source: ntrip/branches/BNC_2.12/src/bncwindow.cpp @ 8351

Last change on this file since 8351 was 8351, checked in by stuerze, 4 months ago

individual satellite system will be considerred now during concatenation of ephemeris files

File size: 148.3 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class:      bncWindow
30 *
31 * Purpose:    This class implements the main application window.
32 *
33 * Author:     L. Mervart
34 *
35 * Created:    24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#include "rinex/reqcedit.h"
67#include "rinex/reqcanalyze.h"
68#include "orbComp/sp3Comp.h"
69#ifdef QT_WEBKIT
70#  include "map/bncmapwin.h"
71#endif
72
73using namespace std;
74
75#ifdef GNSSCENTER_PLUGIN
76Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
77#endif
78
79// Constructor
80////////////////////////////////////////////////////////////////////////////
81bncWindow::bncWindow() {
82
83  const static QPalette paletteWhite(QColor(255, 255, 255));
84  const static QPalette paletteGray(QColor(230, 230, 230));
85
86#ifdef GNSSCENTER_PLUGIN
87  BNC_CORE->setConfFileName("");
88#endif
89
90  _caster    = 0;
91  _casterEph = 0;
92
93  _bncFigure     = new bncFigure(this);
94  _bncFigureLate = new bncFigureLate(this);
95  _bncFigurePPP  = new bncFigurePPP(this);
96
97  connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
98          _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
99
100  connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
101  connect(BNC_CORE, SIGNAL(finishedRnxPPP()),    this, SLOT(slotPostProcessingFinished()));
102
103  _runningRealTime    = false;
104  _runningPPP         = false;
105  _runningEdit        = false;
106  _runningQC          = false;
107  _runningSp3Comp     = false;
108  _reqcActionComboBox = 0; // necessary for enableStartStop()
109
110  _mapWin = 0;
111
112  int ww = QFontMetrics(this->font()).width('w');
113
114  static const QStringList labels = QString("account, Streams:   resource loader / mountpoint, decoder, country, lat, long, nmea, ntrip, bytes").split(",");
115
116  setMinimumSize(100*ww, 70*ww);
117
118  setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
119
120  connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
121          this, SLOT(slotWindowMessage(QByteArray,bool)));
122
123  // Create Actions
124  // --------------
125  _actHelp = new QAction(tr("&Help Contents"),this);
126  connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
127
128  _actAbout = new QAction(tr("&About BNC"),this);
129  connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
130
131  _actFlowchart = new QAction(tr("&Flow Chart"),this);
132  connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
133
134  _actFontSel = new QAction(tr("Select &Font"),this);
135  connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
136
137  _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
138  connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
139
140  _actQuit  = new QAction(tr("&Quit"),this);
141  connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
142
143  _actAddMountPoints = new QAction(tr("Add &Stream"),this);
144  connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
145
146  _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
147  connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
148  _actDeleteMountPoints->setEnabled(false);
149
150  _actMapMountPoints = new QAction(tr("&Map"),this);
151  connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
152
153  _actStart = new QAction(tr("Sta&rt"),this);
154  connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
155
156  _actStop = new QAction(tr("Sto&p"),this);
157  connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
158
159  _actwhatsthis= new QAction(tr("Help?=Shift+F1"),this);
160  connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
161
162  CreateMenu();
163  AddToolbar();
164
165  bncSettings settings;
166
167  // Network Options
168  // ---------------
169  _proxyHostLineEdit  = new QLineEdit(settings.value("proxyHost").toString());
170  _proxyPortLineEdit  = new QLineEdit(settings.value("proxyPort").toString());
171
172  connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
173          this, SLOT(slotBncTextChanged()));
174
175  _sslCaCertPathLineEdit   = new QLineEdit(settings.value("sslCaCertPath").toString());
176  _sslIgnoreErrorsCheckBox = new QCheckBox();
177  _sslIgnoreErrorsCheckBox->setCheckState(Qt::CheckState(
178                                          settings.value("sslIgnoreErrors").toInt()));
179
180  // General Options
181  // ---------------
182  _logFileLineEdit    = new QLineEdit(settings.value("logFile").toString());
183  _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
184  _rnxAppendCheckBox  = new QCheckBox();
185  _rnxAppendCheckBox->setCheckState(Qt::CheckState(
186                                    settings.value("rnxAppend").toInt()));
187  _onTheFlyComboBox = new QComboBox();
188  _onTheFlyComboBox->setEditable(false);
189  _onTheFlyComboBox->addItems(QString("no, 1 day,1 hour,5 min,1 min").split(","));
190  int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
191  if (ii != -1) {
192    _onTheFlyComboBox->setCurrentIndex(ii);
193  }
194  _autoStartCheckBox  = new QCheckBox();
195  _autoStartCheckBox->setCheckState(Qt::CheckState(
196                                    settings.value("autoStart").toInt()));
197
198  // RINEX Observations Options
199  // --------------------------
200  _rnxPathLineEdit    = new QLineEdit(settings.value("rnxPath").toString());
201  _rnxIntrComboBox    = new QComboBox();
202  _rnxIntrComboBox->setEditable(false);
203  _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
204  ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
205  if (ii != -1) {
206    _rnxIntrComboBox->setCurrentIndex(ii);
207  }
208  _rnxSamplSpinBox    = new QSpinBox();
209  _rnxSamplSpinBox->setMinimum(0);
210  _rnxSamplSpinBox->setMaximum(60);
211  _rnxSamplSpinBox->setSingleStep(5);
212  _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
213  _rnxFileCheckBox = new QCheckBox();
214  _rnxFileCheckBox->setCheckState(Qt::CheckState(settings.value("rnxOnlyWithSKL").toInt()));
215  _rnxSamplSpinBox->setSuffix(" sec");
216  _rnxSkelLineEdit    = new QLineEdit(settings.value("rnxSkel").toString());
217  _rnxSkelLineEdit->setMaximumWidth(5*ww);
218  _rnxScrpLineEdit    = new QLineEdit(settings.value("rnxScript").toString());
219  _rnxV3CheckBox      = new QCheckBox();
220  _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
221  QString hlp = settings.value("rnxV2Priority").toString();
222  if (hlp.isEmpty()) {
223    hlp = "G:12&PWCSLXYN_ G:5&IQX_ R:12&PC_ R:3&IQX_ E:16&BCX_ E:578&IQX_ J:1&SLXCZ_ J:26&SLX_ J:5&IQX_ C:IQX_ I:ABCX_ S:1&C_ S:5&IQX_";
224  }
225  _rnxV2Priority = new QLineEdit(hlp);
226
227  connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
228          this, SLOT(slotBncTextChanged()));
229  connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
230          this, SLOT(slotBncTextChanged()));
231
232  // RINEX Ephemeris Options
233  // -----------------------
234  _ephPathLineEdit    = new QLineEdit(settings.value("ephPath").toString());
235  _ephIntrComboBox    = new QComboBox();
236  _ephIntrComboBox->setEditable(false);
237  _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
238  int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
239  if (jj != -1) {
240    _ephIntrComboBox->setCurrentIndex(jj);
241  }
242  _ephOutPortLineEdit    = new QLineEdit(settings.value("ephOutPort").toString());
243  _ephV3CheckBox = new QCheckBox();
244  _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
245
246  connect(_ephOutPortLineEdit, SIGNAL(textChanged(const QString &)),
247          this, SLOT(slotBncTextChanged()));
248
249  connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
250          this, SLOT(slotBncTextChanged()));
251
252  // Broadcast Corrections Options
253  // -----------------------------
254  _corrPathLineEdit    = new QLineEdit(settings.value("corrPath").toString());
255  _corrIntrComboBox    = new QComboBox();
256  _corrIntrComboBox->setEditable(false);
257  _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
258  int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
259  if (mm != -1) {
260    _corrIntrComboBox->setCurrentIndex(mm);
261  }
262  _corrPortLineEdit    = new QLineEdit(settings.value("corrPort").toString());
263
264  connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
265          this, SLOT(slotBncTextChanged()));
266
267  connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
268          this, SLOT(slotBncTextChanged()));
269
270  // Feed Engine Options
271  // -------------------
272  _outPortLineEdit    = new QLineEdit(settings.value("outPort").toString());
273  _outWaitSpinBox   = new QSpinBox();
274  _outWaitSpinBox->setMinimum(1);
275  _outWaitSpinBox->setMaximum(30);
276  _outWaitSpinBox->setSingleStep(1);
277  _outWaitSpinBox->setSuffix(" sec");
278  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
279  _outSamplSpinBox    = new QSpinBox();
280  _outSamplSpinBox->setMinimum(0);
281  _outSamplSpinBox->setMaximum(60);
282  _outSamplSpinBox->setSingleStep(5);
283  _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
284  _outSamplSpinBox->setSuffix(" sec");
285  _outFileLineEdit    = new QLineEdit(settings.value("outFile").toString());
286  _outUPortLineEdit   = new QLineEdit(settings.value("outUPort").toString());
287
288  connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
289          this, SLOT(slotBncTextChanged()));
290
291  connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
292          this, SLOT(slotBncTextChanged()));
293
294  // Serial Output Options
295  // ---------------------
296  _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
297  _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
298  _serialBaudRateComboBox = new QComboBox();
299  _serialBaudRateComboBox->addItems(QString("110,300,600,"
300            "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
301  int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
302  if (kk != -1) {
303    _serialBaudRateComboBox->setCurrentIndex(kk);
304  }
305  _serialFlowControlComboBox = new QComboBox();
306  _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
307  kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
308  if (kk != -1) {
309    _serialFlowControlComboBox->setCurrentIndex(kk);
310  }
311  _serialDataBitsComboBox = new QComboBox();
312  _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
313  kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
314  if (kk != -1) {
315    _serialDataBitsComboBox->setCurrentIndex(kk);
316  }
317  _serialParityComboBox   = new QComboBox();
318  _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
319  kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
320  if (kk != -1) {
321    _serialParityComboBox->setCurrentIndex(kk);
322  }
323  _serialStopBitsComboBox = new QComboBox();
324  _serialStopBitsComboBox->addItems(QString("1,2").split(","));
325  kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
326  if (kk != -1) {
327    _serialStopBitsComboBox->setCurrentIndex(kk);
328  }
329  _serialAutoNMEAComboBox  = new QComboBox();
330  _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual GPGGA,Manual GNGGA").split(","));
331  kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
332  if (kk != -1) {
333    _serialAutoNMEAComboBox->setCurrentIndex(kk);
334  }
335  _serialFileNMEALineEdit    = new QLineEdit(settings.value("serialFileNMEA").toString());
336  _serialHeightNMEALineEdit  = new QLineEdit(settings.value("serialHeightNMEA").toString());
337
338  _serialManualNMEASamplingSpinBox = new QSpinBox();
339  _serialManualNMEASamplingSpinBox->setMinimum(0);
340  _serialManualNMEASamplingSpinBox->setMaximum(300);
341  _serialManualNMEASamplingSpinBox->setSingleStep(10);
342  _serialManualNMEASamplingSpinBox->setValue(settings.value("serialManualNMEASampling").toInt());
343  _serialManualNMEASamplingSpinBox->setSuffix(" sec");
344
345  connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
346          this, SLOT(slotBncTextChanged()));
347
348  connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
349          this, SLOT(slotBncTextChanged()));
350
351  // Outages Options
352  // ---------------
353  _adviseObsRateComboBox    = new QComboBox();
354  _adviseObsRateComboBox->setEditable(false);
355  _adviseObsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
356  kk = _adviseObsRateComboBox->findText(settings.value("adviseObsRate").toString());
357  if (kk != -1) {
358    _adviseObsRateComboBox->setCurrentIndex(kk);
359  }
360  _adviseFailSpinBox = new QSpinBox();
361  _adviseFailSpinBox->setMinimum(0);
362  _adviseFailSpinBox->setMaximum(60);
363  _adviseFailSpinBox->setSingleStep(1);
364  _adviseFailSpinBox->setSuffix(" min");
365  _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
366  _adviseRecoSpinBox = new QSpinBox();
367  _adviseRecoSpinBox->setMinimum(0);
368  _adviseRecoSpinBox->setMaximum(60);
369  _adviseRecoSpinBox->setSingleStep(1);
370  _adviseRecoSpinBox->setSuffix(" min");
371  _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
372  _adviseScriptLineEdit    = new QLineEdit(settings.value("adviseScript").toString());
373
374  connect(_adviseObsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
375          this, SLOT(slotBncTextChanged()));
376
377  // Miscellaneous Options
378  // ---------------------
379  _miscMountLineEdit  = new QLineEdit(settings.value("miscMount").toString());
380  _miscPortLineEdit   = new QLineEdit(settings.value("miscPort").toString());
381  _miscIntrComboBox   = new QComboBox();
382  _miscIntrComboBox->setEditable(false);
383  _miscIntrComboBox->addItems(QString(",2 sec,10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
384  int ll = _miscIntrComboBox->findText(settings.value("miscIntr").toString());
385  if (ll != -1) {
386    _miscIntrComboBox->setCurrentIndex(ll);
387  }
388  _miscScanRTCMCheckBox  = new QCheckBox();
389  _miscScanRTCMCheckBox->setCheckState(Qt::CheckState(
390                                    settings.value("miscScanRTCM").toInt()));
391
392  connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
393          this, SLOT(slotBncTextChanged()));
394
395  // Streams
396  // -------
397  _mountPointsTable   = new QTableWidget(0,9);
398
399  _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
400  _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
401  _mountPointsTable->horizontalHeader()->resizeSection(3,9*ww);
402  _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
403  _mountPointsTable->horizontalHeader()->resizeSection(5,7*ww);
404  _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
405  _mountPointsTable->horizontalHeader()->resizeSection(7,5*ww);
406  _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
407  _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
408  _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
409  _mountPointsTable->setHorizontalHeaderLabels(labels);
410  _mountPointsTable->setGridStyle(Qt::NoPen);
411  _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
412  _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
413  _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
414  _mountPointsTable->hideColumn(0);
415  _mountPointsTable->hideColumn(3);
416  connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
417          SLOT(slotSelectionChanged()));
418  populateMountPointsTable();
419
420  _log = new QTextEdit();
421  _log->setReadOnly(true);
422  QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
423  _log->setFont(msFont);
424  _log->document()->setMaximumBlockCount(1000);
425
426  // Combine Corrections
427  // -------------------
428  _cmbTable = new QTableWidget(0,3);
429  _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
430  _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
431  _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
432  _cmbTable->setMaximumWidth(30*ww);
433  _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
434  _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
435  _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
436  _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
437  _cmbTable->horizontalHeader()->setStretchLastSection(true);
438  _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
439
440  _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
441  _cmbUseGlonass     = new QCheckBox();
442  _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
443
444  _cmbSamplSpinBox = new QSpinBox;
445  _cmbSamplSpinBox->setMinimum(10);
446  _cmbSamplSpinBox->setMaximum(60);
447  _cmbSamplSpinBox->setSingleStep(10);
448  _cmbSamplSpinBox->setMaximumWidth(9*ww);
449  _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
450  _cmbSamplSpinBox->setSuffix(" sec");
451
452  QPushButton* addCmbRowButton = new QPushButton("Add Row");
453  QPushButton* delCmbRowButton = new QPushButton("Delete");
454
455  connect(_cmbTable, SIGNAL(itemSelectionChanged()),
456          SLOT(slotBncTextChanged()));
457
458  _cmbMethodComboBox = new QComboBox();
459  _cmbMethodComboBox->setEditable(false);
460  _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
461  int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
462  if (im != -1) {
463    _cmbMethodComboBox->setCurrentIndex(im);
464  }
465
466  int iRow = _cmbTable->rowCount();
467  if (iRow > 0) {
468    enableWidget(true, _cmbMethodComboBox);
469    enableWidget(true, _cmbMaxresLineEdit);
470    enableWidget(true, _cmbSamplSpinBox);
471    enableWidget(true, _cmbUseGlonass);
472  }
473  else {
474    enableWidget(false, _cmbMethodComboBox);
475    enableWidget(false, _cmbMaxresLineEdit);
476    enableWidget(false, _cmbSamplSpinBox);
477    enableWidget(false, _cmbUseGlonass);
478  }
479
480  // Upload Results
481  // -------------
482  _uploadTable = new QTableWidget(0,12);
483  _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
484  _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
485  _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
486  _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
487  _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
488  _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
489  _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
490  _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
491  _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
492  _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
493  _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
494  _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
495  _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
496  _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
497  _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
498  _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
499  _uploadTable->horizontalHeader()->setStretchLastSection(true);
500  _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
501
502  connect(_uploadTable, SIGNAL(itemSelectionChanged()),
503          SLOT(slotBncTextChanged()));
504
505  QPushButton* addUploadRowButton = new QPushButton("Add Row");
506  QPushButton* delUploadRowButton = new QPushButton("Del Row");
507  QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
508  _uploadIntrComboBox = new QComboBox;
509  _uploadIntrComboBox->setEditable(false);
510  _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
511  ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
512  if (ii != -1) {
513    _uploadIntrComboBox->setCurrentIndex(ii);
514  }
515
516  _uploadAntexFile      = new qtFileChooser(0, qtFileChooser::File);
517  _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
518
519  _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
520  _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
521  _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
522  _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
523  _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
524  _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
525  _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
526
527  _uploadSamplSp3SpinBox = new QSpinBox;
528  _uploadSamplSp3SpinBox->setMinimum(0);
529  _uploadSamplSp3SpinBox->setMaximum(15);
530  _uploadSamplSp3SpinBox->setSingleStep(1);
531  _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
532  _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
533  _uploadSamplSp3SpinBox->setSuffix(" min");
534
535  _uploadSamplClkRnxSpinBox = new QSpinBox;
536  _uploadSamplClkRnxSpinBox->setMinimum(0);
537  _uploadSamplClkRnxSpinBox->setMaximum(60);
538  _uploadSamplClkRnxSpinBox->setSingleStep(5);
539  _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
540  _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
541  _uploadSamplClkRnxSpinBox->setSuffix(" sec");
542
543  int iRowT = _uploadTable->rowCount();
544  if (iRowT > 0) {
545    enableWidget(true, _uploadIntrComboBox);
546    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
547    enableWidget(true, _uploadSamplSp3SpinBox);
548    enableWidget(true, _uploadSamplClkRnxSpinBox);
549    enableWidget(true, _uploadAntexFile);
550  }
551  else {
552    enableWidget(false, _uploadIntrComboBox);
553    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
554    enableWidget(false, _uploadSamplSp3SpinBox);
555    enableWidget(false, _uploadSamplClkRnxSpinBox);
556    enableWidget(false, _uploadAntexFile);
557  }
558
559  // Upload RTCM3 Ephemeris
560  // ----------------------
561  _uploadEphHostLineEdit       = new QLineEdit(settings.value("uploadEphHost").toString());
562  _uploadEphPortLineEdit       = new QLineEdit(settings.value("uploadEphPort").toString());
563  _uploadEphPasswordLineEdit   = new QLineEdit(settings.value("uploadEphPassword").toString());
564  _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
565  _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
566  _uploadEphSampleSpinBox      = new QSpinBox;
567  _uploadEphSampleSpinBox->setMinimum(5);
568  _uploadEphSampleSpinBox->setMaximum(60);
569  _uploadEphSampleSpinBox->setSingleStep(5);
570  _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
571  _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
572  _uploadEphSampleSpinBox->setSuffix(" sec");
573  _uploadEphBytesCounter       = new bncBytesCounter;
574
575  // Canvas with Editable Fields
576  // ---------------------------
577  _canvas = new QWidget;
578  setCentralWidget(_canvas);
579
580  _aogroup = new QTabWidget();
581  _aogroup->setElideMode(Qt::ElideNone);
582  _aogroup->setUsesScrollButtons(true);
583  QWidget* pgroup = new QWidget();
584  QWidget* ggroup = new QWidget();
585  QWidget* sgroup = new QWidget();
586  QWidget* egroup = new QWidget();
587  QWidget* agroup = new QWidget();
588  QWidget* cgroup = new QWidget();
589  QWidget* ogroup = new QWidget();
590  QWidget* rgroup = new QWidget();
591  QWidget* sergroup = new QWidget();
592  QWidget* pppGroup1 = new QWidget();
593  QWidget* pppGroup2 = new QWidget();
594  QWidget* pppGroup3 = new QWidget();
595  QWidget* pppGroup4 = new QWidget();
596  QWidget* reqcgroup = new QWidget();
597  QWidget* sp3CompGroup = new QWidget();
598  QWidget* cmbgroup = new QWidget();
599  QWidget* uploadgroup = new QWidget();
600  QWidget* uploadEphgroup = new QWidget();
601  _aogroup->addTab(pgroup,tr("Network"));
602  _aogroup->addTab(ggroup,tr("General"));
603  _aogroup->addTab(ogroup,tr("RINEX Observations"));
604  _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
605  _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
606  _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
607  _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
608  _aogroup->addTab(sgroup,tr("Feed Engine"));
609  _aogroup->addTab(sergroup,tr("Serial Output"));
610  _aogroup->addTab(agroup,tr("Outages"));
611  _aogroup->addTab(rgroup,tr("Miscellaneous"));
612  _aogroup->addTab(pppGroup1,tr("PPP (1)"));
613  _aogroup->addTab(pppGroup2,tr("PPP (2)"));
614  _aogroup->addTab(pppGroup3,tr("PPP (3)"));
615  _aogroup->addTab(pppGroup4,tr("PPP (4)"));
616  _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
617  _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
618  _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
619
620  // Log Tab
621  // -------
622  _loggroup = new QTabWidget();
623  _loggroup->addTab(_log,tr("Log"));
624  _loggroup->addTab(_bncFigure,tr("Throughput"));
625  _loggroup->addTab(_bncFigureLate,tr("Latency"));
626  _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
627
628  // Netowork (Proxy and SSL) Tab
629  // ----------------------------
630  QGridLayout* pLayout = new QGridLayout;
631  pLayout->setColumnMinimumWidth(0,13*ww);
632  _proxyPortLineEdit->setMaximumWidth(9*ww);
633
634  pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
635  pLayout->addWidget(new QLabel("Proxy host"),                               1, 0);
636  pLayout->addWidget(_proxyHostLineEdit,                                     1, 1, 1,10);
637  pLayout->addWidget(new QLabel("Proxy port"),                               2, 0);
638  pLayout->addWidget(_proxyPortLineEdit,                                     2, 1);
639  pLayout->addWidget(new QLabel("Path to SSL certificates"),                 3, 0);
640  pLayout->addWidget(_sslCaCertPathLineEdit,                                 3, 1, 1,10);
641  pLayout->addWidget(new QLabel("Default:  " + bncSslConfig::defaultPath()), 3,11, 1,20);
642  pLayout->addWidget(new QLabel("Ignore SSL authorization errors"),          4, 0);
643  pLayout->addWidget(_sslIgnoreErrorsCheckBox,                               4, 1, 1,10);
644  pLayout->addWidget(new QLabel(""),                                         5, 1);
645  pLayout->setRowStretch(6, 999);
646
647  pgroup->setLayout(pLayout);
648
649  // General Tab
650  // -----------
651  QGridLayout* gLayout = new QGridLayout;
652  gLayout->setColumnMinimumWidth(0,14*ww);
653  _onTheFlyComboBox->setMaximumWidth(9*ww);
654
655  gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, auto-start, and raw file output.<br>"),0, 0, 1, 50);
656  gLayout->addWidget(new QLabel("Logfile (full path)"),          1, 0);
657  gLayout->addWidget(_logFileLineEdit,                           1, 1, 1,20);
658  gLayout->addWidget(new QLabel("Append files"),                 2, 0);
659  gLayout->addWidget(_rnxAppendCheckBox,                         2, 1);
660  gLayout->addWidget(new QLabel("Reread configuration"),         3, 0);
661  gLayout->addWidget(_onTheFlyComboBox,                          3, 1);
662  gLayout->addWidget(new QLabel("Auto start"),                   4, 0);
663  gLayout->addWidget(_autoStartCheckBox,                         4, 1);
664  gLayout->addWidget(new QLabel("Raw output file (full path)"),  5, 0);
665  gLayout->addWidget(_rawOutFileLineEdit,                        5, 1, 1,20);
666  gLayout->addWidget(new QLabel(""),                             6, 1);
667  gLayout->setRowStretch(7, 999);
668
669  ggroup->setLayout(gLayout);
670
671  // RINEX Observations
672  // ------------------
673  QGridLayout* oLayout = new QGridLayout;
674  oLayout->setColumnMinimumWidth(0,14*ww);
675  _rnxIntrComboBox->setMaximumWidth(9*ww);
676  _rnxSamplSpinBox->setMaximumWidth(9*ww);
677
678  oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
679  oLayout->addWidget(new QLabel("Directory"),                      1, 0);
680  oLayout->addWidget(_rnxPathLineEdit,                             1, 1, 1, 15);
681  oLayout->addWidget(new QLabel("Interval"),                       2, 0);
682  oLayout->addWidget(_rnxIntrComboBox,                             2, 1);
683  oLayout->addWidget(new QLabel("  Sampling"),                     2, 2, Qt::AlignRight);
684  oLayout->addWidget(_rnxSamplSpinBox,                             2, 3, Qt::AlignLeft);
685  oLayout->addWidget(new QLabel("Skeleton extension"),             3, 0);
686  oLayout->addWidget(_rnxSkelLineEdit,                             3, 1, Qt::AlignLeft);
687  oLayout->addWidget(new QLabel("Skeleton mandatory"),             3, 2);
688  oLayout->addWidget(_rnxFileCheckBox,                             3, 3);
689  oLayout->addWidget(new QLabel("Script (full path)"),             4, 0);
690  oLayout->addWidget(_rnxScrpLineEdit,                             4, 1, 1, 15);
691  oLayout->addWidget(new QLabel("Version 2 signal priority"),      5, 0);
692  oLayout->addWidget(_rnxV2Priority,                               5, 1, 1, 15);
693  oLayout->addWidget(new QLabel("Version 3"),                      6, 0);
694  oLayout->addWidget(_rnxV3CheckBox,                               6, 1);
695  oLayout->addWidget(new QLabel(""),                               7, 1);
696  oLayout->setRowStretch(8, 999);
697
698  ogroup->setLayout(oLayout);
699
700  // RINEX Ephemeris
701  // ---------------
702  QGridLayout* eLayout = new QGridLayout;
703  eLayout->setColumnMinimumWidth(0,14*ww);
704  _ephIntrComboBox->setMaximumWidth(9*ww);
705  _ephOutPortLineEdit->setMaximumWidth(9*ww);
706
707  eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
708  eLayout->addWidget(new QLabel("Directory"),                     1, 0);
709  eLayout->addWidget(_ephPathLineEdit,                            1, 1, 1,30);
710  eLayout->addWidget(new QLabel("Interval"),                      2, 0);
711  eLayout->addWidget(_ephIntrComboBox,                            2, 1);
712  eLayout->addWidget(new QLabel("Port"),                          3, 0);
713  eLayout->addWidget(_ephOutPortLineEdit,                         3, 1);
714  eLayout->addWidget(new QLabel("Version 3"),                     4, 0);
715  eLayout->addWidget(_ephV3CheckBox,                              4, 1);
716  eLayout->setRowStretch(5, 999);
717
718  egroup->setLayout(eLayout);
719
720
721  // Broadcast Corrections
722  // ---------------------
723  QGridLayout* cLayout = new QGridLayout;
724  cLayout->setColumnMinimumWidth(0,14*ww);
725  _corrIntrComboBox->setMaximumWidth(9*ww);
726  _corrPortLineEdit->setMaximumWidth(9*ww);
727
728  cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
729  cLayout->addWidget(new QLabel("Directory, ASCII"),              1, 0);
730  cLayout->addWidget(_corrPathLineEdit,                           1, 1, 1,30);
731  cLayout->addWidget(new QLabel("Interval"),                      2, 0);
732  cLayout->addWidget(_corrIntrComboBox,                           2, 1);
733  cLayout->addWidget(new QLabel("Port"),                          3, 0);
734  cLayout->addWidget(_corrPortLineEdit,                           3, 1);
735  cLayout->addWidget(new QLabel(""),                              4, 1);
736  cLayout->setRowStretch(7, 999);
737  cgroup->setLayout(cLayout);
738
739  // Feed Engine
740  // -----------
741  QGridLayout* sLayout = new QGridLayout;
742  sLayout->setColumnMinimumWidth(0,14*ww);
743  _outPortLineEdit->setMaximumWidth(9*ww);
744  _outWaitSpinBox->setMaximumWidth(9*ww);
745  _outSamplSpinBox->setMaximumWidth(9*ww);
746  _outUPortLineEdit->setMaximumWidth(9*ww);
747
748  sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
749  sLayout->addWidget(new QLabel("Port"),                            1, 0);
750  sLayout->addWidget(_outPortLineEdit,                              1, 1);
751  sLayout->addWidget(new QLabel("       Wait for full obs epoch"),  1, 2, Qt::AlignRight);
752  sLayout->addWidget(_outWaitSpinBox,                              1, 3, Qt::AlignLeft);
753  sLayout->addWidget(new QLabel("Sampling"),                        2, 0);
754  sLayout->addWidget(_outSamplSpinBox,                              2, 1, Qt::AlignLeft);
755  sLayout->addWidget(new QLabel("File (full path)"),                3, 0);
756  sLayout->addWidget(_outFileLineEdit,                              3, 1, 1, 10);
757  sLayout->addWidget(new QLabel("Port (unsynchronized)"),           4, 0);
758  sLayout->addWidget(_outUPortLineEdit,                             4, 1);
759  sLayout->addWidget(new QLabel(""),                                5, 1);
760  sLayout->setRowStretch(6, 999);
761
762  sgroup->setLayout(sLayout);
763
764  // Serial Output
765  // -------------
766  QGridLayout* serLayout = new QGridLayout;
767  serLayout->setColumnMinimumWidth(0,12*ww);
768  _serialBaudRateComboBox->setMaximumWidth(9*ww);
769  _serialFlowControlComboBox->setMaximumWidth(11*ww);
770  _serialDataBitsComboBox->setMaximumWidth(5*ww);
771  _serialParityComboBox->setMaximumWidth(9*ww);
772  _serialStopBitsComboBox->setMaximumWidth(5*ww);
773  _serialAutoNMEAComboBox->setMaximumWidth(14*ww);
774  _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
775  _serialManualNMEASamplingSpinBox->setMaximumWidth(8*ww);
776
777  serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
778  serLayout->addWidget(new QLabel("Mountpoint"),                  1, 0, Qt::AlignLeft);
779  serLayout->addWidget(_serialMountPointLineEdit,                 1, 1, 1, 2);
780  serLayout->addWidget(new QLabel("Port name"),                   2, 0, Qt::AlignLeft);
781  serLayout->addWidget(_serialPortNameLineEdit,                   2, 1, 1, 2);
782  serLayout->addWidget(new QLabel("Baud rate"),                   3, 0, Qt::AlignLeft);
783  serLayout->addWidget(_serialBaudRateComboBox,                   3, 1);
784  serLayout->addWidget(new QLabel("Flow control"),                3, 2, Qt::AlignRight);
785  serLayout->addWidget(_serialFlowControlComboBox,                3, 3);
786  serLayout->addWidget(new QLabel("Data bits"),                   4, 0, Qt::AlignLeft);
787  serLayout->addWidget(_serialDataBitsComboBox,                   4, 1);
788  serLayout->addWidget(new QLabel("Parity"),                      4, 2, Qt::AlignRight);
789  serLayout->addWidget(_serialParityComboBox,                     4, 3);
790  serLayout->addWidget(new QLabel("   Stop bits"),                4, 4, Qt::AlignRight);
791  serLayout->addWidget(_serialStopBitsComboBox,                   4, 5);
792  serLayout->addWidget(new QLabel("NMEA"),                        5, 0);
793  serLayout->addWidget(_serialAutoNMEAComboBox,                   5, 1);
794  serLayout->addWidget(new QLabel("    File (full path)"),        5, 2, Qt::AlignRight);
795  serLayout->addWidget(_serialFileNMEALineEdit,                   5, 3, 1,10);
796  serLayout->addWidget(new QLabel("Height"),                      5,14, Qt::AlignRight);
797  serLayout->addWidget(_serialHeightNMEALineEdit,                 5,15, 1,11);
798  serLayout->addWidget(new QLabel("Sampling"),                    5,25, Qt::AlignRight);
799  serLayout->addWidget(_serialManualNMEASamplingSpinBox,          5,26, 1,12);
800  serLayout->addWidget(new QLabel(""),                            6, 1);
801  serLayout->setRowStretch(7, 999);
802
803  sergroup->setLayout(serLayout);
804
805  // Outages
806  // -------
807  QGridLayout* aLayout = new QGridLayout;
808  aLayout->setColumnMinimumWidth(0,14*ww);
809  _adviseObsRateComboBox->setMaximumWidth(9*ww);
810  _adviseFailSpinBox->setMaximumWidth(9*ww);
811  _adviseRecoSpinBox->setMaximumWidth(9*ww);
812
813  aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
814  aLayout->addWidget(new QLabel("Observation rate"),              1, 0);
815  aLayout->addWidget(_adviseObsRateComboBox,                      1, 1);
816  aLayout->addWidget(new QLabel("Failure threshold"),             2, 0);
817  aLayout->addWidget(_adviseFailSpinBox,                          2, 1);
818  aLayout->addWidget(new QLabel("Recovery threshold"),            3, 0);
819  aLayout->addWidget(_adviseRecoSpinBox,                          3, 1);
820  aLayout->addWidget(new QLabel("Script (full path)"),            4, 0);
821  aLayout->addWidget(_adviseScriptLineEdit,                       4, 1, 1,20);
822  aLayout->addWidget(new QLabel(""),                              5, 1);
823  aLayout->setRowStretch(6, 999);
824
825  agroup->setLayout(aLayout);
826
827  // Miscellaneous
828  // -------------
829  QGridLayout* rLayout = new QGridLayout;
830  rLayout->setColumnMinimumWidth(0,14*ww);
831  _miscIntrComboBox->setMaximumWidth(9*ww);
832  _miscPortLineEdit->setMaximumWidth(9*ww);
833
834  rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
835  rLayout->addWidget(new QLabel("Mountpoint"),                    1, 0);
836  rLayout->addWidget(_miscMountLineEdit,                          1, 1, 1, 7);
837  rLayout->addWidget(new QLabel("Log latency"),                   2, 0);
838  rLayout->addWidget(_miscIntrComboBox,                           2, 1);
839  rLayout->addWidget(new QLabel("Scan RTCM"),                     3, 0);
840  rLayout->addWidget(_miscScanRTCMCheckBox,                       3, 1);
841  rLayout->addWidget(new QLabel("Port"),                          4, 0);
842  rLayout->addWidget(_miscPortLineEdit,                           4, 1);
843  rLayout->addWidget(new QLabel(""),                              5, 1);
844  rLayout->setRowStretch(6, 999);
845
846  rgroup->setLayout(rLayout);
847
848  // PPP
849  // ---
850  _pppWidgets._dataSource->setMaximumWidth(20*ww);
851  _pppWidgets._corrMount->setMaximumWidth(20*ww);
852
853  _pppWidgets._corrFile->setMaximumWidth(35*ww);
854  _pppWidgets._crdFile->setMaximumWidth(35*ww);
855  _pppWidgets._logPath->setMaximumWidth(35*ww);
856  _pppWidgets._snxtroPath->setMaximumWidth(35*ww);
857  _pppWidgets._snxtroIntr->setMaximumWidth(10*ww);
858  _pppWidgets._snxtroAc  ->setMaximumWidth(10*ww);
859  _pppWidgets._snxtroSol ->setMaximumWidth(7*ww);
860
861  QGridLayout* pppLayout1 = new QGridLayout();
862  int ir = 0;
863  pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output."), ir, 0, 1, 7, Qt::AlignLeft);
864  ++ir;
865  pppLayout1->addWidget(new QLabel("Data source"),           ir, 0);
866  pppLayout1->addWidget(_pppWidgets._dataSource,             ir, 1);
867  pppLayout1->addWidget(new QLabel("   RINEX Obs file"),     ir, 3);
868  pppLayout1->addWidget(_pppWidgets._rinexObs,               ir, 4, 1, 3);
869  ++ir;
870  pppLayout1->addWidget(new QLabel("Corrections stream"),    ir, 0);
871  pppLayout1->addWidget(_pppWidgets._corrMount,              ir, 1);
872  pppLayout1->addWidget(new QLabel("   RINEX Nav file"),     ir, 3);
873  pppLayout1->addWidget(_pppWidgets._rinexNav,               ir, 4, 1, 3);
874  ++ir;
875  pppLayout1->addWidget(new QLabel("Corrections file"),      ir, 0);
876  pppLayout1->addWidget(_pppWidgets._corrFile,               ir, 1);
877  pppLayout1->addWidget(new QLabel("   ANTEX file"),         ir, 3);
878  pppLayout1->addWidget(_pppWidgets._antexFile,              ir, 4, 1, 3);
879  ++ir;
880  pppLayout1->addWidget(new QLabel("Coordinates file"),      ir, 0);
881  pppLayout1->addWidget(_pppWidgets._crdFile,                ir, 1);
882  pppLayout1->addWidget(new QLabel("   Version 3 filenames"),ir, 3);
883  pppLayout1->addWidget(_pppWidgets._v3filenames,            ir, 4, 1, 3);
884  ++ir;
885  pppLayout1->addWidget(new QLabel("Logfile directory"),     ir, 0);
886  pppLayout1->addWidget(_pppWidgets._logPath,                ir, 1);
887  pppLayout1->addWidget(new QLabel("   NMEA directory"),     ir, 3);
888  pppLayout1->addWidget(_pppWidgets._nmeaPath,               ir, 4, 1, 3);
889  ++ir;
890  pppLayout1->addWidget(new QLabel("SNX TRO directory"),     ir, 0);
891  pppLayout1->addWidget(_pppWidgets._snxtroPath,             ir, 1);
892  pppLayout1->addWidget(new QLabel("   SNX TRO interval"),   ir, 3);
893  pppLayout1->addWidget(_pppWidgets._snxtroIntr,             ir, 4);
894  pppLayout1->addWidget(new QLabel("   SNX TRO sampling"),   ir, 5);
895  pppLayout1->addWidget(_pppWidgets._snxtroSampl,            ir, 6, Qt::AlignRight);
896  ++ir;
897  pppLayout1->addWidget(new QLabel("   SNX TRO AC"),         ir, 3);
898  pppLayout1->addWidget(_pppWidgets._snxtroAc,               ir, 4);
899  pppLayout1->addWidget(new QLabel("   SNX TRO solution")    ,ir, 5);
900  pppLayout1->addWidget(_pppWidgets._snxtroSol,              ir, 6, Qt::AlignRight);
901  pppLayout1->setRowStretch(ir, 999);
902
903  pppGroup1->setLayout(pppLayout1);
904
905  QVBoxLayout* pppLayout2 = new QVBoxLayout();
906  pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
907  pppLayout2->addWidget(_pppWidgets._staTable, 99);
908  QHBoxLayout* pppLayout2sub = new QHBoxLayout();
909  pppLayout2sub->addWidget(_pppWidgets._addStaButton);
910  pppLayout2sub->addWidget(_pppWidgets._delStaButton);
911  pppLayout2sub->addStretch(99);
912
913  pppLayout2->addLayout(pppLayout2sub);
914
915  pppGroup2->setLayout(pppLayout2);
916
917  QGridLayout* pppLayout3 = new QGridLayout();
918  ir = 0;
919  pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
920  ++ir;
921  pppLayout3->addWidget(new QLabel("GPS LCs"),              ir, 0, Qt::AlignLeft);
922  pppLayout3->addWidget(_pppWidgets._lcGPS,                 ir, 1);
923  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 2);
924  pppLayout3->addWidget(new QLabel("Sigma C1"),             ir, 3, Qt::AlignLeft);
925  pppLayout3->addWidget(_pppWidgets._sigmaC1,               ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
926  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 5);
927  pppLayout3->addWidget(new QLabel("Sigma L1"),             ir, 6, Qt::AlignLeft);
928  pppLayout3->addWidget(_pppWidgets._sigmaL1,               ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
929  ++ir;
930  pppLayout3->addWidget(new QLabel("GLONASS LCs"),          ir, 0, Qt::AlignLeft);
931  pppLayout3->addWidget(_pppWidgets._lcGLONASS,             ir, 1);
932  pppLayout3->addWidget(new QLabel("Max Res C1"),           ir, 3, Qt::AlignLeft);
933  pppLayout3->addWidget(_pppWidgets._maxResC1,              ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
934  pppLayout3->addWidget(new QLabel("Max Res L1"),           ir, 6, Qt::AlignLeft);
935  pppLayout3->addWidget(_pppWidgets._maxResL1,              ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
936  ++ir;
937  pppLayout3->addWidget(new QLabel("Galileo LCs"),          ir, 0, Qt::AlignLeft);
938  pppLayout3->addWidget(_pppWidgets._lcGalileo,             ir, 1);
939  pppLayout3->addWidget(new QLabel("Ele Wgt Code"),         ir, 3, Qt::AlignLeft);
940  pppLayout3->addWidget(_pppWidgets._eleWgtCode,            ir, 4);
941  pppLayout3->addWidget(new QLabel("Ele Wgt Phase"),        ir, 6, Qt::AlignLeft);
942  pppLayout3->addWidget(_pppWidgets._eleWgtPhase,           ir, 7);
943  ++ir;
944  pppLayout3->addWidget(new QLabel("BDS LCs"),              ir, 0, Qt::AlignLeft);
945  pppLayout3->addWidget(_pppWidgets._lcBDS,                 ir, 1);
946  pppLayout3->addWidget(new QLabel("Min # of Obs"),         ir, 3, Qt::AlignLeft);
947  pppLayout3->addWidget(_pppWidgets._minObs,                ir, 4);
948  pppLayout3->addWidget(new QLabel("Min Elevation"),        ir, 6, Qt::AlignLeft);
949  pppLayout3->addWidget(_pppWidgets._minEle,                ir, 7);
950  ++ir;
951  pppLayout3->addWidget(new QLabel("Wait for clock corr."), ir, 0, Qt::AlignLeft);
952  pppLayout3->addWidget(_pppWidgets._corrWaitTime,          ir, 1);
953  pppLayout3->addWidget(new QLabel("Seeding (sec)"),        ir, 3, Qt::AlignLeft);
954  pppLayout3->addWidget(_pppWidgets._seedingTime,           ir, 4);
955  ++ir;
956  pppLayout3->addWidget(new QLabel(""),                     ir, 8);
957  pppLayout3->setColumnStretch(8, 999);
958  ++ir;
959  pppLayout3->addWidget(new QLabel(""),                      ir, 1);
960  pppLayout3->setRowStretch(ir, 999);
961
962  pppGroup3->setLayout(pppLayout3);
963
964  // ------------------------
965  connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
966  _pppWidgets._mapSpeedSlider->setMinimumWidth(33*ww);
967  _pppWidgets._audioResponse->setMaximumWidth(8*ww);
968
969  QGridLayout* pppLayout4 = new QGridLayout();
970  ir = 0;
971  pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
972  ++ir;
973  pppLayout4->addWidget(new QLabel("PPP Plot"),                          ir, 0, Qt::AlignLeft);
974  pppLayout4->addWidget(_pppWidgets._plotCoordinates,                    ir, 1, Qt::AlignLeft);
975  pppLayout4->addWidget(new QLabel("Mountpoint"),                        ir, 2, 1, 10, Qt::AlignLeft);
976  pppLayout4->addWidget(_pppWidgets._audioResponse,                      ir, 4, Qt::AlignLeft);
977  pppLayout4->addWidget(new QLabel("Audio response"),                    ir, 5, Qt::AlignRight);
978
979  ++ir;
980  pppLayout4->addWidget(new QLabel("Track map"),                         ir, 0, Qt::AlignLeft);
981  pppLayout4->addWidget(_pppWidgets._mapWinButton,                       ir, 1, Qt::AlignLeft);
982  pppLayout4->addWidget(new QLabel("OSM"),                               ir, 2, Qt::AlignLeft);
983  pppLayout4->addWidget(_pppWidgets._useOpenStreetMap,                   ir, 3, Qt::AlignLeft);
984  pppLayout4->addWidget(new QLabel("Google"),                            ir, 3, Qt::AlignRight);
985  pppLayout4->addWidget(_pppWidgets._useGoogleMap,                       ir, 4, Qt::AlignLeft);
986  ++ir;
987  pppLayout4->addWidget(new QLabel("Dot-properties"),                    ir, 0, Qt::AlignLeft);
988  pppLayout4->addWidget(_pppWidgets._mapWinDotSize,                      ir, 1, Qt::AlignLeft);
989  pppLayout4->addWidget(new QLabel("Size    "),                          ir, 2, Qt::AlignLeft);
990  pppLayout4->addWidget(_pppWidgets._mapWinDotColor,                     ir, 3, Qt::AlignLeft);
991  pppLayout4->addWidget(new QLabel("Color"),                             ir, 4, Qt::AlignLeft);
992  ++ir;
993  pppLayout4->addWidget(new QLabel("Post-processing speed"),             ir, 0, Qt::AlignLeft);
994  pppLayout4->addWidget(_pppWidgets._mapSpeedSlider,                     ir, 1, 1, 20, Qt::AlignLeft);
995  ++ir;
996  pppLayout4->addWidget(new QLabel(""),                                  ir, 1);
997  pppLayout4->setRowStretch(ir, 999);
998
999  pppGroup4->setLayout(pppLayout4);
1000
1001  // Reqc Processing
1002  // ---------------
1003  _reqcActionComboBox = new QComboBox();
1004  _reqcActionComboBox->setEditable(false);
1005  _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1006  int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1007  if (ik != -1) {
1008    _reqcActionComboBox->setCurrentIndex(ik);
1009  }
1010  connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1011          this, SLOT(slotBncTextChanged()));
1012
1013  QGridLayout* reqcLayout = new QGridLayout;
1014  _reqcActionComboBox->setMinimumWidth(15*ww);
1015  _reqcActionComboBox->setMaximumWidth(20*ww);
1016
1017  _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1018  _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1019
1020  _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1021  _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1022  _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1023  _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1024  _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1025  _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1026  _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1027
1028  connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1029          this, SLOT(slotBncTextChanged()));
1030
1031  _reqcLogSummaryOnly = new QCheckBox();
1032  _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1033
1034  ir = 0;
1035  reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1036  ++ir;
1037  reqcLayout->addWidget(new QLabel("Action"),                    ir, 0);
1038  reqcLayout->addWidget(_reqcActionComboBox,                     ir, 1);
1039  _reqcEditOptionButton = new QPushButton("Set Edit Options");
1040  _reqcEditOptionButton->setMinimumWidth(15*ww);
1041  _reqcEditOptionButton->setMaximumWidth(20*ww);
1042
1043  reqcLayout->addWidget(_reqcEditOptionButton,                   ir, 3);
1044  ++ir;
1045  reqcLayout->addWidget(new QLabel("Input files (full path)"),   ir, 0);
1046  reqcLayout->addWidget(_reqcObsFileChooser,                     ir, 1);
1047  _reqcObsFileChooser->setMaximumWidth(40*ww);
1048  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1049  reqcLayout->addWidget(_reqcNavFileChooser,                     ir, 3);
1050  _reqcNavFileChooser->setMaximumWidth(40*ww);
1051  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1052  ++ir;
1053  reqcLayout->addWidget(new QLabel("Output file (full path)"),   ir, 0);
1054  reqcLayout->addWidget(_reqcOutObsLineEdit,                     ir, 1);
1055  _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1056  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1057  reqcLayout->addWidget(_reqcOutNavLineEdit,                     ir, 3);
1058  _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1059  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1060  ++ir;
1061  reqcLayout->addWidget(new QLabel("Logfile"),                   ir, 0);
1062  reqcLayout->addWidget(_reqcOutLogLineEdit,                     ir, 1);
1063  _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1064  reqcLayout->addWidget(new QLabel("  Summary only"),            ir, 2);
1065  reqcLayout->addWidget(_reqcLogSummaryOnly,                     ir, 3);
1066  ++ir;
1067  reqcLayout->addWidget(new QLabel("Plots for signals"),         ir, 0);
1068  reqcLayout->addWidget(_reqcSkyPlotSignals,                     ir, 1);
1069  _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1070  ++ir;
1071  reqcLayout->addWidget(new QLabel("Directory for plots"),       ir, 0);
1072  reqcLayout->addWidget(_reqcPlotDirLineEdit,                    ir, 1);
1073  _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1074  ++ir;
1075  reqcLayout->setRowStretch(ir, 999);
1076
1077  reqcLayout->setColumnMinimumWidth(2, 8*ww);
1078  reqcLayout->setColumnMinimumWidth(4, 8*ww);
1079
1080  reqcgroup->setLayout(reqcLayout);
1081
1082  connect(_reqcEditOptionButton, SIGNAL(clicked()),
1083          this, SLOT(slotReqcEditOption()));
1084
1085  QGridLayout* sp3CompLayout = new QGridLayout;
1086
1087  _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1088  _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1089  _sp3CompFileChooser->setMinimumWidth(15*ww);
1090  _sp3CompFileChooser->setMaximumWidth(40*ww);
1091
1092  _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1093  _sp3CompExclude->setMinimumWidth(18*ww);
1094  _sp3CompExclude->setMaximumWidth(18*ww);
1095
1096  _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1097  _sp3CompLogLineEdit->setMinimumWidth(18*ww);
1098  _sp3CompLogLineEdit->setMaximumWidth(18*ww);
1099
1100  ir = 0;
1101  sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"),  ir, 0, 1, 40);
1102  ++ir;
1103  sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"),  ir, 0, Qt::AlignLeft);
1104  sp3CompLayout->addWidget(_sp3CompFileChooser,                        ir, 1, 1, 20);
1105  ++ir;
1106  sp3CompLayout->addWidget(new QLabel("Exclude satellites"),           ir, 0, Qt::AlignLeft);
1107  sp3CompLayout->addWidget(_sp3CompExclude,                            ir, 1, Qt::AlignRight);
1108  ++ir;
1109  sp3CompLayout->addWidget(new QLabel("Logfile"),                      ir, 0, Qt::AlignLeft);
1110  sp3CompLayout->addWidget(_sp3CompLogLineEdit,                        ir, 1, Qt::AlignRight);
1111  ++ir;
1112  sp3CompLayout->addWidget(new QLabel(""),                             ir, 1);
1113  ++ir;
1114  sp3CompLayout->setRowStretch(ir, 999);
1115
1116  sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1117  sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1118
1119  sp3CompGroup->setLayout(sp3CompLayout);
1120
1121  connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1122          this, SLOT(slotBncTextChanged()));
1123
1124  // Combine Corrections
1125  // -------------------
1126  QGridLayout* cmbLayout = new QGridLayout;
1127
1128  populateCmbTable();
1129  cmbLayout->addWidget(_cmbTable,                                            0, 0, 8, 3);
1130  cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1131  cmbLayout->addWidget(addCmbRowButton,                                      2, 6);
1132  cmbLayout->addWidget(delCmbRowButton,                                      2, 7);
1133  cmbLayout->addWidget(new QLabel("Method"),                                 3, 6, Qt::AlignRight);
1134  cmbLayout->addWidget(_cmbMethodComboBox,                                   3, 7);
1135  cmbLayout->addWidget(new QLabel(" Maximal residuum"),                      4, 6, Qt::AlignRight);
1136  cmbLayout->addWidget(_cmbMaxresLineEdit,                                   4, 7, Qt::AlignRight);
1137  cmbLayout->addWidget(new QLabel("Sampling"),                               5, 6, Qt::AlignRight);
1138  cmbLayout->addWidget(_cmbSamplSpinBox,                                     5, 7);
1139  cmbLayout->addWidget(new QLabel("   Use GLONASS"),                         6, 6, Qt::AlignRight);
1140  cmbLayout->addWidget(_cmbUseGlonass,                                       6, 7);
1141  cmbLayout->setRowStretch(7, 999);
1142
1143  connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1144  connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1145
1146  cmbgroup->setLayout(cmbLayout);
1147
1148  // Upload Layout (Clocks)
1149  // ----------------------
1150  QGridLayout* uploadHlpLayout = new QGridLayout();
1151
1152  connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1153  connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1154  connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1155
1156  uploadHlpLayout->addWidget(addUploadRowButton,                  0, 0);
1157  uploadHlpLayout->addWidget(delUploadRowButton,                  0, 1);
1158  uploadHlpLayout->addWidget(new QLabel("Interval"),              0, 2, Qt::AlignRight);
1159  uploadHlpLayout->addWidget(_uploadIntrComboBox,                 0, 3);
1160  uploadHlpLayout->addWidget(new QLabel("     Sampling:    Orb"), 0, 4, Qt::AlignRight);
1161  uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox,      0, 5);
1162  uploadHlpLayout->addWidget(new QLabel("SP3"),                   0, 6, Qt::AlignRight);
1163  uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox,              0, 7);
1164  uploadHlpLayout->addWidget(new QLabel("RNX"),                   0, 8, Qt::AlignRight);
1165  uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox,           0, 9);
1166  uploadHlpLayout->addWidget(setUploadTrafoButton,                0,10);
1167  uploadHlpLayout->addWidget(new QLabel("ANTEX file"),            1, 0, Qt::AlignLeft);
1168  uploadHlpLayout->addWidget(_uploadAntexFile,                    1, 1, 1, 4);
1169
1170  QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1171  populateUploadTable();
1172
1173  uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1174  uploadLayout->addWidget(_uploadTable);
1175  uploadLayout->addLayout(uploadHlpLayout);
1176
1177  uploadgroup->setLayout(uploadLayout);
1178
1179  // Upload Layout (Ephemeris)
1180  // -------------------------
1181  QGridLayout* uploadLayoutEph = new QGridLayout;
1182
1183  uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1184  _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1185  _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1186  _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1187
1188  uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"), 0, 0, 1, 50);
1189  uploadLayoutEph->addWidget(new QLabel("Host"),                  1, 0);
1190  uploadLayoutEph->addWidget(_uploadEphHostLineEdit,              1, 1, 1, 3);
1191  uploadLayoutEph->addWidget(new QLabel("  Port"),                1, 4, Qt::AlignRight);
1192  uploadLayoutEph->addWidget(_uploadEphPortLineEdit,              1, 5, 1, 1);
1193  uploadLayoutEph->addWidget(new QLabel("Mountpoint           "), 2, 0);
1194  uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit,        2, 1);
1195  uploadLayoutEph->addWidget(new QLabel("          Password"),    2, 2, Qt::AlignRight);
1196  uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit,          2, 3);
1197  uploadLayoutEph->addWidget(new QLabel("Sampling"),              3, 0);
1198  uploadLayoutEph->addWidget(_uploadEphSampleSpinBox,             3, 1);
1199  uploadLayoutEph->addWidget(new QLabel("Uploaded"),              4, 0);
1200  uploadLayoutEph->addWidget(_uploadEphBytesCounter,              4, 1);
1201  uploadLayoutEph->setRowStretch(5, 999);
1202
1203  uploadEphgroup->setLayout(uploadLayoutEph);
1204
1205  connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1206          this, SLOT(slotBncTextChanged()));
1207
1208  // Main Layout
1209  // -----------
1210  QGridLayout* mLayout = new QGridLayout;
1211  _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1212  mLayout->addWidget(_aogroup,            0,0);
1213  mLayout->addWidget(_mountPointsTable,   1,0);
1214  _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1215  mLayout->addWidget(_loggroup,           2,0);
1216
1217  _canvas->setLayout(mLayout);
1218
1219  // WhatsThis, Network
1220  // ------------------
1221  _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1222  _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1223  _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure whether this is supported by the involved Ntrip Broadcaster.</p><p>Note that SSL communication is usually done over port 443.</p>"));
1224  _sslIgnoreErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization errors' if you don't want to be bothered with this.</p>"));
1225
1226  // WhatsThis, General
1227  // ------------------
1228  _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path for that is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date.</p>"));
1229  _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and file content already available under the same name will be overwritten. However, users might want to append already existing files following a regular restart or a crash of BNC or its platform.</p><p>Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1230  _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, five minutes, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately via button 'Save & Reread Configuration'.</p>"));
1231  _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1232  _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p><p>This option is primarily meant for debugging purposes.</p>"));
1233
1234  // WhatsThis, RINEX Observations
1235  // -----------------------------
1236  _rnxPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where the RINEX Observation files will be stored.</p><p>If the specified directory does not exist, BNC will not create RINEX Observation files.</p>"));
1237  _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1238  _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all received epochs into RINEX Observation files.</p>"));
1239  _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal RINEX skeleton files that contain the RINEX header records you would like to include. You can derive a skeleton file from information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' skl or SKL is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream. In case of 'SKL'/'skl' the 4-char ID forming the base name has to be written in upper/lower cases. </p>"));
1240  _rnxFileCheckBox->setWhatsThis(tr("<p>Tick check box 'Skeleton mandatory' in case you want that RINEX files are only produced if skeleton files are available for BNC. If no skeleton file is available for a particular source then no RINEX Observation file will be produced from the affected stream.</p><p>Note that a skeleton file contains RINEX header information such as receiver and antenna types. In case of stream conversion to RINEX Version 3, a skeleton file should also contain information on potentially available observation types. A missing skeleton file will therefore enforce BNC to only save a default set of RINEX 3 observation types.</p>"));
1241  _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is finally saved, you may want to compress, copy or upload it immediately, for example via FTP. BNC allows you to execute a script/batch file to carry out such operation.</p><p>Specify the full path of a script or batch file. BNC will pass the full RINEX Observation file path to the script as command line parameter (%1 on Windows systems, $1 on Unix/Linux/Mac systems).</p>"));
1242  _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified as equal for all systems, as system specific or as system and freq. specific. For example: </li><ul><li>'CWPX_?' (General signal priorities valid for all GNSS) </li><li>'C:IQX I:ABCX' (System specific signal priorities for BDS and IRNSS) </li><li>'G:12&PWCSLXYN G:5&IQX R:12&PC R:3&IQX' (System and frequency specific signal priorities) </li></ul>Default is the following priority list 'G:12&PWCSLXYN_ G:5&IQX_ R:12&PC_ R:3&IQX_ E:16&BCX_ E:578&IQX_ J:1&SLXCZ_ J:26&SLX_ J:5&IQX_ C:IQX_ I:ABCX_ S:1&C_ S:5&IQX_'.</p>"));
1243  _rnxV3CheckBox->setWhatsThis(tr("<p>The default format for RINEX Observation files is RINEX Version 2.</p><p>Select 'Version 3' if you want to save observations in RINEX Version 3 format.</p>"));
1244
1245  // WhatsThis, RINEX Ephemeris
1246  // --------------------------
1247  _ephPathLineEdit->setWhatsThis(tr("<p>Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files.</p><p>If the specified directory does not exist, BNC will not create RINEX Navigation files.</p>"));
1248  _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1249  _ephOutPortLineEdit->setWhatsThis(tr("<p>BNC can produce ephemeris data in RINEX Navigation ASCII format on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1250  _ephV3CheckBox->setWhatsThis(tr("<p>The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.</p><p>Select 'Version 3' if you want to output ephemeris in RINEX Version 3 format.</p>"));
1251
1252  // WhatsThis, RINEX Editing & QC
1253  // -----------------------------
1254  _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX Version 2 or 3 files or to perform a Quality Check (QC) and 'Analyze' data following UNAVCO's famous 'teqc' program.</p>"));
1255  _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX Version 2 or 3 files.</p>"));
1256  _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to input observation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory.</p>"));
1257  _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to input navigation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory.</p>"));
1258  _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Observation output file.</p><p>Default is an empty option field, meaning that no RINEX Observation output file will be produced.</p>"));
1259  _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Navigation output file.</p><p>Default is an empty option field, meaning that no RINEX Navigation output file will be produced.</p>"));
1260  _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced.</p>"));
1261  _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information.</p>"));
1262  _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk.</p>"));
1263  _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for navigation systems must be separated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5 I:5&9'. Specifying an empty option string would be overruled by this default.</p>"));
1264
1265  // WhatsThis, SP3 Comparison
1266  // -------------------------
1267  _sp3CompFileChooser->setWhatsThis(tr("<p>BNC can compare two SP3 files containing GNSS satellite orbit and clock information.</p></p>Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma.</p>"));
1268  _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparison. Example:<p>G04,G31,R</p><p>This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparison.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison.</p>"));
1269  _sp3CompLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile saving comparison results.</p><p>Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless.</p>"));
1270
1271  // WhatsThis, Broadcast Corrections
1272  // --------------------------------
1273  _corrPathLineEdit->setWhatsThis(tr("<p>Specify a directory for saving Broadcast Ephemeris Correction files.</p><p>If the specified directory does not exist, BNC will not create the files.</p>"));
1274  _corrPortLineEdit->setWhatsThis(tr("<p>BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1275  _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of Broadcast Ephemeris Correction files.</p>"));
1276
1277  // WhatsThis, Feed Engine
1278  // ----------------------
1279  _outPortLineEdit->setWhatsThis(tr("<p>BNC can produce synchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1280  _outWaitSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds.</p><p>A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or product.</p>"));
1281  _outSamplSpinBox->setWhatsThis(tr("<p>Select a synchronized observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1282  _outFileLineEdit->setWhatsThis(tr("<p>Specify the full path to a file where synchronized observations are saved in plain ASCII format.</p><p>Beware that the size of this file can rapidly increase depending on the number of incoming streams.</p>"));
1283  _outUPortLineEdit->setWhatsThis(tr("<p>BNC can produce unsynchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1284
1285  // WhatsThis, Serial Output
1286  // ------------------------
1287  _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream content, the receiver may use it for example for Differential GNSS, Precise Point Positioning or any other purpose supported by its firmware.</p>"));
1288  _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows:       COM1, COM2<br>Linux:         /dev/ttyS0, /dev/ttyS1<br>FreeBSD:       /dev/ttyd0, /dev/ttyd1<br>Digital Unix:  /dev/tty01, /dev/tty02<br>HP-UX:         /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX:      /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that before you start BNC, you must plug a serial cable in the port defined here.</p>"));
1289  _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Using a high baud rate is recommended.</p>"));
1290  _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1291  _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1292  _serialParityComboBox->setWhatsThis(tr("<p>Select a 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. The parity is often set to 'NONE'.</p>"));
1293  _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1294  _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtual Reference Station' (VRS) concept which requires the receiver to send approximate position information to the Ntrip Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the Ntrip Broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GGA from your serial connected receiver to the Ntrip Broadcaster and/or save them in a file.</p><p>Select 'Manual GPGGA' or 'Manual GNGGA' if you want BNC to produce and upload GPGGA or GNGGA NMEA messages to the Ntrip Broadcaster because your serial connected receiver doesn't generate these messages. A Talker ID 'GP' preceding the GGA string stands for GPS solutions while a Talker ID 'GN' stands for multi constellation solutions.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'nmea' stream attribute set to 'yes'. This attribute is either extracted from the Ntrip Broadcaster's source-table or introduced by the user via editing the BNC configuration file.</p>"));
1295  _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk.</p>"));
1296  _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced by option 'Mountpoint'. Together with the latitude and longitude from the source-table, the height information is used to build GGA messages to be sent to the Ntrip Broadcaster.</p><p>For adjusting latitude and longitude values of a VRS stream given in the 'Streams' canvas, you can double click the latitude/longitude data fields, specify appropriate values and then hit Enter.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual GPGGA' or 'Manual GNGGA' respectively.</p>"));
1297  _serialManualNMEASamplingSpinBox->setWhatsThis(tr("<p>Select a sampling interval in seconds for manual generation and upload of NMEA GGA sentences.</p><p>A sampling rate of '0' means, the a GGA sentence will be send only once to initialize the requested VRS stream. Note that some VRS systems need GGA sentences at regular intervals.</p>"));
1298
1299  // WhatsThis, Outages
1300  // ------------------
1301  _adviseObsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>Default is an empty option field, meaning that you don't want BNC to report on stream failures or recoveries when exceeding a threshold time span.</p>"));
1302  _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1303  _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1304  _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and a comment 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider.</p><p>An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1305
1306  // WhatsThis, Miscellaneous
1307  // ------------------------
1308  _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1309  _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1310  _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1311  _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function.</p>"));
1312
1313  // WhatsThis, PPP (1)
1314  // ------------------
1315  _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull a RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from Ntrip Broadcaster <u>products.igs-ip.net</u>.<br></li><li>Post processing PPP requires RINEX Observation files, RINEX Navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations.</p>"));
1316  _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX Observation file.</p>"));
1317  _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX Navigation file.</p>"));
1318  _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p><p>If you don't specify a corrections stream via this option, BNC will fall back to Single Point Positioning (SPP, positioning from observations and Broadcast Ephemeris only) instead of doing PPP.</p>"));
1319  _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP.</p>"));
1320  _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations.</p>"));
1321  _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:<p><ul><li>Specify the station either by<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode), or</li><li>the 4-charater station ID of the RINEX Observations file (when in post processing PPP mode).</li></ul></li><li>Approximate X,Y,Z coordinate of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>North, East and Up component of antenna eccentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li><li>Receiver type following the naming conventions for IGS equipment.</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.</p>"));
1322  _pppWidgets._v3filenames->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames for PPP logfiles, NMEA files and SINEX Troposphere files following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard. The file content is not affected by this option. It only concerns the filenames.</p>"));
1323  _pppWidgets._logPath->setWhatsThis(tr("<p>Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no PPP logfiles shall be produced.</p>"));
1324  _pppWidgets._nmeaPath->setWhatsThis(tr("<p>Specify a directory for saving coordinates in daily NMEA files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no NMEA file shall be produced.</p>"));
1325  _pppWidgets._snxtroPath->setWhatsThis(tr("<p>Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no SINEX Troposphere files shall be produced.</p>"));
1326  _pppWidgets._snxtroIntr->setWhatsThis(tr("<p>Select a length for SINEX Troposphere files.</p><p>Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'.</p>"));
1327  _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere parameters.</p><p>Default 'SNX TRO sampling' rate is '0', meaning that all troposphere estimates will be saved on disk.</p>"));
1328  _pppWidgets._snxtroAc->setWhatsThis(tr("<p>Specify a 3-character abbreviation describing you as the generating Analysis Center (AC) in your SINEX troposphere files.</p>"));
1329  _pppWidgets._snxtroSol->setWhatsThis(tr("<p>Specify a 4-character solution ID to allow a distingtion between different solutions per AC.</p>"));
1330
1331  // WhatsThis, PPP (3)
1332  // ------------------
1333  _pppWidgets._lcGPS->setWhatsThis(tr("<p>Specify which kind of GPS observations you want to use and on which kind of ionosphere-free linear combination of GPS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Note that most geodetic receivers support the observation of GPS code and phase data. Hence specifying 'P3&L3' would be a good choice when processing data from such a receiver.</p><p>Specifying 'no' means that you don't want BNC to use GPS data.</p>"));
1334  _pppWidgets._lcGLONASS->setWhatsThis(tr("<p>Specify which kind of GLONASS observations you want to use and on which kind of ionosphere-free linear combination of GLONASS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying 'no' means that you don't want BNC to use GLONASS data.</p>"));
1335  _pppWidgets._lcGalileo->setWhatsThis(tr("<p>Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if Galileo data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want BNC to use Galileo data.</p>"));
1336  _pppWidgets._lcBDS->setWhatsThis(tr("<p>Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if BDS data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want to use BDS data.</p>"));
1337  _pppWidgets._sigmaC1->setWhatsThis(tr("<p>Enter a Sigma for GNSS C1 code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of C1 code observations to a PPP solution from combined code and phase data. 2.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma C1 = 2.0'</p>"));
1338  _pppWidgets._sigmaL1->setWhatsThis(tr("<p>Enter a Sigma for GNSS L1 phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma L1 = 0.01'</p>"));
1339  _pppWidgets._maxResC1->setWhatsThis(tr("<p>Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex C1 = 3.0'</p>"));
1340  _pppWidgets._maxResL1->setWhatsThis(tr("<p>Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex L1 = 0.03'</p>"));
1341  _pppWidgets._eleWgtCode->setWhatsThis(tr("<p>Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution.</p>"));
1342  _pppWidgets._eleWgtPhase->setWhatsThis(tr("<p>Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution.</p>"));
1343  _pppWidgets._minObs->setWhatsThis(tr("<p>Select a Minimum Number of Observations per epoch for a PPP solution.</p><p>BNC will only process epochs with observation numbers reaching or exceeding this minimum.</p>"));
1344  _pppWidgets._minEle->setWhatsThis(tr("<p>Select a Minimum satellite Elevation for observations.</p><p>BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.</p><p>Selecting '10 deg' may be an appropriate choice in order to avoid too noisy observations.</p>"));
1345
1346  // WhatsThis, Combine Corrections
1347  // ------------------------------
1348  _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock correction streams in real-time to produce, encode, upload and save a combination of correctors coming from different providers. To add a line to the 'Combine Corrections' table hit the 'Add Row' button, double click on the 'Mountpoint' field to specify a Broadcast Ephemeris Correction mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter a weight to be applied for this stream in the combination.</p><p>Note that the orbit information in the resulting combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides orbit and clock correction streams BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris Correction stream in the 'Combine Corrections' table. Instead of combining corrections BNC will then add the corrections to the Broadcast Ephemeris with the possibility to save final orbit and clock results in SP3 and/or Clock RINEX format.</p>"));
1349  addCmbRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Combine Corrections' table.</p>"));
1350  delCmbRowButton->setWhatsThis(tr("<p>Hit 'Delete' button to delete the highlighted line(s) from the 'Combine Corrections' table.</p>"));
1351  _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'.</p><p>It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1352  _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1353  _cmbSamplSpinBox->setWhatsThis(tr("<p>Select a combination Sampling interval for the clocks. Clock corrections will be produced following that interval.</p><p>A value of 10 sec may be an appropriate choice.</p>"));
1354  _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination.</p>"));
1355
1356  // WhatsThis, Upload Corrections
1357  // -----------------------------
1358  _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS14) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table.</p>"));
1359  addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>"));
1360  delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the Upload Corrections' table.</p>"));
1361  _uploadIntrComboBox->setWhatsThis(tr("<p>Select the length of the SP3 and Clock RINEX files.</p>"));
1362  _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("<p>Select a stream's orbit correction sampling interval in seconds.</p><p>A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages.</p>"));
1363  _uploadSamplSp3SpinBox->setWhatsThis(tr("<p>Select a SP3 orbit file sampling interval in minutes.</p><p>A value of zero '0' tells BNC to store all available samples into SP3 orbit files.</p>"));
1364  _uploadSamplClkRnxSpinBox->setWhatsThis(tr("<p>Select a Clock RINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Clock RINEX files.</p>"));
1365  setUploadTrafoButton->setWhatsThis(tr("<p>Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation via option 'System'.</p>"));
1366  _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify an 'ANTEX file' path if you want to save the stream content in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file content as well as the orbit and clock correctors will be referred to satellite APCs.</p>"));
1367
1368  // WhatsThis, Upload Ephemeris
1369  // ---------------------------
1370  _uploadEphHostLineEdit->setWhatsThis(tr("<p>BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the IP number or URL of an Ntrip Broadcaster to upload the stream.</p><p>An empty option field means that you don't want to upload Broadcast Ephemeris.</p>"));
1371  _uploadEphPortLineEdit->setWhatsThis(tr("<p>Specify the IP port of the Ntrip Broadcaster to upload the Broadcast Ephemeris stream. Default is port 80.</p>"));
1372  _uploadEphMountpointLineEdit->setWhatsThis(tr("<p>Specify a mountpoint for uploading the Broadcast Ephemeris stream.</p>"));
1373  _uploadEphPasswordLineEdit->setWhatsThis(tr("<p>Specify the stream upload password protecting the mounpoint on the Ntrip Broadcaster.</p>"));
1374  _uploadEphSampleSpinBox->setWhatsThis(tr("<p>Select the Broadcast Ephemeris sampling interval in seconds.</p><p>Default is '5', meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds.</p>"));
1375  _uploadEphBytesCounter->setWhatsThis(tr("<p>BNC shows the amount of data uploaded via this stream.</p>"));
1376// weber
1377
1378  // WhatsThis, Streams Canvas
1379  // -------------------------
1380  _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1381  _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1382  _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1383  _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1384  _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1385  _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1386
1387  // WhatsThis, Log Canvas
1388  // ---------------------
1389  _log->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.</p>"));
1390  _bncFigure->setWhatsThis(tr("<p>The bandwidth consumption per stream is shown in the 'Throughput' tab in bits per second (bps) or kilobits per second (kbps).</p>"));
1391  _bncFigureLate->setWhatsThis(tr("<p>The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.</p><p>Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.</p>"));
1392  _bncFigurePPP->setWhatsThis(tr("<p>PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.</p><p>Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.</p>"));
1393
1394
1395  // Enable/Disable all Widgets
1396  // --------------------------
1397  slotBncTextChanged();
1398  enableStartStop();
1399
1400  // Auto start
1401  // ----------
1402  if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1403    slotStart();
1404  }
1405}
1406
1407// Destructor
1408////////////////////////////////////////////////////////////////////////////
1409bncWindow::~bncWindow() {
1410  if (_caster) {
1411    delete _caster; BNC_CORE->setCaster(0);
1412  }
1413  if (_casterEph) {
1414    delete _casterEph;
1415  }
1416  delete _bncFigureLate;
1417  delete _bncFigurePPP;
1418  delete _actHelp;
1419  delete _actAbout;
1420  delete _actFlowchart;
1421  delete _actFontSel;
1422  delete _actSaveOpt;
1423  delete _actQuit;
1424  delete _actAddMountPoints;
1425  delete _actDeleteMountPoints;
1426  delete _actMapMountPoints;
1427  delete _actStart;
1428  delete _actStop;
1429  delete _actwhatsthis;
1430  delete _proxyHostLineEdit;
1431  delete _proxyPortLineEdit;
1432  delete _sslCaCertPathLineEdit;
1433  delete _sslIgnoreErrorsCheckBox;
1434  delete _logFileLineEdit;
1435  delete _rawOutFileLineEdit;
1436  delete _rnxAppendCheckBox;
1437  delete _onTheFlyComboBox;
1438  delete _autoStartCheckBox;
1439  delete _rnxPathLineEdit;
1440  delete _rnxIntrComboBox;
1441  delete _rnxSamplSpinBox;
1442  delete _rnxFileCheckBox;
1443  delete _rnxSkelLineEdit;
1444  delete _rnxScrpLineEdit;
1445  delete _rnxV3CheckBox;
1446  delete _rnxV2Priority;
1447  delete _ephPathLineEdit;
1448  delete _ephIntrComboBox;
1449  delete _ephOutPortLineEdit;
1450  delete _ephV3CheckBox;
1451  delete _corrPathLineEdit;
1452  delete _corrIntrComboBox;
1453  delete _corrPortLineEdit;
1454  delete _outPortLineEdit;
1455  delete _outWaitSpinBox;
1456  delete _outSamplSpinBox;
1457  delete _outFileLineEdit;
1458  delete _outUPortLineEdit;
1459  delete _serialMountPointLineEdit;
1460  delete _serialPortNameLineEdit;
1461  delete _serialBaudRateComboBox;
1462  delete _serialFlowControlComboBox;
1463  delete _serialDataBitsComboBox;
1464  delete _serialParityComboBox;
1465  delete _serialStopBitsComboBox;
1466  delete _serialAutoNMEAComboBox;
1467  delete _serialFileNMEALineEdit;
1468  delete _serialHeightNMEALineEdit;
1469  delete _serialManualNMEASamplingSpinBox;
1470  delete _adviseObsRateComboBox;
1471  delete _adviseFailSpinBox;
1472  delete _adviseRecoSpinBox;
1473  delete _adviseScriptLineEdit;
1474  delete _miscMountLineEdit;
1475  delete _miscPortLineEdit;
1476  delete _miscIntrComboBox;
1477  delete _miscScanRTCMCheckBox;
1478  _mountPointsTable->deleteLater();
1479  delete _log;
1480  _cmbTable->deleteLater();
1481  delete _cmbMaxresLineEdit;
1482  delete _cmbUseGlonass;
1483  delete _cmbSamplSpinBox;
1484  delete _cmbMethodComboBox;
1485  _uploadTable->deleteLater();
1486  delete _uploadIntrComboBox;
1487  delete _uploadAntexFile;
1488  delete _uploadSamplRtcmEphCorrSpinBox;
1489  delete _uploadSamplSp3SpinBox;
1490  delete _uploadSamplClkRnxSpinBox;
1491  delete _uploadEphHostLineEdit;
1492  delete _uploadEphPortLineEdit;
1493  delete _uploadEphPasswordLineEdit;
1494  delete _uploadEphMountpointLineEdit;
1495  delete _uploadEphSampleSpinBox;
1496  delete _uploadEphBytesCounter;
1497  delete _loggroup;
1498  delete _reqcActionComboBox;
1499  delete _reqcObsFileChooser;
1500  delete _reqcNavFileChooser;
1501  delete _reqcOutObsLineEdit;
1502  delete _reqcOutNavLineEdit;
1503  delete _reqcOutLogLineEdit;
1504  delete _reqcPlotDirLineEdit;
1505  delete _reqcSkyPlotSignals;
1506  delete _reqcLogSummaryOnly;
1507  delete _reqcEditOptionButton;
1508  delete _sp3CompFileChooser;
1509  delete _sp3CompExclude;
1510  delete _sp3CompLogLineEdit;
1511  //delete _canvas;
1512}
1513
1514//
1515////////////////////////////////////////////////////////////////////////////
1516void bncWindow::populateMountPointsTable() {
1517
1518  for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1519    _mountPointsTable->removeRow(iRow);
1520  }
1521
1522  bncSettings settings;
1523
1524  QListIterator<QString> it(settings.value("mountPoints").toStringList());
1525  int iRow = 0;
1526  while (it.hasNext()) {
1527    QStringList hlp = it.next().split(" ");
1528    if (hlp.size() < 7) continue;
1529    _mountPointsTable->insertRow(iRow);
1530
1531    QUrl    url(hlp[0]);
1532
1533    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1534    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1535    QString nmea(hlp[5]);
1536    if (hlp[6] == "S") {
1537      fullPath = hlp[0].replace(0,2,"");
1538    }
1539    QString ntripVersion = "2";
1540    if (hlp.size() >= 7) {
1541      ntripVersion = (hlp[6]);
1542    }
1543
1544    QTableWidgetItem* it;
1545    it = new QTableWidgetItem(url.userInfo());
1546    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1547    _mountPointsTable->setItem(iRow, 0, it);
1548
1549    it = new QTableWidgetItem(fullPath);
1550    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1551    _mountPointsTable->setItem(iRow, 1, it);
1552
1553    it = new QTableWidgetItem(format);
1554    _mountPointsTable->setItem(iRow, 2, it);
1555
1556    it = new QTableWidgetItem(country);
1557    _mountPointsTable->setItem(iRow, 3, it);
1558
1559    if      (nmea == "yes") {
1560      it = new QTableWidgetItem(latitude);
1561      _mountPointsTable->setItem(iRow, 4, it);
1562      it = new QTableWidgetItem(longitude);
1563      _mountPointsTable->setItem(iRow, 5, it);
1564    } else {
1565      it = new QTableWidgetItem(latitude);
1566      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1567      _mountPointsTable->setItem(iRow, 4, it);
1568
1569      it = new QTableWidgetItem(longitude);
1570      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1571      _mountPointsTable->setItem(iRow, 5, it);
1572    }
1573
1574    it = new QTableWidgetItem(nmea);
1575    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1576    _mountPointsTable->setItem(iRow, 6, it);
1577
1578    it = new QTableWidgetItem(ntripVersion);
1579    ////    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1580    _mountPointsTable->setItem(iRow, 7, it);
1581
1582    bncTableItem* bncIt = new bncTableItem();
1583    bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1584    _mountPointsTable->setItem(iRow, 8, bncIt);
1585
1586    iRow++;
1587  }
1588
1589  _mountPointsTable->sortItems(1);
1590
1591  enableStartStop();
1592}
1593
1594// Retrieve Table
1595////////////////////////////////////////////////////////////////////////////
1596void bncWindow::slotAddMountPoints() {
1597
1598  bncSettings settings;
1599  QString proxyHost = settings.value("proxyHost").toString();
1600  int     proxyPort = settings.value("proxyPort").toInt();
1601  if (proxyHost != _proxyHostLineEdit->text()         ||
1602      proxyPort != _proxyPortLineEdit->text().toInt()) {
1603    int iRet = QMessageBox::question(this, "Question", "Proxy options "
1604                                     "changed. Use the new ones?",
1605                                     QMessageBox::Yes, QMessageBox::No,
1606                                     QMessageBox::NoButton);
1607    if      (iRet == QMessageBox::Yes) {
1608      settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1609      settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1610    }
1611  }
1612
1613  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1614  settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1615
1616  QMessageBox msgBox;
1617  msgBox.setIcon(QMessageBox::Question);
1618  msgBox.setWindowTitle("Add Stream");
1619  msgBox.setText("Add stream(s) coming from:");
1620
1621  QPushButton* buttonNtrip  = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1622  QPushButton* buttonIP     = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1623  QPushButton* buttonUDP    = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1624  QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1625  QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1626
1627  msgBox.exec();
1628
1629  if (msgBox.clickedButton() == buttonNtrip) {
1630    bncTableDlg* dlg = new bncTableDlg(this);
1631    dlg->move(this->pos().x()+50, this->pos().y()+50);
1632    connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1633          this, SLOT(slotNewMountPoints(QStringList*)));
1634    dlg->exec();
1635    delete dlg;
1636  } else if (msgBox.clickedButton() == buttonIP) {
1637    bncIpPort* ipp = new bncIpPort(this);
1638    connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1639          this, SLOT(slotNewMountPoints(QStringList*)));
1640    ipp->exec();
1641    delete ipp;
1642  } else if (msgBox.clickedButton() == buttonUDP) {
1643    bncUdpPort* udp = new bncUdpPort(this);
1644    connect(udp, SIGNAL(newMountPoints(QStringList*)),
1645          this, SLOT(slotNewMountPoints(QStringList*)));
1646    udp->exec();
1647    delete udp;
1648  } else if (msgBox.clickedButton() == buttonSerial) {
1649    bncSerialPort* sep = new bncSerialPort(this);
1650    connect(sep, SIGNAL(newMountPoints(QStringList*)),
1651          this, SLOT(slotNewMountPoints(QStringList*)));
1652    sep->exec();
1653    delete sep;
1654  } else if (msgBox.clickedButton() == buttonCancel) {
1655    // Cancel
1656  }
1657
1658  enableStartStop();
1659}
1660
1661// Delete Selected Mount Points
1662////////////////////////////////////////////////////////////////////////////
1663void bncWindow::slotDeleteMountPoints() {
1664
1665  int nRows = _mountPointsTable->rowCount();
1666  bool flg[nRows];
1667  for (int iRow = 0; iRow < nRows; iRow++) {
1668    if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1669      flg[iRow] = true;
1670    }
1671    else {
1672      flg[iRow] = false;
1673    }
1674  }
1675  for (int iRow = nRows-1; iRow >= 0; iRow--) {
1676    if (flg[iRow]) {
1677      _mountPointsTable->removeRow(iRow);
1678    }
1679  }
1680  _actDeleteMountPoints->setEnabled(false);
1681
1682  enableStartStop();
1683}
1684
1685// New Mount Points Selected
1686////////////////////////////////////////////////////////////////////////////
1687void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1688  int iRow = 0;
1689  QListIterator<QString> it(*mountPoints);
1690  while (it.hasNext()) {
1691    QStringList hlp = it.next().split(" ");
1692    QUrl    url(hlp[0]);
1693    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1694    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1695    QString nmea(hlp[5]);
1696    if (hlp[6] == "S") {
1697      fullPath = hlp[0].replace(0,2,"");
1698    }
1699    QString ntripVersion = "2";
1700    if (hlp.size() >= 7) {
1701      ntripVersion = (hlp[6]);
1702    }
1703
1704    _mountPointsTable->insertRow(iRow);
1705
1706    QTableWidgetItem* it;
1707    it = new QTableWidgetItem(url.userInfo());
1708    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1709    _mountPointsTable->setItem(iRow, 0, it);
1710
1711    it = new QTableWidgetItem(fullPath);
1712    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1713    _mountPointsTable->setItem(iRow, 1, it);
1714
1715    it = new QTableWidgetItem(format);
1716    _mountPointsTable->setItem(iRow, 2, it);
1717
1718    it = new QTableWidgetItem(country);
1719    _mountPointsTable->setItem(iRow, 3, it);
1720
1721    if      (nmea == "yes") {
1722    it = new QTableWidgetItem(latitude);
1723    _mountPointsTable->setItem(iRow, 4, it);
1724    it = new QTableWidgetItem(longitude);
1725    _mountPointsTable->setItem(iRow, 5, it);
1726    } else {
1727    it = new QTableWidgetItem(latitude);
1728    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1729    _mountPointsTable->setItem(iRow, 4, it);
1730    it = new QTableWidgetItem(longitude);
1731    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1732    _mountPointsTable->setItem(iRow, 5, it);
1733    }
1734
1735    it = new QTableWidgetItem(nmea);
1736    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1737    _mountPointsTable->setItem(iRow, 6, it);
1738
1739    it = new QTableWidgetItem(ntripVersion);
1740    ////it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1741    _mountPointsTable->setItem(iRow, 7, it);
1742
1743    bncTableItem* bncIt = new bncTableItem();
1744    _mountPointsTable->setItem(iRow, 8, bncIt);
1745
1746    iRow++;
1747  }
1748  _mountPointsTable->hideColumn(0);
1749  _mountPointsTable->hideColumn(3);
1750  _mountPointsTable->sortItems(1);
1751  delete mountPoints;
1752
1753  enableStartStop();
1754}
1755
1756// Save Options (serialize)
1757////////////////////////////////////////////////////////////////////////////
1758void bncWindow::slotSaveOptions() {
1759  saveOptions();
1760  bncSettings settings;
1761  settings.sync();
1762}
1763
1764// Save Options (memory only)
1765////////////////////////////////////////////////////////////////////////////
1766void bncWindow::saveOptions() {
1767
1768  QStringList mountPoints;
1769  for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1770
1771    if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1772      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1773                "@"  + _mountPointsTable->item(iRow, 1)->text() );
1774
1775      mountPoints.append(url.toString() + " " +
1776                         _mountPointsTable->item(iRow, 2)->text()
1777                 + " " + _mountPointsTable->item(iRow, 3)->text()
1778                 + " " + _mountPointsTable->item(iRow, 4)->text()
1779                 + " " + _mountPointsTable->item(iRow, 5)->text()
1780                 + " " + _mountPointsTable->item(iRow, 6)->text()
1781                 + " " + _mountPointsTable->item(iRow, 7)->text());
1782    } else {
1783      mountPoints.append(
1784                  "//" + _mountPointsTable->item(iRow, 1)->text()
1785                 + " " + _mountPointsTable->item(iRow, 2)->text()
1786                 + " " + _mountPointsTable->item(iRow, 3)->text()
1787                 + " " + _mountPointsTable->item(iRow, 4)->text()
1788                 + " " + _mountPointsTable->item(iRow, 5)->text()
1789                 + " " + _mountPointsTable->item(iRow, 6)->text()
1790                 + " " + _mountPointsTable->item(iRow, 7)->text());
1791    }
1792  }
1793
1794  QStringList cmbStreams;
1795  for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1796    QString hlp;
1797    for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1798      if (_cmbTable->item(iRow, iCol)) {
1799        hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1800      }
1801    }
1802    if (!hlp.isEmpty()) {
1803      cmbStreams << hlp;
1804    }
1805  }
1806
1807  QStringList uploadMountpointsOut;
1808  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1809    QString hlp;
1810    for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1811      if (_uploadTable->cellWidget(iRow, iCol) &&
1812          (iCol == 3 || iCol == 4 || iCol == 5)) {
1813        if      (iCol == 3) {
1814          QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1815          hlp += passwd->text() + ",";
1816        }
1817        else if (iCol == 4) {
1818          QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1819          hlp += system->currentText() + ",";
1820        }
1821        else if (iCol == 5) {
1822          QCheckBox* com    = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1823          QString state; state.setNum(com->checkState());
1824          hlp +=  state + ",";
1825        }
1826      }
1827      else if (_uploadTable->item(iRow, iCol)) {
1828        hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1829      }
1830    }
1831    if (!hlp.isEmpty()) {
1832      uploadMountpointsOut << hlp;
1833    }
1834  }
1835
1836  bncSettings settings;
1837
1838  settings.setValue("startTab",    _aogroup->currentIndex());
1839  settings.setValue("statusTab",   _loggroup->currentIndex());
1840  settings.setValue("mountPoints", mountPoints);
1841// Network
1842  settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1843  settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1844  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1845  settings.setValue("sslIgnoreErrors",  _sslIgnoreErrorsCheckBox->checkState());
1846// General
1847  settings.setValue("logFile",     _logFileLineEdit->text());
1848  settings.setValue("rnxAppend",   _rnxAppendCheckBox->checkState());
1849  settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1850  settings.setValue("autoStart",   _autoStartCheckBox->checkState());
1851  settings.setValue("rawOutFile",  _rawOutFileLineEdit->text());
1852// RINEX Observations
1853  settings.setValue("rnxPath",     _rnxPathLineEdit->text());
1854  settings.setValue("rnxIntr",     _rnxIntrComboBox->currentText());
1855  settings.setValue("rnxSampl",    _rnxSamplSpinBox->value());
1856  settings.setValue("rnxSkel",     _rnxSkelLineEdit->text());
1857  settings.setValue("rnxOnlyWithSKL",_rnxFileCheckBox->checkState());
1858  settings.setValue("rnxScript",   _rnxScrpLineEdit->text());
1859  settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1860// RINEX Ephemeris
1861  settings.setValue("ephPath",       _ephPathLineEdit->text());
1862  settings.setValue("ephIntr",       _ephIntrComboBox->currentText());
1863  settings.setValue("ephOutPort",    _ephOutPortLineEdit->text());
1864// Broadcast Corrections
1865  settings.setValue("corrPath",    _corrPathLineEdit->text());
1866  settings.setValue("corrIntr",    _corrIntrComboBox->currentText());
1867  settings.setValue("corrPort",    _corrPortLineEdit->text());
1868// Feed Engine
1869  settings.setValue("outPort",     _outPortLineEdit->text());
1870  settings.setValue("outWait",     _outWaitSpinBox->value());
1871  settings.setValue("outSampl",    _outSamplSpinBox->value());
1872  settings.setValue("outFile",     _outFileLineEdit->text());
1873  settings.setValue("outUPort",    _outUPortLineEdit->text());
1874// Serial Output
1875  settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1876  settings.setValue("serialPortName",  _serialPortNameLineEdit->text());
1877  settings.setValue("serialBaudRate",  _serialBaudRateComboBox->currentText());
1878  settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1879  settings.setValue("serialDataBits",  _serialDataBitsComboBox->currentText());
1880  settings.setValue("serialParity",    _serialParityComboBox->currentText());
1881  settings.setValue("serialStopBits",  _serialStopBitsComboBox->currentText());
1882  settings.setValue("serialAutoNMEA",  _serialAutoNMEAComboBox->currentText());
1883  settings.setValue("serialFileNMEA",    _serialFileNMEALineEdit->text());
1884  settings.setValue("serialHeightNMEA",  _serialHeightNMEALineEdit->text());
1885  settings.setValue("serialManualNMEASampling", _serialManualNMEASamplingSpinBox->value());
1886// Outages
1887  settings.setValue("adviseObsRate", _adviseObsRateComboBox->currentText());
1888  settings.setValue("adviseFail",    _adviseFailSpinBox->value());
1889  settings.setValue("adviseReco",    _adviseRecoSpinBox->value());
1890  settings.setValue("adviseScript",  _adviseScriptLineEdit->text());
1891// Miscellaneous
1892  settings.setValue("miscMount",   _miscMountLineEdit->text());
1893  settings.setValue("miscPort",    _miscPortLineEdit->text());
1894  settings.setValue("miscIntr",    _miscIntrComboBox->currentText());
1895  settings.setValue("miscScanRTCM", _miscScanRTCMCheckBox->checkState());
1896// Reqc
1897  settings.setValue("reqcAction",     _reqcActionComboBox->currentText());
1898  settings.setValue("reqcObsFile",    _reqcObsFileChooser->fileName());
1899  settings.setValue("reqcNavFile",    _reqcNavFileChooser->fileName());
1900  settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1901  settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1902  settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1903  settings.setValue("reqcPlotDir",    _reqcPlotDirLineEdit->text());
1904  settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1905  settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
1906// SP3 Comparison
1907  settings.setValue("sp3CompFile",       _sp3CompFileChooser->fileName());
1908  settings.setValue("sp3CompExclude",    _sp3CompExclude->text());
1909  settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
1910// Combine Corrections
1911  if (!cmbStreams.isEmpty()) {
1912    settings.setValue("cmbStreams", cmbStreams);
1913  }
1914  else {
1915    settings.setValue("cmbStreams", "");
1916  }
1917  settings.setValue("cmbMethod",     _cmbMethodComboBox->currentText());
1918  settings.setValue("cmbMaxres",     _cmbMaxresLineEdit->text());
1919  settings.setValue("cmbSampl",      _cmbSamplSpinBox->value());
1920  settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
1921// Upload Corrections
1922  if (!uploadMountpointsOut.isEmpty()) {
1923    settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1924  }
1925  else {
1926    settings.setValue("uploadMountpointsOut", "");
1927  }
1928  settings.setValue("uploadIntr",             _uploadIntrComboBox->currentText());
1929  settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1930  settings.setValue("uploadSamplSp3",         _uploadSamplSp3SpinBox->value());
1931  settings.setValue("uploadSamplClkRnx",      _uploadSamplClkRnxSpinBox->value());
1932  settings.setValue("uploadAntexFile",        _uploadAntexFile->fileName());
1933// Upload Ephemeris
1934  settings.setValue("uploadEphHost",      _uploadEphHostLineEdit->text());
1935  settings.setValue("uploadEphPort",      _uploadEphPortLineEdit->text());
1936  settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1937  settings.setValue("uploadEphPassword",  _uploadEphPasswordLineEdit->text());
1938  settings.setValue("uploadEphSample",    _uploadEphSampleSpinBox->value());
1939
1940  if (_caster) {
1941    _caster->readMountPoints();
1942  }
1943
1944  _pppWidgets.saveOptions();
1945}
1946
1947// All get slots terminated
1948////////////////////////////////////////////////////////////////////////////
1949void bncWindow::slotGetThreadsFinished() {
1950  BNC_CORE->slotMessage("All Get Threads Terminated", true);
1951  delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
1952  delete _casterEph; _casterEph = 0;
1953  _runningRealTime = false;
1954}
1955
1956// Start It!
1957////////////////////////////////////////////////////////////////////////////
1958void bncWindow::slotStart() {
1959  saveOptions();
1960  if      ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
1961    _runningPPP = true;
1962    enableStartStop();
1963    _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
1964    BNC_CORE->startPPP();
1965    _bncFigurePPP->reset();
1966  }
1967  else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
1968    if (_reqcActionComboBox->currentText() == "Analyze") {
1969      _runningQC = true;
1970      t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
1971      connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1972      reqcAnalyze->start();
1973    }
1974    else {
1975      _runningEdit = true;
1976      t_reqcEdit* reqcEdit = new t_reqcEdit(this);
1977      connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1978      reqcEdit->start();
1979    }
1980    enableStartStop();
1981  }
1982  else if (!_sp3CompFileChooser->fileName().isEmpty()) {
1983    _runningSp3Comp = true;
1984    t_sp3Comp* sp3Comp = new t_sp3Comp(this);
1985    connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1986    sp3Comp->start();
1987    enableStartStop();
1988  }
1989  else {
1990    startRealTime();
1991    BNC_CORE->startPPP();
1992  }
1993}
1994
1995// Start Real-Time (Retrieve Data etc.)
1996////////////////////////////////////////////////////////////////////////////
1997void bncWindow::startRealTime() {
1998
1999  _runningRealTime = true;
2000
2001  _bncFigurePPP->reset();
2002
2003  _actDeleteMountPoints->setEnabled(false);
2004
2005  enableStartStop();
2006
2007  _caster = new bncCaster();
2008
2009  BNC_CORE->setCaster(_caster);
2010  BNC_CORE->setPortEph(_ephOutPortLineEdit->text().toInt());
2011  BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2012  BNC_CORE->initCombination();
2013
2014  connect(_caster, SIGNAL(getThreadsFinished()),
2015          this, SLOT(slotGetThreadsFinished()));
2016
2017  connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2018           this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2019
2020  BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION" ("BNC_OS") ==========", true);
2021
2022  bncSettings settings;
2023
2024  // Active panels
2025  // -------------
2026  if (!_rnxPathLineEdit->text().isEmpty())
2027      BNC_CORE->slotMessage("Panel 'RINEX Observations' active", true);
2028  if (!_ephPathLineEdit->text().isEmpty())
2029      BNC_CORE->slotMessage("Panel 'RINEX Ephemeris' active", true);
2030  if (!_corrPathLineEdit->text().isEmpty())
2031      BNC_CORE->slotMessage("Panel 'Broadcast Corrections' active", true);
2032  if (!_outPortLineEdit->text().isEmpty())
2033      BNC_CORE->slotMessage("Panel 'Feed Engine' active", true);
2034  if (!_serialMountPointLineEdit->text().isEmpty())
2035      BNC_CORE->slotMessage("Panel 'Serial Output' active", true);
2036  if (!_adviseObsRateComboBox->currentText().isEmpty())
2037      BNC_CORE->slotMessage("Panel 'Outages' active", true);
2038  if (!_miscMountLineEdit->text().isEmpty())
2039      BNC_CORE->slotMessage("Panel 'Miscellaneous' active", true);
2040  if (_pppWidgets._dataSource->currentText() == "Real-Time Streams")
2041      BNC_CORE->slotMessage("Panel 'PPP' active", true);
2042  if (_cmbTable->rowCount() > 0)
2043      BNC_CORE->slotMessage("Panel 'Combine Corrections' active", true);
2044  if (_uploadTable->rowCount() > 0)
2045      BNC_CORE->slotMessage("Panel 'Upload Corrections' active", true);
2046  if (!_uploadEphHostLineEdit->text().isEmpty())
2047      BNC_CORE->slotMessage("Panel 'UploadEphemeris' active", true);
2048
2049  QDir rnxdir(settings.value("rnxPath").toString());
2050  if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2051
2052  QString rnx_file = settings.value("rnxScript").toString();
2053  if ( !rnx_file.isEmpty() ) {
2054    QFile rnxfile(settings.value("rnxScript").toString());
2055    if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2056  }
2057
2058  QDir ephdir(settings.value("ephPath").toString());
2059  if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2060
2061  QDir corrdir(settings.value("corrPath").toString());
2062  if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2063
2064  QString advise_file = settings.value("adviseScript").toString();
2065  if ( !advise_file.isEmpty() ) {
2066    QFile advisefile(settings.value("adviseScript").toString());
2067    if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2068  }
2069
2070  _caster->readMountPoints();
2071
2072  _casterEph = new bncEphUploadCaster();
2073  connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2074          _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2075}
2076
2077// Retrieve Data
2078////////////////////////////////////////////////////////////////////////////
2079void bncWindow::slotStop() {
2080  int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
2081                                   QMessageBox::Yes, QMessageBox::No,
2082                                   QMessageBox::NoButton);
2083  if (iRet == QMessageBox::Yes) {
2084    BNC_CORE->stopPPP();
2085    BNC_CORE->stopCombination();
2086    delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
2087    delete _casterEph; _casterEph = 0;
2088    _runningRealTime = false;
2089    _runningPPP      = false;
2090    enableStartStop();
2091  }
2092}
2093
2094// Close Application gracefully
2095////////////////////////////////////////////////////////////////////////////
2096void bncWindow::closeEvent(QCloseEvent* event) {
2097
2098  int iRet = QMessageBox::question(this, "Close", "Save Options?",
2099                                   QMessageBox::Yes, QMessageBox::No,
2100                                   QMessageBox::Cancel);
2101
2102  if      (iRet == QMessageBox::Cancel) {
2103    event->ignore();
2104    return;
2105  }
2106  else if (iRet == QMessageBox::Yes) {
2107    slotSaveOptions();
2108  }
2109
2110  BNC_CORE->stopPPP();
2111
2112  QMainWindow::closeEvent(event);
2113}
2114
2115// User changed the selection of mountPoints
2116////////////////////////////////////////////////////////////////////////////
2117void bncWindow::slotSelectionChanged() {
2118  if (_mountPointsTable->selectedItems().isEmpty()) {
2119    _actDeleteMountPoints->setEnabled(false);
2120  }
2121  else {
2122    _actDeleteMountPoints->setEnabled(true);
2123  }
2124}
2125
2126// Display Program Messages
2127////////////////////////////////////////////////////////////////////////////
2128void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2129  if (showOnScreen ) {
2130    _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
2131  }
2132}
2133
2134// About Message
2135////////////////////////////////////////////////////////////////////////////
2136void bncWindow::slotAbout() {
2137 new bncAboutDlg(0);
2138}
2139
2140//Flowchart
2141////////////////////////////////////////////////////////////////////////////
2142void bncWindow::slotFlowchart() {
2143 new bncFlowchartDlg(0);
2144}
2145
2146// Help Window
2147////////////////////////////////////////////////////////////////////////////
2148void bncWindow::slotHelp() {
2149  QUrl url;
2150  url.setPath(":bnchelp.html");
2151  new bncHlpDlg(0, url);
2152}
2153
2154// Select Fonts
2155////////////////////////////////////////////////////////////////////////////
2156void bncWindow::slotFontSel() {
2157  bool ok;
2158  QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2159  if (ok) {
2160    bncSettings settings;
2161    settings.setValue("font", newFont.toString());
2162    QApplication::setFont(newFont);
2163    int ww = QFontMetrics(newFont).width('w');
2164    setMinimumSize(60*ww, 80*ww);
2165    resize(60*ww, 80*ww);
2166  }
2167}
2168
2169// Whats This Help
2170void bncWindow::slotWhatsThis() {
2171  QWhatsThis::enterWhatsThisMode();
2172}
2173
2174//
2175////////////////////////////////////////////////////////////////////////////
2176void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2177  _threads = threads;
2178
2179  _bncFigure->updateMountPoints();
2180  _bncFigureLate->updateMountPoints();
2181
2182  populateMountPointsTable();
2183  bncSettings settings;
2184  _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
2185  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
2186  QListIterator<bncGetThread*> iTh(threads);
2187  while (iTh.hasNext()) {
2188    bncGetThread* thread = iTh.next();
2189    for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2190      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2191                "@"  + _mountPointsTable->item(iRow, 1)->text() );
2192      if (url                                      == thread->mountPoint() &&
2193          _mountPointsTable->item(iRow, 4)->text() == thread->latitude()   &&
2194          _mountPointsTable->item(iRow, 5)->text() == thread->longitude() ) {
2195        ((bncTableItem*) _mountPointsTable->item(iRow, 8))->setGetThread(thread);
2196        disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2197                  _bncFigure, SLOT(slotNewData(QByteArray, double)));
2198        connect(thread, SIGNAL(newBytes(QByteArray, double)),
2199                _bncFigure, SLOT(slotNewData(QByteArray, double)));
2200        disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2201                   _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2202        connect(thread, SIGNAL(newLatency(QByteArray, double)),
2203                _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2204        break;
2205      }
2206    }
2207  }
2208}
2209
2210//
2211////////////////////////////////////////////////////////////////////////////
2212void bncWindow::CreateMenu() {
2213  // Create Menus
2214  // ------------
2215  _menuFile = menuBar()->addMenu(tr("&File"));
2216  _menuFile->addAction(_actFontSel);
2217  _menuFile->addSeparator();
2218  _menuFile->addAction(_actSaveOpt);
2219  _menuFile->addSeparator();
2220  _menuFile->addAction(_actQuit);
2221
2222  _menuHlp = menuBar()->addMenu(tr("&Help"));
2223  _menuHlp->addAction(_actHelp);
2224  _menuHlp->addAction(_actFlowchart);
2225  _menuHlp->addAction(_actAbout);
2226}
2227
2228// Toolbar
2229////////////////////////////////////////////////////////////////////////////
2230void bncWindow::AddToolbar() {
2231  QToolBar* toolBar = new QToolBar;
2232  addToolBar(Qt::BottomToolBarArea, toolBar);
2233  toolBar->setMovable(false);
2234  toolBar->addAction(_actAddMountPoints);
2235  toolBar->addAction(_actDeleteMountPoints);
2236  toolBar->addAction(_actMapMountPoints);
2237  toolBar->addAction(_actStart);
2238  toolBar->addAction(_actStop);
2239  toolBar->addWidget(new QLabel("                                           "));
2240  toolBar->addAction(_actwhatsthis);
2241}
2242
2243// About
2244////////////////////////////////////////////////////////////////////////////
2245bncAboutDlg::bncAboutDlg(QWidget* parent) :
2246   QDialog(parent) {
2247
2248  QTextBrowser* tb = new QTextBrowser;
2249  QUrl url; url.setPath(":bncabout.html");
2250  tb->setSource(url);
2251  tb->setReadOnly(true);
2252
2253  int ww = QFontMetrics(font()).width('w');
2254  QPushButton* _closeButton = new QPushButton("Close");
2255  _closeButton->setMaximumWidth(10*ww);
2256  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2257
2258  QGridLayout* dlgLayout = new QGridLayout();
2259  QLabel* img = new QLabel();
2260  img->setPixmap(QPixmap(":ntrip-logo.png"));
2261  dlgLayout->addWidget(img, 0,0);
2262  dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2263  dlgLayout->addWidget(tb,1,0,1,2);
2264  dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2265
2266  setLayout(dlgLayout);
2267  resize(60*ww, 60*ww);
2268  setWindowTitle("About BNC");
2269  show();
2270}
2271
2272//
2273////////////////////////////////////////////////////////////////////////////
2274bncAboutDlg::~bncAboutDlg() {
2275
2276};
2277
2278// Flowchart
2279////////////////////////////////////////////////////////////////////////////
2280bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2281   QDialog(parent) {
2282
2283  int ww = QFontMetrics(font()).width('w');
2284  QPushButton* _closeButton = new QPushButton("Close");
2285  _closeButton->setMaximumWidth(10*ww);
2286  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2287
2288  QGridLayout* dlgLayout = new QGridLayout();
2289  QLabel* img = new QLabel();
2290  img->setPixmap(QPixmap(":bncflowchart.png"));
2291  dlgLayout->addWidget(img, 0,0);
2292  dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2293
2294  setLayout(dlgLayout);
2295  setWindowTitle("Flow Chart");
2296  show();
2297}
2298
2299//
2300////////////////////////////////////////////////////////////////////////////
2301bncFlowchartDlg::~bncFlowchartDlg() {
2302};
2303
2304// Enable/Disable Widget (and change its color)
2305////////////////////////////////////////////////////////////////////////////
2306void bncWindow::enableWidget(bool enable, QWidget* widget) {
2307
2308  const static QPalette paletteWhite(QColor(255, 255, 255));
2309  const static QPalette paletteGray(QColor(230, 230, 230));
2310
2311  widget->setEnabled(enable);
2312  if (enable) {
2313    widget->setPalette(paletteWhite);
2314  }
2315  else {
2316    widget->setPalette(paletteGray);
2317  }
2318}
2319
2320//  Bnc Text
2321////////////////////////////////////////////////////////////////////////////
2322void bncWindow::slotBncTextChanged(){
2323
2324  const static QPalette paletteWhite(QColor(255, 255, 255));
2325  const static QPalette paletteGray(QColor(230, 230, 230));
2326
2327  bool enable = true;
2328
2329  // Proxy
2330  //------
2331  if (sender() == 0 || sender() == _proxyHostLineEdit) {
2332    enable = !_proxyHostLineEdit->text().isEmpty();
2333    enableWidget(enable, _proxyPortLineEdit);
2334  }
2335
2336  // RINEX Observations
2337  // ------------------
2338  if (sender() == 0 || sender() == _rnxPathLineEdit) {
2339    enable = !_rnxPathLineEdit->text().isEmpty();
2340    enableWidget(enable, _rnxIntrComboBox);
2341    enableWidget(enable, _rnxSamplSpinBox);
2342    enableWidget(enable, _rnxSkelLineEdit);
2343    enableWidget(enable, _rnxFileCheckBox);
2344    enableWidget(enable, _rnxScrpLineEdit);
2345    enableWidget(enable, _rnxV2Priority);
2346    enableWidget(enable, _rnxV3CheckBox);
2347
2348    bool enable1 = true;
2349    enable1 = _rnxV3CheckBox->isChecked();
2350    if (enable && enable1) {
2351    enableWidget(false, _rnxV2Priority);
2352    }
2353    if (enable && !enable1) {
2354    enableWidget(true, _rnxV2Priority);
2355    }
2356  }
2357
2358  // RINEX Observations, Signal Priority
2359  // -----------------------------------
2360  if (sender() == 0 || sender() == _rnxV3CheckBox) {
2361    if (!_rnxPathLineEdit->text().isEmpty()) {
2362      enableWidget(enable, _rnxIntrComboBox);
2363      enable = !_rnxV3CheckBox->isChecked();
2364      enableWidget(enable, _rnxV2Priority);
2365    }
2366  }
2367
2368  // RINEX Ephemeris
2369  // ---------------
2370  if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _ephOutPortLineEdit) {
2371    enable = !_ephPathLineEdit->text().isEmpty() || !_ephOutPortLineEdit->text().isEmpty();
2372    enableWidget(enable, _ephIntrComboBox);
2373    enableWidget(enable, _ephV3CheckBox);
2374  }
2375
2376  // Broadcast Corrections
2377  // ---------------------
2378  if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2379    enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2380    enableWidget(enable, _corrIntrComboBox);
2381  }
2382
2383  // Feed Engine
2384  // -----------
2385  if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2386    enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2387    enableWidget(enable, _outWaitSpinBox);
2388    enableWidget(enable, _outSamplSpinBox);
2389  }
2390
2391  // Serial Output
2392  // -------------
2393  if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2394      sender() == _serialAutoNMEAComboBox) {
2395    enable = !_serialMountPointLineEdit->text().isEmpty();
2396    enableWidget(enable, _serialPortNameLineEdit);
2397    enableWidget(enable, _serialBaudRateComboBox);
2398    enableWidget(enable, _serialParityComboBox);
2399    enableWidget(enable, _serialDataBitsComboBox);
2400    enableWidget(enable, _serialStopBitsComboBox);
2401    enableWidget(enable, _serialFlowControlComboBox);
2402    enableWidget(enable, _serialAutoNMEAComboBox);
2403    bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2404    enableWidget(enable2, _serialFileNMEALineEdit);
2405    bool enable3 = enable && _serialAutoNMEAComboBox->currentText().contains("Manual");
2406    enableWidget(enable3, _serialHeightNMEALineEdit);
2407    enableWidget(enable3, _serialManualNMEASamplingSpinBox);
2408  }
2409
2410  // Outages
2411  // -------
2412  if (sender() == 0 || sender() == _adviseObsRateComboBox) {
2413    enable = !_adviseObsRateComboBox->currentText().isEmpty();
2414    enableWidget(enable, _adviseFailSpinBox);
2415    enableWidget(enable, _adviseRecoSpinBox);
2416    enableWidget(enable, _adviseScriptLineEdit);
2417  }
2418
2419  // Miscellaneous
2420  // -------------
2421  if (sender() == 0 || sender() == _miscMountLineEdit) {
2422    enable = !_miscMountLineEdit->text().isEmpty();
2423    enableWidget(enable, _miscIntrComboBox);
2424    enableWidget(enable, _miscScanRTCMCheckBox);
2425    enableWidget(enable, _miscPortLineEdit);
2426  }
2427
2428  // Enable/disable Broadcast Ephemerides
2429  // ------------------------------------
2430  if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2431    enable = !_uploadEphHostLineEdit->text().isEmpty();
2432    enableWidget(enable, _uploadEphPortLineEdit);
2433    enableWidget(enable, _uploadEphMountpointLineEdit);
2434    enableWidget(enable, _uploadEphPasswordLineEdit);
2435    enableWidget(enable, _uploadEphSampleSpinBox);
2436  }
2437
2438  // Combine Corrections
2439  // -------------------
2440  if (sender() == 0 || sender() == _cmbTable) {
2441    int iRow = _cmbTable->rowCount();
2442    if (iRow > 0) {
2443      enableWidget(true, _cmbMethodComboBox);
2444      enableWidget(true, _cmbMaxresLineEdit);
2445      enableWidget(true, _cmbSamplSpinBox);
2446      enableWidget(true, _cmbUseGlonass);
2447    }
2448    else {
2449      enableWidget(false, _cmbMethodComboBox);
2450      enableWidget(false, _cmbMaxresLineEdit);
2451      enableWidget(false, _cmbSamplSpinBox);
2452      enableWidget(false, _cmbUseGlonass);
2453    }
2454  }
2455
2456  // Upload(clk)
2457  // -----------
2458  int iRow = _uploadTable->rowCount();
2459  if (iRow > 0) {
2460    enableWidget(true, _uploadIntrComboBox);
2461    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2462    enableWidget(true, _uploadSamplClkRnxSpinBox);
2463    enableWidget(true, _uploadSamplSp3SpinBox);
2464    enableWidget(true, _uploadAntexFile);
2465  }
2466  else {
2467    enableWidget(false, _uploadIntrComboBox);
2468    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2469    enableWidget(false, _uploadSamplClkRnxSpinBox);
2470    enableWidget(false, _uploadSamplSp3SpinBox);
2471    enableWidget(false, _uploadAntexFile);
2472  }
2473
2474  // QC
2475  // --
2476  if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2477    enable = !_reqcActionComboBox->currentText().isEmpty();
2478    bool enable10   = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2479//  bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2480    enableWidget(enable,                            _reqcObsFileChooser);
2481    enableWidget(enable,                            _reqcNavFileChooser);
2482    enableWidget(enable,                            _reqcOutLogLineEdit);
2483    enableWidget(enable &&  enable10,               _reqcEditOptionButton);
2484    enableWidget(enable &&  enable10,               _reqcOutObsLineEdit);
2485    enableWidget(enable &&  enable10,               _reqcOutNavLineEdit);
2486    enableWidget(enable && !enable10,               _reqcLogSummaryOnly);
2487    enableWidget(enable && !enable10,               _reqcSkyPlotSignals);
2488//  enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2489    enableWidget(enable && !enable10,               _reqcPlotDirLineEdit);
2490  }
2491
2492  // SP3 File Comparison
2493  // -------------------
2494  if (sender() == 0 || sender() == _sp3CompFileChooser) {
2495    enable = !_sp3CompFileChooser->fileName().isEmpty();
2496    enableWidget(enable, _sp3CompLogLineEdit);
2497    enableWidget(enable, _sp3CompExclude);
2498  }
2499
2500  enableStartStop();
2501}
2502
2503//
2504////////////////////////////////////////////////////////////////////////////
2505void bncWindow::slotAddCmbRow() {
2506  int iRow = _cmbTable->rowCount();
2507  _cmbTable->insertRow(iRow);
2508  for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2509    _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2510  }
2511}
2512
2513//
2514////////////////////////////////////////////////////////////////////////////
2515void bncWindow::slotDelCmbRow() {
2516
2517  const static QPalette paletteWhite(QColor(255, 255, 255));
2518  const static QPalette paletteGray(QColor(230, 230, 230));
2519
2520  int nRows = _cmbTable->rowCount();
2521  bool flg[nRows];
2522  for (int iRow = 0; iRow < nRows; iRow++) {
2523    if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2524      flg[iRow] = true;
2525    }
2526    else {
2527      flg[iRow] = false;
2528    }
2529  }
2530  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2531    if (flg[iRow]) {
2532      _cmbTable->removeRow(iRow);
2533    }
2534  }
2535  nRows = _cmbTable->rowCount();
2536  if (nRows < 1) {
2537    enableWidget(false, _cmbMethodComboBox);
2538    enableWidget(false, _cmbMaxresLineEdit);
2539    enableWidget(false, _cmbSamplSpinBox);
2540    enableWidget(false, _cmbUseGlonass);
2541  }
2542}
2543
2544//
2545////////////////////////////////////////////////////////////////////////////
2546void bncWindow::populateCmbTable() {
2547
2548  for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2549    _cmbTable->removeRow(iRow);
2550  }
2551
2552  bncSettings settings;
2553
2554  int iRow = -1;
2555  QListIterator<QString> it(settings.value("cmbStreams").toStringList());
2556  while (it.hasNext()) {
2557    QStringList hlp = it.next().split(" ");
2558    if (hlp.size() > 2) {
2559      ++iRow;
2560      _cmbTable->insertRow(iRow);
2561    }
2562    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2563      _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2564    }
2565  }
2566}
2567
2568//
2569////////////////////////////////////////////////////////////////////////////
2570void bncWindow::slotAddUploadRow() {
2571  int iRow = _uploadTable->rowCount();
2572  _uploadTable->insertRow(iRow);
2573  for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2574    if      (iCol == 3) {
2575      QLineEdit* passwd = new QLineEdit();
2576      passwd->setFrame(false);
2577      passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2578      _uploadTable->setCellWidget(iRow, iCol, passwd);
2579    }
2580    else if (iCol == 4) {
2581      QComboBox* system = new QComboBox();
2582      system->setEditable(false);
2583      system->addItems(QString("IGS14,ETRF2000,NAD83,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2584      system->setFrame(false);
2585      _uploadTable->setCellWidget(iRow, iCol, system);
2586    }
2587    else if (iCol == 5) {
2588      QCheckBox* com = new QCheckBox();
2589      _uploadTable->setCellWidget(iRow, iCol, com);
2590    }
2591    else if (iCol == 11) {
2592      bncTableItem* bncIt = new bncTableItem();
2593      bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2594      _uploadTable->setItem(iRow, iCol, bncIt);
2595      BNC_CORE->_uploadTableItems[iRow] = bncIt;
2596    }
2597    else {
2598      _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2599    }
2600  }
2601}
2602
2603//
2604////////////////////////////////////////////////////////////////////////////
2605void bncWindow::slotDelUploadRow() {
2606  BNC_CORE->_uploadTableItems.clear();
2607  int nRows = _uploadTable->rowCount();
2608  bool flg[nRows];
2609  for (int iRow = 0; iRow < nRows; iRow++) {
2610    if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2611      flg[iRow] = true;
2612    }
2613    else {
2614      flg[iRow] = false;
2615    }
2616  }
2617  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2618    if (flg[iRow]) {
2619      _uploadTable->removeRow(iRow);
2620    }
2621  }
2622  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2623    BNC_CORE->_uploadTableItems[iRow] =
2624                                (bncTableItem*) _uploadTable->item(iRow, 11);
2625  }
2626  nRows = _uploadTable->rowCount();
2627  if (nRows < 1) {
2628    enableWidget(false, _uploadIntrComboBox);
2629    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2630    enableWidget(false, _uploadSamplSp3SpinBox);
2631    enableWidget(false, _uploadSamplClkRnxSpinBox);
2632    enableWidget(false, _uploadAntexFile);
2633  }
2634}
2635
2636//
2637////////////////////////////////////////////////////////////////////////////
2638void bncWindow::populateUploadTable() {
2639  for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2640    _uploadTable->removeRow(iRow);
2641  }
2642
2643  bncSettings settings;
2644
2645  int iRow = -1;
2646  QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2647  while (it.hasNext()) {
2648    QStringList hlp = it.next().split(",");
2649    if (hlp.size() > 6) {
2650      ++iRow;
2651      _uploadTable->insertRow(iRow);
2652    }
2653    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2654      if      (iCol == 3) {
2655        QLineEdit* passwd = new QLineEdit();
2656        passwd->setFrame(false);
2657        passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2658        passwd->setText(hlp[iCol]);
2659        _uploadTable->setCellWidget(iRow, iCol, passwd);
2660      }
2661      else if (iCol == 4) {
2662        QComboBox* system = new QComboBox();
2663        system->setEditable(false);
2664        system->addItems(QString(",IGS14,ETRF2000,NAD83,GDA2020,SIRGAS2000,DREF91,Custom").split(","));
2665        system->setFrame(false);
2666        system->setCurrentIndex(system->findText(hlp[iCol]));
2667        _uploadTable->setCellWidget(iRow, iCol, system);
2668      }
2669      else if (iCol == 5) {
2670        QCheckBox* com = new QCheckBox();
2671        if (hlp[iCol].toInt() == Qt::Checked) {
2672          com->setCheckState(Qt::Checked);
2673        }
2674        _uploadTable->setCellWidget(iRow, iCol, com);
2675      }
2676      else if (iCol == 11) {
2677        bncTableItem* bncIt = new bncTableItem();
2678        bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2679        _uploadTable->setItem(iRow, iCol, bncIt);
2680        BNC_CORE->_uploadTableItems[iRow] = bncIt;
2681      }
2682      else {
2683        _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2684      }
2685    }
2686  }
2687}
2688
2689//
2690////////////////////////////////////////////////////////////////////////////
2691void bncWindow::slotSetUploadTrafo() {
2692  bncCustomTrafo* dlg = new bncCustomTrafo(this);
2693  dlg->exec();
2694  delete dlg;
2695}
2696
2697// Progress Bar Change
2698////////////////////////////////////////////////////////////////////////////
2699void bncWindow::slotPostProcessingProgress(int nEpo) {
2700  _actStart->setText(QString("%1 Epochs").arg(nEpo));
2701}
2702
2703// Post-Processing Reqc Finished
2704////////////////////////////////////////////////////////////////////////////
2705void bncWindow::slotPostProcessingFinished() {
2706  delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2707  _runningPPP     = false;
2708  _runningEdit    = false;
2709  _runningQC      = false;
2710  _runningSp3Comp = false;
2711  _actStart->setText(tr("Sta&rt"));
2712  enableStartStop();
2713}
2714
2715// Edit teqc-like editing options
2716////////////////////////////////////////////////////////////////////////////
2717void bncWindow::slotReqcEditOption() {
2718  saveOptions();
2719  reqcDlg* dlg = new reqcDlg(this);
2720  dlg->move(this->pos().x()+50, this->pos().y()+50);
2721  dlg->exec();
2722  delete dlg;
2723}
2724
2725// Enable/Disable Start and Stop Buttons
2726////////////////////////////////////////////////////////////////////////////
2727void bncWindow::enableStartStop() {
2728  if ( running() ) {
2729    _actStart->setEnabled(false);
2730    if (_runningRealTime || _runningPPP) {
2731      _actStop->setEnabled(true);
2732    }
2733  }
2734  else {
2735    _actStart->setEnabled(true);
2736    _actStop->setEnabled(false);
2737  }
2738}
2739
2740// Show Map
2741////////////////////////////////////////////////////////////////////////////
2742void bncWindow::slotMapMountPoints() {
2743  saveOptions();
2744  t_bncMap* bncMap = new t_bncMap(this);
2745  bncMap->setMinimumSize(800, 600);
2746  bncMap->setWindowTitle("Selected Mountpoints");
2747
2748  bncSettings settings;
2749  QListIterator<QString> it(settings.value("mountPoints").toStringList());
2750  while (it.hasNext()) {
2751    QStringList hlp = it.next().split(" ");
2752    if (hlp.size() < 5) continue;
2753    QUrl   url(hlp[0]);
2754    double latDeg = hlp[3].toDouble();
2755    double lonDeg = hlp[4].toDouble();
2756    bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2757  }
2758
2759  bncMap->show();
2760}
2761
2762// Show Map
2763////////////////////////////////////////////////////////////////////////////
2764void bncWindow::slotMapPPP() {
2765#ifdef QT_WEBKIT
2766  saveOptions();
2767  enableWidget(false, _pppWidgets._mapWinButton);
2768  enableWidget(false, _pppWidgets._useGoogleMap);
2769  enableWidget(false, _pppWidgets._useOpenStreetMap);
2770  enableWidget(false, _pppWidgets._mapWinDotSize);
2771  enableWidget(false, _pppWidgets._mapWinDotColor);
2772
2773  if (!_mapWin) {
2774    _mapWin = new bncMapWin(this);
2775    connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2776    connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2777            _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2778  }
2779  _mapWin->show();
2780#else
2781  QMessageBox::information(this, "Information",
2782                           "Qt Library compiled without QtWebKit");
2783#endif
2784}
2785
2786// Show Map
2787////////////////////////////////////////////////////////////////////////////
2788void bncWindow::slotMapPPPClosed() {
2789#ifdef QT_WEBKIT
2790  enableWidget(true, _pppWidgets._mapWinButton);
2791  enableWidget(true, _pppWidgets._useGoogleMap);
2792  enableWidget(true, _pppWidgets._useOpenStreetMap);
2793  enableWidget(true, _pppWidgets._mapWinDotSize);
2794  enableWidget(true, _pppWidgets._mapWinDotColor);
2795  if (_mapWin) {
2796    QListIterator<bncGetThread*> it(_threads);
2797    while (it.hasNext()) {
2798      bncGetThread* thread = it.next();
2799      thread->disconnect(_mapWin);
2800    }
2801    _mapWin->deleteLater();
2802    _mapWin = 0;
2803  }
2804#endif
2805}
Note: See TracBrowser for help on using the repository browser.