2398    enable = !_serialMountPointLineEdit->text().isEmpty();
2399    enableWidget(enable, _serialPortNameLineEdit);
2400    enableWidget(enable, _serialBaudRateComboBox);
2401    enableWidget(enable, _serialParityComboBox);
2402    enableWidget(enable, _serialDataBitsComboBox);
2403    enableWidget(enable, _serialStopBitsComboBox);
2404    enableWidget(enable, _serialFlowControlComboBox);
2405    enableWidget(enable, _serialAutoNMEAComboBox);
2406    bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2407    enableWidget(enable2, _serialFileNMEALineEdit);
2408    bool enable3 = enable && _serialAutoNMEAComboBox->currentText().contains("Manual");
2409    enableWidget(enable3, _serialHeightNMEALineEdit);
2410    enableWidget(enable3, _serialManualNMEASamplingSpinBox);
2411  }
2412
2413  // Outages
2414  // -------
2415  if (sender() == 0 || sender() == _adviseObsRateComboBox) {
2416    enable = !_adviseObsRateComboBox->currentText().isEmpty();
2417    enableWidget(enable, _adviseFailSpinBox);
2418    enableWidget(enable, _adviseRecoSpinBox);
2419    enableWidget(enable, _adviseScriptLineEdit);
2420  }
2421
2422  // Miscellaneous
2423  // -------------
2424  if (sender() == 0 || sender() == _miscMountLineEdit) {
2425    enable = !_miscMountLineEdit->text().isEmpty();
2426    enableWidget(enable, _miscIntrComboBox);
2427    enableWidget(enable, _miscScanRTCMCheckBox);
2428    enableWidget(enable, _miscPortLineEdit);
2429  }
2430
2431  // Enable/disable Broadcast Ephemerides
2432  // ------------------------------------
2433  if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2434    enable = !_uploadEphHostLineEdit->text().isEmpty();
2435    enableWidget(enable, _uploadEphPortLineEdit);
2436    enableWidget(enable, _uploadEphMountpointLineEdit);
2437    enableWidget(enable, _uploadEphPasswordLineEdit);
2438    enableWidget(enable, _uploadEphSampleSpinBox);
2439  }
2440
2441  // Combine Corrections
2442  // -------------------
2443  if (sender() == 0 || sender() == _cmbTable) {
2444    int iRow = _cmbTable->rowCount();
2445    if (iRow > 0) {
2446      enableWidget(true, _cmbMethodComboBox);
2447      enableWidget(true, _cmbMaxresLineEdit);
2448      enableWidget(true, _cmbSamplSpinBox);
2449      enableWidget(true, _cmbUseGlonass);
2450    }
2451    else {
2452      enableWidget(false, _cmbMethodComboBox);
2453      enableWidget(false, _cmbMaxresLineEdit);
2454      enableWidget(false, _cmbSamplSpinBox);
2455      enableWidget(false, _cmbUseGlonass);
2456    }
2457  }
2458
2459  // Upload(clk)
2460  // -----------
2461  int iRow = _uploadTable->rowCount();
2462  if (iRow > 0) {
2463    enableWidget(true, _uploadIntrComboBox);
2464    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2465    enableWidget(true, _uploadSamplClkRnxSpinBox);
2466    enableWidget(true, _uploadSamplSp3SpinBox);
2467    enableWidget(true, _uploadAntexFile);
2468  }
2469  else {
2470    enableWidget(false, _uploadIntrComboBox);
2471    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2472    enableWidget(false, _uploadSamplClkRnxSpinBox);
2473    enableWidget(false, _uploadSamplSp3SpinBox);
2474    enableWidget(false, _uploadAntexFile);
2475  }
2476
2477  // QC
2478  // --
2479  if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2480    enable = !_reqcActionComboBox->currentText().isEmpty();
2481    bool enable10   = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2482//  bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2483    enableWidget(enable,                            _reqcObsFileChooser);
2484    enableWidget(enable,                            _reqcNavFileChooser);
2485    enableWidget(enable,                            _reqcOutLogLineEdit);
2486    enableWidget(enable &&  enable10,               _reqcEditOptionButton);
2487    enableWidget(enable &&  enable10,               _reqcOutObsLineEdit);
2488    enableWidget(enable &&  enable10,               _reqcOutNavLineEdit);
2489    enableWidget(enable && !enable10,               _reqcLogSummaryOnly);
2490    enableWidget(enable && !enable10,               _reqcSkyPlotSignals);
2491//  enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2492    enableWidget(enable && !enable10,               _reqcPlotDirLineEdit);
2493  }
2494
2495  // SP3 File Comparison
2496  // -------------------
2497  if (sender() == 0 || sender() == _sp3CompFileChooser) {
2498    enable = !_sp3CompFileChooser->fileName().isEmpty();
2499    enableWidget(enable, _sp3CompLogLineEdit);
2500    enableWidget(enable, _sp3CompExclude);
2501  }
2502
2503  enableStartStop();
2504}
2505
2506//
2507////////////////////////////////////////////////////////////////////////////
2508void bncWindow::slotAddCmbRow() {
2509  int iRow = _cmbTable->rowCount();
2510  _cmbTable->insertRow(iRow);
2511  for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2512    _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2513  }
2514}
2515
2516//
2517////////////////////////////////////////////////////////////////////////////
2518void bncWindow::slotDelCmbRow() {
2519
2520  const static QPalette paletteWhite(QColor(255, 255, 255));
2521  const static QPalette paletteGray(QColor(230, 230, 230));
2522
2523  int nRows = _cmbTable->rowCount();
2524  bool flg[nRows];
2525  for (int iRow = 0; iRow < nRows; iRow++) {
2526    if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2527      flg[iRow] = true;
2528    }
2529    else {
2530      flg[iRow] = false;
2531    }
2532  }
2533  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2534    if (flg[iRow]) {
2535      _cmbTable->removeRow(iRow);
2536    }
2537  }
2538  nRows = _cmbTable->rowCount();
2539  if (nRows < 1) {
2540    enableWidget(false, _cmbMethodComboBox);
2541    enableWidget(false, _cmbMaxresLineEdit);
2542    enableWidget(false, _cmbSamplSpinBox);
2543    enableWidget(false, _cmbUseGlonass);
2544  }
2545}
2546
2547//
2548////////////////////////////////////////////////////////////////////////////
2549void bncWindow::populateCmbTable() {
2550
2551  for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2552    _cmbTable->removeRow(iRow);
2553  }
2554
2555  bncSettings settings;
2556
2557  int iRow = -1;
2558  QListIterator<QString> it(settings.value("cmbStreams").toStringList());
2559  while (it.hasNext()) {
2560    QStringList hlp = it.next().split(" ");
2561    if (hlp.size() > 2) {
2562      ++iRow;
2563      _cmbTable->insertRow(iRow);
2564    }
2565    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2566      _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2567    }
2568  }
2569}
2570
2571//
2572////////////////////////////////////////////////////////////////////////////
2573void bncWindow::slotAddUploadRow() {
2574  int iRow = _uploadTable->rowCount();
2575  _uploadTable->insertRow(iRow);
2576  for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2577    if      (iCol == 3) {
2578      QLineEdit* passwd = new QLineEdit();
2579      passwd->setFrame(false);
2580      passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2581      _uploadTable->setCellWidget(iRow, iCol, passwd);
2582    }
2583    else if (iCol == 4) {
2584      QComboBox* system = new QComboBox();
2585      system->setEditable(false);
2586      system->addItems(QString("IGS14,ETRF2000,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2587      system->setFrame(false);
2588      _uploadTable->setCellWidget(iRow, iCol, system);
2589    }
2590    else if (iCol == 5) {
2591      QCheckBox* com = new QCheckBox();
2592      _uploadTable->setCellWidget(iRow, iCol, com);
2593    }
2594    else if (iCol == 11) {
2595      bncTableItem* bncIt = new bncTableItem();
2596      bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2597      _uploadTable->setItem(iRow, iCol, bncIt);
2598      BNC_CORE->_uploadTableItems[iRow] = bncIt;
2599    }
2600    else {
2601      _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2602    }
2603  }
2604}
2605
2606//
2607////////////////////////////////////////////////////////////////////////////
2608void bncWindow::slotDelUploadRow() {
2609  BNC_CORE->_uploadTableItems.clear();
2610  int nRows = _uploadTable->rowCount();
2611  bool flg[nRows];
2612  for (int iRow = 0; iRow < nRows; iRow++) {
2613    if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2614      flg[iRow] = true;
2615    }
2616    else {
2617      flg[iRow] = false;
2618    }
2619  }
2620  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2621    if (flg[iRow]) {
2622      _uploadTable->removeRow(iRow);
2623    }
2624  }
2625  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2626    BNC_CORE->_uploadTableItems[iRow] =
2627                                (bncTableItem*) _uploadTable->item(iRow, 11);
2628  }
2629  nRows = _uploadTable->rowCount();
2630  if (nRows < 1) {
2631    enableWidget(false, _uploadIntrComboBox);
2632    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2633    enableWidget(false, _uploadSamplSp3SpinBox);
2634    enableWidget(false, _uploadSamplClkRnxSpinBox);
2635    enableWidget(false, _uploadAntexFile);
2636  }
2637}
2638
2639//
2640////////////////////////////////////////////////////////////////////////////
2641void bncWindow::populateUploadTable() {
2642  for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2643    _uploadTable->removeRow(iRow);
2644  }
2645
2646  bncSettings settings;
2647
2648  int iRow = -1;
2649  QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2650  while (it.hasNext()) {
2651    QStringList hlp = it.next().split(",");
2652    if (hlp.size() > 6) {
2653      ++iRow;
2654      _uploadTable->insertRow(iRow);
2655    }
2656    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2657      if      (iCol == 3) {
2658        QLineEdit* passwd = new QLineEdit();
2659        passwd->setFrame(false);
2660        passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2661        passwd->setText(hlp[iCol]);
2662        _uploadTable->setCellWidget(iRow, iCol, passwd);
2663      }
2664      else if (iCol == 4) {
2665        QComboBox* system = new QComboBox();
2666        system->setEditable(false);
2667        system->addItems(QString("IGS14,ETRF2000,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2668        system->setFrame(false);
2669        system->setCurrentIndex(system->findText(hlp[iCol]));
2670        _uploadTable->setCellWidget(iRow, iCol, system);
2671      }
2672      else if (iCol == 5) {
2673        QCheckBox* com = new QCheckBox();
2674        if (hlp[iCol].toInt() == Qt::Checked) {
2675          com->setCheckState(Qt::Checked);
2676        }
2677        _uploadTable->setCellWidget(iRow, iCol, com);
2678      }
2679      else if (iCol == 11) {
2680        bncTableItem* bncIt = new bncTableItem();
2681        bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2682        _uploadTable->setItem(iRow, iCol, bncIt);
2683        BNC_CORE->_uploadTableItems[iRow] = bncIt;
2684      }
2685      else {
2686        _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2687      }
2688    }
2689  }
2690}
2691
2692//
2693////////////////////////////////////////////////////////////////////////////
2694void bncWindow::slotSetUploadTrafo() {
2695  bncCustomTrafo* dlg = new bncCustomTrafo(this);
2696  dlg->exec();
2697  delete dlg;
2698}
2699
2700// Progress Bar Change
2701////////////////////////////////////////////////////////////////////////////
2702void bncWindow::slotPostProcessingProgress(int nEpo) {
2703  _actStart->setText(QString("%1 Epochs").arg(nEpo));
2704}
2705
2706// Post-Processing Reqc Finished
2707////////////////////////////////////////////////////////////////////////////
2708void bncWindow::slotPostProcessingFinished() {
2709  delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2710  _runningPPP     = false;
2711  _runningEdit    = false;
2712  _runningQC      = false;
2713  _runningSp3Comp = false;
2714  _actStart->setText(tr("Sta&rt"));
2715  enableStartStop();
2716}
2717
2718// Edit teqc-like editing options
2719////////////////////////////////////////////////////////////////////////////
2720void bncWindow::slotReqcEditOption() {
2721  saveOptions();
2722  reqcDlg* dlg = new reqcDlg(this);
2723  dlg->move(this->pos().x()+50, this->pos().y()+50);
2724  dlg->exec();
2725  delete dlg;
2726}
2727
2728// Enable/Disable Start and Stop Buttons
2729////////////////////////////////////////////////////////////////////////////
2730void bncWindow::enableStartStop() {
2731  if ( running() ) {
2732    _actStart->setEnabled(false);
2733    if (_runningRealTime || _runningPPP) {
2734      _actStop->setEnabled(true);
2735    }
2736  }
2737  else {
2738    _actStart->setEnabled(true);
2739    _actStop->setEnabled(false);
2740  }
2741}
2742
2743// Show Map
2744////////////////////////////////////////////////////////////////////////////
2745void bncWindow::slotMapMountPoints() {
2746  saveOptions();
2747  t_bncMap* bncMap = new t_bncMap(this);
2748  bncMap->setMinimumSize(800, 600);
2749  bncMap->setWindowTitle("Selected Mountpoints");
2750
2751  bncSettings settings;
2752  QListIterator<QString> it(settings.value("mountPoints").toStringList());
2753  while (it.hasNext()) {
2754    QStringList hlp = it.next().split(" ");
2755    if (hlp.size() < 5) continue;
2756    QUrl   url(hlp[0]);
2757    double latDeg = hlp[3].toDouble();
2758    double lonDeg = hlp[4].toDouble();
2759    bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2760  }
2761
2762  bncMap->show();
2763}
2764
2765// Show Map
2766////////////////////////////////////////////////////////////////////////////
2767void bncWindow::slotMapPPP() {
2768#ifdef QT_WEBKIT
2769  saveOptions();
2770  enableWidget(false, _pppWidgets._mapWinButton);
2771  enableWidget(false, _pppWidgets._useGoogleMap);
2772  enableWidget(false, _pppWidgets._useOpenStreetMap);
2773  enableWidget(false, _pppWidgets._mapWinDotSize);
2774  enableWidget(false, _pppWidgets._mapWinDotColor);
2775
2776  if (!_mapWin) {
2777    _mapWin = new bncMapWin(this);
2778    connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2779    connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2780            _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2781  }
2782  _mapWin->show();
2783#else
2784  QMessageBox::information(this, "Information",
2785                           "Qt Library compiled without QtWebKit");
2786#endif
2787}
2788
2789// Show Map
2790////////////////////////////////////////////////////////////////////////////
2791void bncWindow::slotMapPPPClosed() {
2792#ifdef QT_WEBKIT
2793  enableWidget(true, _pppWidgets._mapWinButton);
2794  enableWidget(true, _pppWidgets._useGoogleMap);
2795  enableWidget(true, _pppWidgets._useOpenStreetMap);
2796  enableWidget(true, _pppWidgets._mapWinDotSize);
2797  enableWidget(true, _pppWidgets._mapWinDotColor);
2798  if (_mapWin) {
2799    QListIterator<bncGetThread*> it(_threads);
2800    while (it.hasNext()) {
2801      bncGetThread* thread = it.next();
2802      thread->disconnect(_mapWin);
2803    }
2804    _mapWin->deleteLater();
2805    _mapWin = 0;
2806  }
2807#endif
2808}
Note: See TracBrowser for help on using the repository browser.