source: ntrip/branches/BNC_2.12/src/bncwindow.cpp @ 7950

Last change on this file since 7950 was 7950, checked in by stuerze, 3 years ago

bug fixed regarding map generation from sourcetable entry

File size: 150.0 KB
Line 
1// Part of BNC, a utility for retrieving decoding and
2// converting GNSS data streams from NTRIP broadcasters.
3//
4// Copyright (C) 2007
5// German Federal Agency for Cartography and Geodesy (BKG)
6// http://www.bkg.bund.de
7// Czech Technical University Prague, Department of Geodesy
8// http://www.fsv.cvut.cz
9//
10// Email: euref-ip@bkg.bund.de
11//
12// This program is free software; you can redistribute it and/or
13// modify it under the terms of the GNU General Public License
14// as published by the Free Software Foundation, version 2.
15//
16// This program is distributed in the hope that it will be useful,
17// but WITHOUT ANY WARRANTY; without even the implied warranty of
18// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19// GNU General Public License for more details.
20//
21// You should have received a copy of the GNU General Public License
22// along with this program; if not, write to the Free Software
23// Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24
25/* -------------------------------------------------------------------------
26 * BKG NTRIP Client
27 * -------------------------------------------------------------------------
28 *
29 * Class:      bncWindow
30 *
31 * Purpose:    This class implements the main application window.
32 *
33 * Author:     L. Mervart
34 *
35 * Created:    24-Dec-2005
36 *
37 * Changes:
38 *
39 * -----------------------------------------------------------------------*/
40
41#include <iostream>
42
43#include <unistd.h>
44#include "bncwindow.h"
45#include "bnccore.h"
46#include "bncgetthread.h"
47#include "bnctabledlg.h"
48#include "bncipport.h"
49#include "bncudpport.h"
50#include "bncserialport.h"
51#include "bnchlpdlg.h"
52#include "bnchtml.h"
53#include "bnctableitem.h"
54#include "bncsettings.h"
55#include "bncfigure.h"
56#include "bncfigurelate.h"
57#include "bncfigureppp.h"
58#include "bncversion.h"
59#include "bncbytescounter.h"
60#include "bncsslconfig.h"
61#include "upload/bnccustomtrafo.h"
62#include "upload/bncephuploadcaster.h"
63#include "qtfilechooser.h"
64#include "reqcdlg.h"
65#include "bncmap.h"
66#include "rinex/reqcedit.h"
67#include "rinex/reqcanalyze.h"
68#include "orbComp/sp3Comp.h"
69#ifdef QT_WEBKIT
70#  include "map/bncmapwin.h"
71#endif
72
73using namespace std;
74
75#ifdef GNSSCENTER_PLUGIN
76Q_EXPORT_PLUGIN2(gnsscenter_bnc, t_bncFactory)
77#endif
78
79// Constructor
80////////////////////////////////////////////////////////////////////////////
81bncWindow::bncWindow() {
82
83  const static QPalette paletteWhite(QColor(255, 255, 255));
84  const static QPalette paletteGray(QColor(230, 230, 230));
85
86#ifdef GNSSCENTER_PLUGIN
87  BNC_CORE->setConfFileName("");
88#endif
89
90  _caster    = 0;
91  _casterEph = 0;
92
93  _bncFigure     = new bncFigure(this);
94  _bncFigureLate = new bncFigureLate(this);
95  _bncFigurePPP  = new bncFigurePPP(this);
96
97  connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
98          _bncFigurePPP, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
99
100  connect(BNC_CORE, SIGNAL(progressRnxPPP(int)), this, SLOT(slotPostProcessingProgress(int)));
101  connect(BNC_CORE, SIGNAL(finishedRnxPPP()),    this, SLOT(slotPostProcessingFinished()));
102
103  _runningRealTime    = false;
104  _runningPPP         = false;
105  _runningEdit        = false;
106  _runningQC          = false;
107  _runningSp3Comp     = false;
108  _reqcActionComboBox = 0; // necessary for enableStartStop()
109
110  _mapWin = 0;
111
112  int ww = QFontMetrics(this->font()).width('w');
113
114  static const QStringList labels = QString("account, Streams:   resource loader / mountpoint, decoder, country, lat, long, nmea, ntrip, bytes").split(",");
115
116  setMinimumSize(100*ww, 70*ww);
117
118  setWindowTitle(tr("BKG Ntrip Client (BNC) Version " BNCVERSION));
119
120  connect(BNC_CORE, SIGNAL(newMessage(QByteArray,bool)),
121          this, SLOT(slotWindowMessage(QByteArray,bool)));
122
123  // Create Actions
124  // --------------
125  _actHelp = new QAction(tr("&Help Contents"),this);
126  connect(_actHelp, SIGNAL(triggered()), SLOT(slotHelp()));
127
128  _actAbout = new QAction(tr("&About BNC"),this);
129  connect(_actAbout, SIGNAL(triggered()), SLOT(slotAbout()));
130
131  _actFlowchart = new QAction(tr("&Flow Chart"),this);
132  connect(_actFlowchart, SIGNAL(triggered()), SLOT(slotFlowchart()));
133
134  _actFontSel = new QAction(tr("Select &Font"),this);
135  connect(_actFontSel, SIGNAL(triggered()), SLOT(slotFontSel()));
136
137  _actSaveOpt = new QAction(tr("&Reread && Save Configuration"),this);
138  connect(_actSaveOpt, SIGNAL(triggered()), SLOT(slotSaveOptions()));
139
140  _actQuit  = new QAction(tr("&Quit"),this);
141  connect(_actQuit, SIGNAL(triggered()), SLOT(close()));
142
143  _actAddMountPoints = new QAction(tr("Add &Stream"),this);
144  connect(_actAddMountPoints, SIGNAL(triggered()), SLOT(slotAddMountPoints()));
145
146  _actDeleteMountPoints = new QAction(tr("&Delete Stream"),this);
147  connect(_actDeleteMountPoints, SIGNAL(triggered()), SLOT(slotDeleteMountPoints()));
148  _actDeleteMountPoints->setEnabled(false);
149
150  _actMapMountPoints = new QAction(tr("&Map"),this);
151  connect(_actMapMountPoints, SIGNAL(triggered()), SLOT(slotMapMountPoints()));
152
153  _actStart = new QAction(tr("Sta&rt"),this);
154  connect(_actStart, SIGNAL(triggered()), SLOT(slotStart()));
155
156  _actStop = new QAction(tr("Sto&p"),this);
157  connect(_actStop, SIGNAL(triggered()), SLOT(slotStop()));
158
159  _actwhatsthis= new QAction(tr("Help?=Shift+F1"),this);
160  connect(_actwhatsthis, SIGNAL(triggered()), SLOT(slotWhatsThis()));
161
162  CreateMenu();
163  AddToolbar();
164
165  bncSettings settings;
166
167  // Network Options
168  // ---------------
169  _proxyHostLineEdit  = new QLineEdit(settings.value("proxyHost").toString());
170  _proxyPortLineEdit  = new QLineEdit(settings.value("proxyPort").toString());
171
172  connect(_proxyHostLineEdit, SIGNAL(textChanged(const QString &)),
173          this, SLOT(slotBncTextChanged()));
174
175  _sslCaCertPathLineEdit   = new QLineEdit(settings.value("sslCaCertPath").toString());
176  _sslIgnoreErrorsCheckBox = new QCheckBox();
177  _sslIgnoreErrorsCheckBox->setCheckState(Qt::CheckState(
178                                          settings.value("sslIgnoreErrors").toInt()));
179
180  // General Options
181  // ---------------
182  _logFileLineEdit    = new QLineEdit(settings.value("logFile").toString());
183  _rawOutFileLineEdit = new QLineEdit(settings.value("rawOutFile").toString());
184  _rnxAppendCheckBox  = new QCheckBox();
185  _rnxAppendCheckBox->setCheckState(Qt::CheckState(
186                                    settings.value("rnxAppend").toInt()));
187  _onTheFlyComboBox = new QComboBox();
188  _onTheFlyComboBox->setEditable(false);
189  _onTheFlyComboBox->addItems(QString("1 day,1 hour,5 min,1 min").split(","));
190  int ii = _onTheFlyComboBox->findText(settings.value("onTheFlyInterval").toString());
191  if (ii != -1) {
192    _onTheFlyComboBox->setCurrentIndex(ii);
193  }
194  _autoStartCheckBox  = new QCheckBox();
195  _autoStartCheckBox->setCheckState(Qt::CheckState(
196                                    settings.value("autoStart").toInt()));
197
198  // RINEX Observations Options
199  // --------------------------
200  _rnxPathLineEdit    = new QLineEdit(settings.value("rnxPath").toString());
201  _rnxIntrComboBox    = new QComboBox();
202  _rnxIntrComboBox->setEditable(false);
203  _rnxIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
204  ii = _rnxIntrComboBox->findText(settings.value("rnxIntr").toString());
205  if (ii != -1) {
206    _rnxIntrComboBox->setCurrentIndex(ii);
207  }
208  _rnxSamplSpinBox    = new QSpinBox();
209  _rnxSamplSpinBox->setMinimum(0);
210  _rnxSamplSpinBox->setMaximum(60);
211  _rnxSamplSpinBox->setSingleStep(5);
212  _rnxSamplSpinBox->setValue(settings.value("rnxSampl").toInt());
213  _rnxFileCheckBox = new QCheckBox();
214  _rnxFileCheckBox->setCheckState(Qt::CheckState(settings.value("rnxOnlyWithSKL").toInt()));
215  _rnxSamplSpinBox->setSuffix(" sec");
216  _rnxSkelLineEdit    = new QLineEdit(settings.value("rnxSkel").toString());
217  _rnxSkelLineEdit->setMaximumWidth(5*ww);
218  _rnxScrpLineEdit    = new QLineEdit(settings.value("rnxScript").toString());
219  _rnxV3CheckBox      = new QCheckBox();
220  _rnxV3CheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3").toInt()));
221  _rnxV3filenameCheckBox = new QCheckBox();
222  _rnxV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("rnxV3filenames").toInt()));
223  QString hlp = settings.value("rnxV2Priority").toString();
224  if (hlp.isEmpty()) {
225    hlp = "CWPX_?";
226  }
227  _rnxV2Priority = new QLineEdit(hlp);
228
229  connect(_rnxPathLineEdit, SIGNAL(textChanged(const QString &)),
230          this, SLOT(slotBncTextChanged()));
231  connect(_rnxV3CheckBox, SIGNAL(stateChanged(int)),
232          this, SLOT(slotBncTextChanged()));
233
234  // RINEX Ephemeris Options
235  // -----------------------
236  _ephPathLineEdit    = new QLineEdit(settings.value("ephPath").toString());
237  _ephIntrComboBox    = new QComboBox();
238  _ephIntrComboBox->setEditable(false);
239  _ephIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
240  int jj = _ephIntrComboBox->findText(settings.value("ephIntr").toString());
241  if (jj != -1) {
242    _ephIntrComboBox->setCurrentIndex(jj);
243  }
244  _ephOutPortLineEdit    = new QLineEdit(settings.value("ephOutPort").toString());
245  _ephV3CheckBox = new QCheckBox();
246  _ephV3CheckBox->setCheckState(Qt::CheckState(settings.value("ephV3").toInt()));
247
248  _ephV3filenameCheckBox = new QCheckBox();
249  _ephV3filenameCheckBox->setCheckState(Qt::CheckState(settings.value("ephV3filenames").toInt()));
250
251  connect(_ephOutPortLineEdit, SIGNAL(textChanged(const QString &)),
252          this, SLOT(slotBncTextChanged()));
253
254  connect(_ephPathLineEdit, SIGNAL(textChanged(const QString &)),
255          this, SLOT(slotBncTextChanged()));
256
257  // Broadcast Corrections Options
258  // -----------------------------
259  _corrPathLineEdit    = new QLineEdit(settings.value("corrPath").toString());
260  _corrIntrComboBox    = new QComboBox();
261  _corrIntrComboBox->setEditable(false);
262  _corrIntrComboBox->addItems(QString("1 min,2 min,5 min,10 min,15 min,30 min,1 hour,1 day").split(","));
263  int mm = _corrIntrComboBox->findText(settings.value("corrIntr").toString());
264  if (mm != -1) {
265    _corrIntrComboBox->setCurrentIndex(mm);
266  }
267  _corrPortLineEdit    = new QLineEdit(settings.value("corrPort").toString());
268
269  connect(_corrPathLineEdit, SIGNAL(textChanged(const QString &)),
270          this, SLOT(slotBncTextChanged()));
271
272  connect(_corrPortLineEdit, SIGNAL(textChanged(const QString &)),
273          this, SLOT(slotBncTextChanged()));
274
275  // Feed Engine Options
276  // -------------------
277  _outPortLineEdit    = new QLineEdit(settings.value("outPort").toString());
278  _outWaitSpinBox   = new QSpinBox();
279  _outWaitSpinBox->setMinimum(1);
280  _outWaitSpinBox->setMaximum(30);
281  _outWaitSpinBox->setSingleStep(1);
282  _outWaitSpinBox->setSuffix(" sec");
283  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
284  _outSamplSpinBox    = new QSpinBox();
285  _outSamplSpinBox->setMinimum(0);
286  _outSamplSpinBox->setMaximum(60);
287  _outSamplSpinBox->setSingleStep(5);
288  _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
289  _outSamplSpinBox->setSuffix(" sec");
290  _outFileLineEdit    = new QLineEdit(settings.value("outFile").toString());
291  _outUPortLineEdit   = new QLineEdit(settings.value("outUPort").toString());
292
293  connect(_outPortLineEdit, SIGNAL(textChanged(const QString &)),
294          this, SLOT(slotBncTextChanged()));
295
296  connect(_outFileLineEdit, SIGNAL(textChanged(const QString &)),
297          this, SLOT(slotBncTextChanged()));
298
299  // Serial Output Options
300  // ---------------------
301  _serialMountPointLineEdit = new QLineEdit(settings.value("serialMountPoint").toString());
302  _serialPortNameLineEdit = new QLineEdit(settings.value("serialPortName").toString());
303  _serialBaudRateComboBox = new QComboBox();
304  _serialBaudRateComboBox->addItems(QString("110,300,600,"
305            "1200,2400,4800,9600,19200,38400,57600,115200").split(","));
306  int kk = _serialBaudRateComboBox->findText(settings.value("serialBaudRate").toString());
307  if (kk != -1) {
308    _serialBaudRateComboBox->setCurrentIndex(kk);
309  }
310  _serialFlowControlComboBox = new QComboBox();
311  _serialFlowControlComboBox->addItems(QString("OFF,XONXOFF,HARDWARE").split(","));
312  kk = _serialFlowControlComboBox->findText(settings.value("serialFlowControl").toString());
313  if (kk != -1) {
314    _serialFlowControlComboBox->setCurrentIndex(kk);
315  }
316  _serialDataBitsComboBox = new QComboBox();
317  _serialDataBitsComboBox->addItems(QString("5,6,7,8").split(","));
318  kk = _serialDataBitsComboBox->findText(settings.value("serialDataBits").toString());
319  if (kk != -1) {
320    _serialDataBitsComboBox->setCurrentIndex(kk);
321  }
322  _serialParityComboBox   = new QComboBox();
323  _serialParityComboBox->addItems(QString("NONE,ODD,EVEN,SPACE").split(","));
324  kk = _serialParityComboBox->findText(settings.value("serialParity").toString());
325  if (kk != -1) {
326    _serialParityComboBox->setCurrentIndex(kk);
327  }
328  _serialStopBitsComboBox = new QComboBox();
329  _serialStopBitsComboBox->addItems(QString("1,2").split(","));
330  kk = _serialStopBitsComboBox->findText(settings.value("serialStopBits").toString());
331  if (kk != -1) {
332    _serialStopBitsComboBox->setCurrentIndex(kk);
333  }
334  _serialAutoNMEAComboBox  = new QComboBox();
335  _serialAutoNMEAComboBox->addItems(QString("no,Auto,Manual GPGGA,Manual GNGGA").split(","));
336  kk = _serialAutoNMEAComboBox->findText(settings.value("serialAutoNMEA").toString());
337  if (kk != -1) {
338    _serialAutoNMEAComboBox->setCurrentIndex(kk);
339  }
340  _serialFileNMEALineEdit    = new QLineEdit(settings.value("serialFileNMEA").toString());
341  _serialHeightNMEALineEdit  = new QLineEdit(settings.value("serialHeightNMEA").toString());
342
343  _serialManualNMEASamplingSpinBox = new QSpinBox();
344  _serialManualNMEASamplingSpinBox->setMinimum(0);
345  _serialManualNMEASamplingSpinBox->setMaximum(300);
346  _serialManualNMEASamplingSpinBox->setSingleStep(10);
347  _serialManualNMEASamplingSpinBox->setValue(settings.value("serialManualNMEASampling").toInt());
348  _serialManualNMEASamplingSpinBox->setSuffix(" sec");
349
350  connect(_serialMountPointLineEdit, SIGNAL(textChanged(const QString &)),
351          this, SLOT(slotBncTextChanged()));
352
353  connect(_serialAutoNMEAComboBox, SIGNAL(currentIndexChanged(const QString &)),
354          this, SLOT(slotBncTextChanged()));
355
356  // Outages Options
357  // ---------------
358  _adviseObsRateComboBox    = new QComboBox();
359  _adviseObsRateComboBox->setEditable(false);
360  _adviseObsRateComboBox->addItems(QString(",0.1 Hz,0.2 Hz,0.5 Hz,1 Hz,5 Hz").split(","));
361  kk = _adviseObsRateComboBox->findText(settings.value("adviseObsRate").toString());
362  if (kk != -1) {
363    _adviseObsRateComboBox->setCurrentIndex(kk);
364  }
365  _adviseFailSpinBox = new QSpinBox();
366  _adviseFailSpinBox->setMinimum(0);
367  _adviseFailSpinBox->setMaximum(60);
368  _adviseFailSpinBox->setSingleStep(1);
369  _adviseFailSpinBox->setSuffix(" min");
370  _adviseFailSpinBox->setValue(settings.value("adviseFail").toInt());
371  _adviseRecoSpinBox = new QSpinBox();
372  _adviseRecoSpinBox->setMinimum(0);
373  _adviseRecoSpinBox->setMaximum(60);
374  _adviseRecoSpinBox->setSingleStep(1);
375  _adviseRecoSpinBox->setSuffix(" min");
376  _adviseRecoSpinBox->setValue(settings.value("adviseReco").toInt());
377  _adviseScriptLineEdit    = new QLineEdit(settings.value("adviseScript").toString());
378
379  connect(_adviseObsRateComboBox, SIGNAL(currentIndexChanged(const QString &)),
380          this, SLOT(slotBncTextChanged()));
381
382  // Miscellaneous Options
383  // ---------------------
384  _miscMountLineEdit  = new QLineEdit(settings.value("miscMount").toString());
385  _miscPortLineEdit   = new QLineEdit(settings.value("miscPort").toString());
386  _miscIntrComboBox   = new QComboBox();
387  _miscIntrComboBox->setEditable(false);
388  _miscIntrComboBox->addItems(QString(",2 sec,10 sec,1 min,5 min,15 min,1 hour,6 hours,1 day").split(","));
389  int ll = _miscIntrComboBox->findText(settings.value("miscIntr").toString());
390  if (ll != -1) {
391    _miscIntrComboBox->setCurrentIndex(ll);
392  }
393  _miscScanRTCMCheckBox  = new QCheckBox();
394  _miscScanRTCMCheckBox->setCheckState(Qt::CheckState(
395                                    settings.value("miscScanRTCM").toInt()));
396
397  connect(_miscMountLineEdit, SIGNAL(textChanged(const QString &)),
398          this, SLOT(slotBncTextChanged()));
399
400  // Streams
401  // -------
402  _mountPointsTable   = new QTableWidget(0,9);
403
404  _mountPointsTable->horizontalHeader()->resizeSection(1,34*ww);
405  _mountPointsTable->horizontalHeader()->resizeSection(2,9*ww);
406  _mountPointsTable->horizontalHeader()->resizeSection(3,9*ww);
407  _mountPointsTable->horizontalHeader()->resizeSection(4,7*ww);
408  _mountPointsTable->horizontalHeader()->resizeSection(5,7*ww);
409  _mountPointsTable->horizontalHeader()->resizeSection(6,5*ww);
410  _mountPointsTable->horizontalHeader()->resizeSection(7,5*ww);
411  _mountPointsTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
412  _mountPointsTable->horizontalHeader()->setStretchLastSection(true);
413  _mountPointsTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
414  _mountPointsTable->setHorizontalHeaderLabels(labels);
415  _mountPointsTable->setGridStyle(Qt::NoPen);
416  _mountPointsTable->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
417  _mountPointsTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
418  _mountPointsTable->setSelectionBehavior(QAbstractItemView::SelectRows);
419  _mountPointsTable->hideColumn(0);
420  _mountPointsTable->hideColumn(3);
421  connect(_mountPointsTable, SIGNAL(itemSelectionChanged()),
422          SLOT(slotSelectionChanged()));
423  populateMountPointsTable();
424
425  _log = new QTextEdit();
426  _log->setReadOnly(true);
427  QFont msFont(""); msFont.setStyleHint(QFont::TypeWriter); // default monospace font
428  _log->setFont(msFont);
429  _log->document()->setMaximumBlockCount(1000);
430
431  // Combine Corrections
432  // -------------------
433  _cmbTable = new QTableWidget(0,3);
434  _cmbTable->setHorizontalHeaderLabels(QString("Mountpoint, AC Name, Weight").split(","));
435  _cmbTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
436  _cmbTable->setSelectionBehavior(QAbstractItemView::SelectRows);
437  _cmbTable->setMaximumWidth(30*ww);
438  _cmbTable->horizontalHeader()->resizeSection(0,10*ww);
439  _cmbTable->horizontalHeader()->resizeSection(1,8*ww);
440  _cmbTable->horizontalHeader()->resizeSection(2,8*ww);
441  _cmbTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
442  _cmbTable->horizontalHeader()->setStretchLastSection(true);
443  _cmbTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
444
445  _cmbMaxresLineEdit = new QLineEdit(settings.value("cmbMaxres").toString());
446  _cmbUseGlonass     = new QCheckBox();
447  _cmbUseGlonass->setCheckState(Qt::CheckState(settings.value("cmbUseGlonass").toInt()));
448
449  _cmbSamplSpinBox = new QSpinBox;
450  _cmbSamplSpinBox->setMinimum(10);
451  _cmbSamplSpinBox->setMaximum(60);
452  _cmbSamplSpinBox->setSingleStep(10);
453  _cmbSamplSpinBox->setMaximumWidth(9*ww);
454  _cmbSamplSpinBox->setValue(settings.value("cmbSampl").toInt());
455  _cmbSamplSpinBox->setSuffix(" sec");
456
457  QPushButton* addCmbRowButton = new QPushButton("Add Row");
458  QPushButton* delCmbRowButton = new QPushButton("Delete");
459
460  connect(_cmbTable, SIGNAL(itemSelectionChanged()),
461          SLOT(slotBncTextChanged()));
462
463  _cmbMethodComboBox = new QComboBox();
464  _cmbMethodComboBox->setEditable(false);
465  _cmbMethodComboBox->addItems(QString("Filter,Single-Epoch").split(","));
466  int im = _cmbMethodComboBox->findText(settings.value("cmbMethod").toString());
467  if (im != -1) {
468    _cmbMethodComboBox->setCurrentIndex(im);
469  }
470
471  int iRow = _cmbTable->rowCount();
472  if (iRow > 0) {
473    enableWidget(true, _cmbMethodComboBox);
474    enableWidget(true, _cmbMaxresLineEdit);
475    enableWidget(true, _cmbSamplSpinBox);
476    enableWidget(true, _cmbUseGlonass);
477  }
478  else {
479    enableWidget(false, _cmbMethodComboBox);
480    enableWidget(false, _cmbMaxresLineEdit);
481    enableWidget(false, _cmbSamplSpinBox);
482    enableWidget(false, _cmbUseGlonass);
483  }
484
485  // Upload Results
486  // -------------
487  _uploadTable = new QTableWidget(0,12);
488  _uploadTable->setHorizontalHeaderLabels(QString("Host, Port, Mount, Password, System, CoM, SP3 File, RNX File, PID, SID, IOD, bytes").split(","));
489  _uploadTable->setSelectionMode(QAbstractItemView::ExtendedSelection);
490  _uploadTable->setSelectionBehavior(QAbstractItemView::SelectRows);
491  _uploadTable->horizontalHeader()->resizeSection( 0,13*ww);
492  _uploadTable->horizontalHeader()->resizeSection( 1, 5*ww);
493  _uploadTable->horizontalHeader()->resizeSection( 2, 6*ww);
494  _uploadTable->horizontalHeader()->resizeSection( 3, 8*ww);
495  _uploadTable->horizontalHeader()->resizeSection( 4,11*ww);
496  _uploadTable->horizontalHeader()->resizeSection( 5, 4*ww);
497  _uploadTable->horizontalHeader()->resizeSection( 6,15*ww);
498  _uploadTable->horizontalHeader()->resizeSection( 7,15*ww);
499  _uploadTable->horizontalHeader()->resizeSection( 8, 4*ww);
500  _uploadTable->horizontalHeader()->resizeSection( 9, 4*ww);
501  _uploadTable->horizontalHeader()->resizeSection(10, 4*ww);
502  _uploadTable->horizontalHeader()->resizeSection(11,12*ww);
503  _uploadTable->horizontalHeader()->setResizeMode(QHeaderView::Interactive);
504  _uploadTable->horizontalHeader()->setStretchLastSection(true);
505  _uploadTable->horizontalHeader()->setDefaultAlignment(Qt::AlignLeft);
506
507  connect(_uploadTable, SIGNAL(itemSelectionChanged()),
508          SLOT(slotBncTextChanged()));
509
510  QPushButton* addUploadRowButton = new QPushButton("Add Row");
511  QPushButton* delUploadRowButton = new QPushButton("Del Row");
512  QPushButton* setUploadTrafoButton = new QPushButton("Custom Trafo");
513  _uploadIntrComboBox = new QComboBox;
514  _uploadIntrComboBox->setEditable(false);
515  _uploadIntrComboBox->addItems(QString("1 day,1 hour, 30 min,15 min,10 min,5 min,2 min,1 min").split(","));
516  ii = _uploadIntrComboBox->findText(settings.value("uploadIntr").toString());
517  if (ii != -1) {
518    _uploadIntrComboBox->setCurrentIndex(ii);
519  }
520
521  _uploadAntexFile      = new qtFileChooser(0, qtFileChooser::File);
522  _uploadAntexFile->setFileName(settings.value("uploadAntexFile").toString());
523
524  _uploadSamplRtcmEphCorrSpinBox = new QSpinBox;
525  _uploadSamplRtcmEphCorrSpinBox->setMinimum(0);
526  _uploadSamplRtcmEphCorrSpinBox->setMaximum(60);
527  _uploadSamplRtcmEphCorrSpinBox->setSingleStep(5);
528  _uploadSamplRtcmEphCorrSpinBox->setMaximumWidth(9*ww);
529  _uploadSamplRtcmEphCorrSpinBox->setValue(settings.value("uploadSamplRtcmEphCorr").toInt());
530  _uploadSamplRtcmEphCorrSpinBox->setSuffix(" sec");
531
532  _uploadSamplSp3SpinBox = new QSpinBox;
533  _uploadSamplSp3SpinBox->setMinimum(0);
534  _uploadSamplSp3SpinBox->setMaximum(15);
535  _uploadSamplSp3SpinBox->setSingleStep(1);
536  _uploadSamplSp3SpinBox->setMaximumWidth(9*ww);
537  _uploadSamplSp3SpinBox->setValue(settings.value("uploadSamplSp3").toInt());
538  _uploadSamplSp3SpinBox->setSuffix(" min");
539
540  _uploadSamplClkRnxSpinBox = new QSpinBox;
541  _uploadSamplClkRnxSpinBox->setMinimum(0);
542  _uploadSamplClkRnxSpinBox->setMaximum(60);
543  _uploadSamplClkRnxSpinBox->setSingleStep(5);
544  _uploadSamplClkRnxSpinBox->setMaximumWidth(9*ww);
545  _uploadSamplClkRnxSpinBox->setValue(settings.value("uploadSamplClkRnx").toInt());
546  _uploadSamplClkRnxSpinBox->setSuffix(" sec");
547
548  int iRowT = _uploadTable->rowCount();
549  if (iRowT > 0) {
550    enableWidget(true, _uploadIntrComboBox);
551    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
552    enableWidget(true, _uploadSamplSp3SpinBox);
553    enableWidget(true, _uploadSamplClkRnxSpinBox);
554    enableWidget(true, _uploadAntexFile);
555  }
556  else {
557    enableWidget(false, _uploadIntrComboBox);
558    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
559    enableWidget(false, _uploadSamplSp3SpinBox);
560    enableWidget(false, _uploadSamplClkRnxSpinBox);
561    enableWidget(false, _uploadAntexFile);
562  }
563
564  // Upload RTCM3 Ephemeris
565  // ----------------------
566  _uploadEphHostLineEdit       = new QLineEdit(settings.value("uploadEphHost").toString());
567  _uploadEphPortLineEdit       = new QLineEdit(settings.value("uploadEphPort").toString());
568  _uploadEphPasswordLineEdit   = new QLineEdit(settings.value("uploadEphPassword").toString());
569  _uploadEphPasswordLineEdit->setEchoMode(QLineEdit::PasswordEchoOnEdit);
570  _uploadEphMountpointLineEdit = new QLineEdit(settings.value("uploadEphMountpoint").toString());
571  _uploadEphSampleSpinBox      = new QSpinBox;
572  _uploadEphSampleSpinBox->setMinimum(5);
573  _uploadEphSampleSpinBox->setMaximum(60);
574  _uploadEphSampleSpinBox->setSingleStep(5);
575  _uploadEphSampleSpinBox->setMaximumWidth(9*ww);
576  _uploadEphSampleSpinBox->setValue(settings.value("uploadEphSample").toInt());
577  _uploadEphSampleSpinBox->setSuffix(" sec");
578  _uploadEphBytesCounter       = new bncBytesCounter;
579
580  // Canvas with Editable Fields
581  // ---------------------------
582  _canvas = new QWidget;
583  setCentralWidget(_canvas);
584
585  _aogroup = new QTabWidget();
586  _aogroup->setElideMode(Qt::ElideNone);
587  _aogroup->setUsesScrollButtons(true);
588  QWidget* pgroup = new QWidget();
589  QWidget* ggroup = new QWidget();
590  QWidget* sgroup = new QWidget();
591  QWidget* egroup = new QWidget();
592  QWidget* agroup = new QWidget();
593  QWidget* cgroup = new QWidget();
594  QWidget* ogroup = new QWidget();
595  QWidget* rgroup = new QWidget();
596  QWidget* sergroup = new QWidget();
597  QWidget* pppGroup1 = new QWidget();
598  QWidget* pppGroup2 = new QWidget();
599  QWidget* pppGroup3 = new QWidget();
600  QWidget* pppGroup4 = new QWidget();
601  QWidget* reqcgroup = new QWidget();
602  QWidget* sp3CompGroup = new QWidget();
603  QWidget* cmbgroup = new QWidget();
604  QWidget* uploadgroup = new QWidget();
605  QWidget* uploadEphgroup = new QWidget();
606  _aogroup->addTab(pgroup,tr("Network"));
607  _aogroup->addTab(ggroup,tr("General"));
608  _aogroup->addTab(ogroup,tr("RINEX Observations"));
609  _aogroup->addTab(egroup,tr("RINEX Ephemeris"));
610  _aogroup->addTab(reqcgroup,tr("RINEX Editing && QC"));
611  _aogroup->addTab(sp3CompGroup,tr("SP3 Comparison"));
612  _aogroup->addTab(cgroup,tr("Broadcast Corrections"));
613  _aogroup->addTab(sgroup,tr("Feed Engine"));
614  _aogroup->addTab(sergroup,tr("Serial Output"));
615  _aogroup->addTab(agroup,tr("Outages"));
616  _aogroup->addTab(rgroup,tr("Miscellaneous"));
617  _aogroup->addTab(pppGroup1,tr("PPP (1)"));
618  _aogroup->addTab(pppGroup2,tr("PPP (2)"));
619  _aogroup->addTab(pppGroup3,tr("PPP (3)"));
620  _aogroup->addTab(pppGroup4,tr("PPP (4)"));
621  _aogroup->addTab(cmbgroup,tr("Combine Corrections"));
622  _aogroup->addTab(uploadgroup,tr("Upload Corrections"));
623  _aogroup->addTab(uploadEphgroup,tr("Upload Ephemeris"));
624
625  // Log Tab
626  // -------
627  _loggroup = new QTabWidget();
628  _loggroup->addTab(_log,tr("Log"));
629  _loggroup->addTab(_bncFigure,tr("Throughput"));
630  _loggroup->addTab(_bncFigureLate,tr("Latency"));
631  _loggroup->addTab(_bncFigurePPP,tr("PPP Plot"));
632
633  // Netowork (Proxy and SSL) Tab
634  // ----------------------------
635  QGridLayout* pLayout = new QGridLayout;
636  pLayout->setColumnMinimumWidth(0,13*ww);
637  _proxyPortLineEdit->setMaximumWidth(9*ww);
638
639  pLayout->addWidget(new QLabel("Settings for proxy in protected networks and for SSL authorization, leave boxes blank if none.<br>"),0, 0, 1, 50);
640  pLayout->addWidget(new QLabel("Proxy host"),                               1, 0);
641  pLayout->addWidget(_proxyHostLineEdit,                                     1, 1, 1,10);
642  pLayout->addWidget(new QLabel("Proxy port"),                               2, 0);
643  pLayout->addWidget(_proxyPortLineEdit,                                     2, 1);
644  pLayout->addWidget(new QLabel("Path to SSL certificates"),                 3, 0);
645  pLayout->addWidget(_sslCaCertPathLineEdit,                                 3, 1, 1,10);
646  pLayout->addWidget(new QLabel("Default:  " + bncSslConfig::defaultPath()), 3,11, 1,20);
647  pLayout->addWidget(new QLabel("Ignore SSL authorization errors"),          4, 0);
648  pLayout->addWidget(_sslIgnoreErrorsCheckBox,                               4, 1, 1,10);
649  pLayout->addWidget(new QLabel(""),                                         5, 1);
650  pLayout->setRowStretch(6, 999);
651
652  pgroup->setLayout(pLayout);
653
654  // General Tab
655  // -----------
656  QGridLayout* gLayout = new QGridLayout;
657  gLayout->setColumnMinimumWidth(0,14*ww);
658  _onTheFlyComboBox->setMaximumWidth(9*ww);
659
660  gLayout->addWidget(new QLabel("General settings for logfile, file handling, configuration on-the-fly, auto-start, and raw file output.<br>"),0, 0, 1, 50);
661  gLayout->addWidget(new QLabel("Logfile (full path)"),          1, 0);
662  gLayout->addWidget(_logFileLineEdit,                           1, 1, 1,20);
663  gLayout->addWidget(new QLabel("Append files"),                 2, 0);
664  gLayout->addWidget(_rnxAppendCheckBox,                         2, 1);
665  gLayout->addWidget(new QLabel("Reread configuration"),         3, 0);
666  gLayout->addWidget(_onTheFlyComboBox,                          3, 1);
667  gLayout->addWidget(new QLabel("Auto start"),                   4, 0);
668  gLayout->addWidget(_autoStartCheckBox,                         4, 1);
669  gLayout->addWidget(new QLabel("Raw output file (full path)"),  5, 0);
670  gLayout->addWidget(_rawOutFileLineEdit,                        5, 1, 1,20);
671  gLayout->addWidget(new QLabel(""),                             6, 1);
672  gLayout->setRowStretch(7, 999);
673
674  ggroup->setLayout(gLayout);
675
676  // RINEX Observations
677  // ------------------
678  QGridLayout* oLayout = new QGridLayout;
679  oLayout->setColumnMinimumWidth(0,14*ww);
680  _rnxIntrComboBox->setMaximumWidth(9*ww);
681  _rnxSamplSpinBox->setMaximumWidth(9*ww);
682
683  _rnxV2Priority->setMaximumWidth(19*ww);
684
685  oLayout->addWidget(new QLabel("Saving RINEX observation files.<br>"),0, 0, 1,50);
686  oLayout->addWidget(new QLabel("Directory"),                      1, 0);
687  oLayout->addWidget(_rnxPathLineEdit,                             1, 1, 1, 15);
688  oLayout->addWidget(new QLabel("Interval"),                       2, 0);
689  oLayout->addWidget(_rnxIntrComboBox,                             2, 1);
690  oLayout->addWidget(new QLabel("  Sampling"),                     2, 2, Qt::AlignRight);
691  oLayout->addWidget(_rnxSamplSpinBox,                             2, 3, Qt::AlignLeft);
692  oLayout->addWidget(new QLabel("Skeleton extension"),             3, 0);
693  oLayout->addWidget(_rnxSkelLineEdit,                             3, 1, Qt::AlignLeft);
694  oLayout->addWidget(new QLabel("Skeleton mandatory"),             3, 2);
695  oLayout->addWidget(_rnxFileCheckBox,                             3, 3);
696  oLayout->addWidget(new QLabel("Script (full path)"),             4, 0);
697  oLayout->addWidget(_rnxScrpLineEdit,                             4, 1, 1, 15);
698  oLayout->addWidget(new QLabel("Version 2"),                      5, 0);
699  oLayout->addWidget(_rnxV2Priority,                               5, 1);
700  oLayout->addWidget(new QLabel("Signal priority"),                5, 2);
701  oLayout->addWidget(new QLabel("Version 3"),                      6, 0);
702  oLayout->addWidget(_rnxV3CheckBox,                               6, 1);
703  oLayout->addWidget(new QLabel("Version 3 filenames"),            6, 2);
704  oLayout->addWidget(_rnxV3filenameCheckBox,                       6, 3);
705  oLayout->addWidget(new QLabel(""),                               7, 1);
706  oLayout->setRowStretch(8, 999);
707
708  ogroup->setLayout(oLayout);
709
710  // RINEX Ephemeris
711  // ---------------
712  QGridLayout* eLayout = new QGridLayout;
713  eLayout->setColumnMinimumWidth(0,14*ww);
714  _ephIntrComboBox->setMaximumWidth(9*ww);
715  _ephOutPortLineEdit->setMaximumWidth(9*ww);
716
717  eLayout->addWidget(new QLabel("Saving RINEX navigation files and ephemeris output through IP port.<br>"),0,0,1,70);
718  eLayout->addWidget(new QLabel("Directory"),                     1, 0);
719  eLayout->addWidget(_ephPathLineEdit,                            1, 1, 1,30);
720  eLayout->addWidget(new QLabel("Interval"),                      2, 0);
721  eLayout->addWidget(_ephIntrComboBox,                            2, 1);
722  eLayout->addWidget(new QLabel("Port"),                          3, 0);
723  eLayout->addWidget(_ephOutPortLineEdit,                         3, 1);
724  eLayout->addWidget(new QLabel("Version 3"),                     4, 0);
725  eLayout->addWidget(_ephV3CheckBox,                              4, 1);
726  eLayout->addWidget(new QLabel("Version 3 filenames"),           4, 2);
727  eLayout->addWidget(_ephV3filenameCheckBox,                      4, 3);
728  eLayout->setRowStretch(5, 999);
729
730  egroup->setLayout(eLayout);
731
732
733  // Broadcast Corrections
734  // ---------------------
735  QGridLayout* cLayout = new QGridLayout;
736  cLayout->setColumnMinimumWidth(0,14*ww);
737  _corrIntrComboBox->setMaximumWidth(9*ww);
738  _corrPortLineEdit->setMaximumWidth(9*ww);
739
740  cLayout->addWidget(new QLabel("Saving Broadcast Ephemeris correction files and correction output through IP port.<br>"),0,0,1,70);
741  cLayout->addWidget(new QLabel("Directory, ASCII"),              1, 0);
742  cLayout->addWidget(_corrPathLineEdit,                           1, 1, 1,30);
743  cLayout->addWidget(new QLabel("Interval"),                      2, 0);
744  cLayout->addWidget(_corrIntrComboBox,                           2, 1);
745  cLayout->addWidget(new QLabel("Port"),                          3, 0);
746  cLayout->addWidget(_corrPortLineEdit,                           3, 1);
747  cLayout->addWidget(new QLabel(""),                              4, 1);
748  cLayout->setRowStretch(7, 999);
749  cgroup->setLayout(cLayout);
750
751  // Feed Engine
752  // -----------
753  QGridLayout* sLayout = new QGridLayout;
754  sLayout->setColumnMinimumWidth(0,14*ww);
755  _outPortLineEdit->setMaximumWidth(9*ww);
756  _outWaitSpinBox->setMaximumWidth(9*ww);
757  _outSamplSpinBox->setMaximumWidth(9*ww);
758  _outUPortLineEdit->setMaximumWidth(9*ww);
759
760  sLayout->addWidget(new QLabel("Output decoded observations in ASCII format to feed a real-time GNSS network engine.<br>"),0,0,1,50);
761  sLayout->addWidget(new QLabel("Port"),                            1, 0);
762  sLayout->addWidget(_outPortLineEdit,                              1, 1);
763  sLayout->addWidget(new QLabel("       Wait for full obs epoch"),  1, 2, Qt::AlignRight);
764  sLayout->addWidget(_outWaitSpinBox,                              1, 3, Qt::AlignLeft);
765  sLayout->addWidget(new QLabel("Sampling"),                        2, 0);
766  sLayout->addWidget(_outSamplSpinBox,                              2, 1, Qt::AlignLeft);
767  sLayout->addWidget(new QLabel("File (full path)"),                3, 0);
768  sLayout->addWidget(_outFileLineEdit,                              3, 1, 1, 10);
769  sLayout->addWidget(new QLabel("Port (unsynchronized)"),           4, 0);
770  sLayout->addWidget(_outUPortLineEdit,                             4, 1);
771  sLayout->addWidget(new QLabel(""),                                5, 1);
772  sLayout->setRowStretch(6, 999);
773
774  sgroup->setLayout(sLayout);
775
776  // Serial Output
777  // -------------
778  QGridLayout* serLayout = new QGridLayout;
779  serLayout->setColumnMinimumWidth(0,12*ww);
780  _serialBaudRateComboBox->setMaximumWidth(9*ww);
781  _serialFlowControlComboBox->setMaximumWidth(11*ww);
782  _serialDataBitsComboBox->setMaximumWidth(5*ww);
783  _serialParityComboBox->setMaximumWidth(9*ww);
784  _serialStopBitsComboBox->setMaximumWidth(5*ww);
785  _serialAutoNMEAComboBox->setMaximumWidth(14*ww);
786  _serialHeightNMEALineEdit->setMaximumWidth(8*ww);
787  _serialManualNMEASamplingSpinBox->setMaximumWidth(8*ww);
788
789  serLayout->addWidget(new QLabel("Port settings to feed a serial connected receiver.<br>"),0,0,1,30);
790  serLayout->addWidget(new QLabel("Mountpoint"),                  1, 0, Qt::AlignLeft);
791  serLayout->addWidget(_serialMountPointLineEdit,                 1, 1, 1, 2);
792  serLayout->addWidget(new QLabel("Port name"),                   2, 0, Qt::AlignLeft);
793  serLayout->addWidget(_serialPortNameLineEdit,                   2, 1, 1, 2);
794  serLayout->addWidget(new QLabel("Baud rate"),                   3, 0, Qt::AlignLeft);
795  serLayout->addWidget(_serialBaudRateComboBox,                   3, 1);
796  serLayout->addWidget(new QLabel("Flow control"),                3, 2, Qt::AlignRight);
797  serLayout->addWidget(_serialFlowControlComboBox,                3, 3);
798  serLayout->addWidget(new QLabel("Data bits"),                   4, 0, Qt::AlignLeft);
799  serLayout->addWidget(_serialDataBitsComboBox,                   4, 1);
800  serLayout->addWidget(new QLabel("Parity"),                      4, 2, Qt::AlignRight);
801  serLayout->addWidget(_serialParityComboBox,                     4, 3);
802  serLayout->addWidget(new QLabel("   Stop bits"),                4, 4, Qt::AlignRight);
803  serLayout->addWidget(_serialStopBitsComboBox,                   4, 5);
804  serLayout->addWidget(new QLabel("NMEA"),                        5, 0);
805  serLayout->addWidget(_serialAutoNMEAComboBox,                   5, 1);
806  serLayout->addWidget(new QLabel("    File (full path)"),        5, 2, Qt::AlignRight);
807  serLayout->addWidget(_serialFileNMEALineEdit,                   5, 3, 1,10);
808  serLayout->addWidget(new QLabel("Height"),                      5,14, Qt::AlignRight);
809  serLayout->addWidget(_serialHeightNMEALineEdit,                 5,15, 1,11);
810  serLayout->addWidget(new QLabel("Sampling"),                    5,25, Qt::AlignRight);
811  serLayout->addWidget(_serialManualNMEASamplingSpinBox,          5,26, 1,12);
812  serLayout->addWidget(new QLabel(""),                            6, 1);
813  serLayout->setRowStretch(7, 999);
814
815  sergroup->setLayout(serLayout);
816
817  // Outages
818  // -------
819  QGridLayout* aLayout = new QGridLayout;
820  aLayout->setColumnMinimumWidth(0,14*ww);
821  _adviseObsRateComboBox->setMaximumWidth(9*ww);
822  _adviseFailSpinBox->setMaximumWidth(9*ww);
823  _adviseRecoSpinBox->setMaximumWidth(9*ww);
824
825  aLayout->addWidget(new QLabel("Failure and recovery reports, advisory notes.<br>"),0,0,1,50,Qt::AlignLeft);
826  aLayout->addWidget(new QLabel("Observation rate"),              1, 0);
827  aLayout->addWidget(_adviseObsRateComboBox,                      1, 1);
828  aLayout->addWidget(new QLabel("Failure threshold"),             2, 0);
829  aLayout->addWidget(_adviseFailSpinBox,                          2, 1);
830  aLayout->addWidget(new QLabel("Recovery threshold"),            3, 0);
831  aLayout->addWidget(_adviseRecoSpinBox,                          3, 1);
832  aLayout->addWidget(new QLabel("Script (full path)"),            4, 0);
833  aLayout->addWidget(_adviseScriptLineEdit,                       4, 1, 1,20);
834  aLayout->addWidget(new QLabel(""),                              5, 1);
835  aLayout->setRowStretch(6, 999);
836
837  agroup->setLayout(aLayout);
838
839  // Miscellaneous
840  // -------------
841  QGridLayout* rLayout = new QGridLayout;
842  rLayout->setColumnMinimumWidth(0,14*ww);
843  _miscIntrComboBox->setMaximumWidth(9*ww);
844  _miscPortLineEdit->setMaximumWidth(9*ww);
845
846  rLayout->addWidget(new QLabel("Log latencies or scan RTCM streams for message types and antenna information or output raw data through TCP/IP port.<br>"),0, 0,1,50);
847  rLayout->addWidget(new QLabel("Mountpoint"),                    1, 0);
848  rLayout->addWidget(_miscMountLineEdit,                          1, 1, 1, 7);
849  rLayout->addWidget(new QLabel("Log latency"),                   2, 0);
850  rLayout->addWidget(_miscIntrComboBox,                           2, 1);
851  rLayout->addWidget(new QLabel("Scan RTCM"),                     3, 0);
852  rLayout->addWidget(_miscScanRTCMCheckBox,                       3, 1);
853  rLayout->addWidget(new QLabel("Port"),                          4, 0);
854  rLayout->addWidget(_miscPortLineEdit,                           4, 1);
855  rLayout->addWidget(new QLabel(""),                              5, 1);
856  rLayout->setRowStretch(6, 999);
857
858  rgroup->setLayout(rLayout);
859
860  // PPP
861  // ---
862  _pppWidgets._dataSource->setMaximumWidth(20*ww);
863  _pppWidgets._corrMount->setMaximumWidth(20*ww);
864
865  _pppWidgets._corrFile->setMaximumWidth(35*ww);
866  _pppWidgets._crdFile->setMaximumWidth(35*ww);
867  _pppWidgets._logPath->setMaximumWidth(35*ww);
868  _pppWidgets._snxtroPath->setMaximumWidth(35*ww);
869  _pppWidgets._snxtroIntr->setMaximumWidth(10*ww);
870  _pppWidgets._snxtroAc  ->setMaximumWidth(10*ww);
871  _pppWidgets._snxtroSol ->setMaximumWidth(7*ww);
872
873  QGridLayout* pppLayout1 = new QGridLayout();
874  int ir = 0;
875  pppLayout1->addWidget(new QLabel("Precise Point Positioning - Input and Output."), ir, 0, 1, 7, Qt::AlignLeft);
876  ++ir;
877  pppLayout1->addWidget(new QLabel("Data source"),           ir, 0);
878  pppLayout1->addWidget(_pppWidgets._dataSource,             ir, 1);
879  pppLayout1->addWidget(new QLabel("   RINEX Obs file"),     ir, 3);
880  pppLayout1->addWidget(_pppWidgets._rinexObs,               ir, 4, 1, 3);
881  ++ir;
882  pppLayout1->addWidget(new QLabel("Corrections stream"),    ir, 0);
883  pppLayout1->addWidget(_pppWidgets._corrMount,              ir, 1);
884  pppLayout1->addWidget(new QLabel("   RINEX Nav file"),     ir, 3);
885  pppLayout1->addWidget(_pppWidgets._rinexNav,               ir, 4, 1, 3);
886  ++ir;
887  pppLayout1->addWidget(new QLabel("Corrections file"),      ir, 0);
888  pppLayout1->addWidget(_pppWidgets._corrFile,               ir, 1);
889  pppLayout1->addWidget(new QLabel("   ANTEX file"),         ir, 3);
890  pppLayout1->addWidget(_pppWidgets._antexFile,              ir, 4, 1, 3);
891  ++ir;
892  pppLayout1->addWidget(new QLabel("Coordinates file"),      ir, 0);
893  pppLayout1->addWidget(_pppWidgets._crdFile,                ir, 1);
894  pppLayout1->addWidget(new QLabel("   Version 3 filenames"),ir, 3);
895  pppLayout1->addWidget(_pppWidgets._v3filenames,            ir, 4, 1, 3);
896  ++ir;
897  pppLayout1->addWidget(new QLabel("Logfile directory"),     ir, 0);
898  pppLayout1->addWidget(_pppWidgets._logPath,                ir, 1);
899  pppLayout1->addWidget(new QLabel("   NMEA directory"),     ir, 3);
900  pppLayout1->addWidget(_pppWidgets._nmeaPath,               ir, 4, 1, 3);
901  ++ir;
902  pppLayout1->addWidget(new QLabel("SNX TRO directory"),     ir, 0);
903  pppLayout1->addWidget(_pppWidgets._snxtroPath,             ir, 1);
904  pppLayout1->addWidget(new QLabel("   SNX TRO interval"),   ir, 3);
905  pppLayout1->addWidget(_pppWidgets._snxtroIntr,             ir, 4);
906  pppLayout1->addWidget(new QLabel("   SNX TRO sampling"),   ir, 5);
907  pppLayout1->addWidget(_pppWidgets._snxtroSampl,            ir, 6, Qt::AlignRight);
908  ++ir;
909  pppLayout1->addWidget(new QLabel("   SNX TRO AC"),         ir, 3);
910  pppLayout1->addWidget(_pppWidgets._snxtroAc,               ir, 4);
911  pppLayout1->addWidget(new QLabel("   SNX TRO solution")    ,ir, 5);
912  pppLayout1->addWidget(_pppWidgets._snxtroSol,              ir, 6, Qt::AlignRight);
913  pppLayout1->setRowStretch(ir, 999);
914
915  pppGroup1->setLayout(pppLayout1);
916
917  QVBoxLayout* pppLayout2 = new QVBoxLayout();
918  pppLayout2->addWidget(new QLabel("Precise Point Positioning - Processed Stations.<br>"));
919  pppLayout2->addWidget(_pppWidgets._staTable, 99);
920  QHBoxLayout* pppLayout2sub = new QHBoxLayout();
921  pppLayout2sub->addWidget(_pppWidgets._addStaButton);
922  pppLayout2sub->addWidget(_pppWidgets._delStaButton);
923  pppLayout2sub->addStretch(99);
924
925  pppLayout2->addLayout(pppLayout2sub);
926
927  pppGroup2->setLayout(pppLayout2);
928
929  QGridLayout* pppLayout3 = new QGridLayout();
930  ir = 0;
931  pppLayout3->addWidget(new QLabel("Precise Point Positioning - Options.<br>"), ir, 0, 1, 2, Qt::AlignLeft);
932  ++ir;
933  pppLayout3->addWidget(new QLabel("GPS LCs"),              ir, 0, Qt::AlignLeft);
934  pppLayout3->addWidget(_pppWidgets._lcGPS,                 ir, 1);
935  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 2);
936  pppLayout3->addWidget(new QLabel("Sigma C1"),             ir, 3, Qt::AlignLeft);
937  pppLayout3->addWidget(_pppWidgets._sigmaC1,               ir, 4); _pppWidgets._sigmaC1->setMaximumWidth(8*ww);
938  pppLayout3->addItem(new QSpacerItem(8*ww, 0),             ir, 5);
939  pppLayout3->addWidget(new QLabel("Sigma L1"),             ir, 6, Qt::AlignLeft);
940  pppLayout3->addWidget(_pppWidgets._sigmaL1,               ir, 7); _pppWidgets._sigmaL1->setMaximumWidth(8*ww);
941  ++ir;
942  pppLayout3->addWidget(new QLabel("GLONASS LCs"),          ir, 0, Qt::AlignLeft);
943  pppLayout3->addWidget(_pppWidgets._lcGLONASS,             ir, 1);
944  pppLayout3->addWidget(new QLabel("Max Res C1"),           ir, 3, Qt::AlignLeft);
945  pppLayout3->addWidget(_pppWidgets._maxResC1,              ir, 4); _pppWidgets._maxResC1->setMaximumWidth(8*ww);
946  pppLayout3->addWidget(new QLabel("Max Res L1"),           ir, 6, Qt::AlignLeft);
947  pppLayout3->addWidget(_pppWidgets._maxResL1,              ir, 7); _pppWidgets._maxResL1->setMaximumWidth(8*ww);
948  ++ir;
949  pppLayout3->addWidget(new QLabel("Galileo LCs"),          ir, 0, Qt::AlignLeft);
950  pppLayout3->addWidget(_pppWidgets._lcGalileo,             ir, 1);
951  pppLayout3->addWidget(new QLabel("Ele Wgt Code"),         ir, 3, Qt::AlignLeft);
952  pppLayout3->addWidget(_pppWidgets._eleWgtCode,            ir, 4);
953  pppLayout3->addWidget(new QLabel("Ele Wgt Phase"),        ir, 6, Qt::AlignLeft);
954  pppLayout3->addWidget(_pppWidgets._eleWgtPhase,           ir, 7);
955  ++ir;
956  pppLayout3->addWidget(new QLabel("BDS LCs"),              ir, 0, Qt::AlignLeft);
957  pppLayout3->addWidget(_pppWidgets._lcBDS,                 ir, 1);
958  pppLayout3->addWidget(new QLabel("Min # of Obs"),         ir, 3, Qt::AlignLeft);
959  pppLayout3->addWidget(_pppWidgets._minObs,                ir, 4);
960  pppLayout3->addWidget(new QLabel("Min Elevation"),        ir, 6, Qt::AlignLeft);
961  pppLayout3->addWidget(_pppWidgets._minEle,                ir, 7);
962  ++ir;
963  pppLayout3->addWidget(new QLabel("Wait for clock corr."), ir, 0, Qt::AlignLeft);
964  pppLayout3->addWidget(_pppWidgets._corrWaitTime,          ir, 1);
965  pppLayout3->addWidget(new QLabel("Seeding (sec)"),        ir, 3, Qt::AlignLeft);
966  pppLayout3->addWidget(_pppWidgets._seedingTime,           ir, 4);
967  ++ir;
968  pppLayout3->addWidget(new QLabel(""),                     ir, 8);
969  pppLayout3->setColumnStretch(8, 999);
970  ++ir;
971  pppLayout3->addWidget(new QLabel(""),                      ir, 1);
972  pppLayout3->setRowStretch(ir, 999);
973
974  pppGroup3->setLayout(pppLayout3);
975
976  // ------------------------
977  connect(_pppWidgets._mapWinButton, SIGNAL(clicked()), SLOT(slotMapPPP()));
978  _pppWidgets._mapSpeedSlider->setMinimumWidth(33*ww);
979  _pppWidgets._audioResponse->setMaximumWidth(8*ww);
980
981  QGridLayout* pppLayout4 = new QGridLayout();
982  ir = 0;
983  pppLayout4->addWidget(new QLabel("Precise Point Positioning - Plots.<br>"), ir, 0, 1, 50, Qt::AlignLeft);
984  ++ir;
985  pppLayout4->addWidget(new QLabel("PPP Plot"),                          ir, 0, Qt::AlignLeft);
986  pppLayout4->addWidget(_pppWidgets._plotCoordinates,                    ir, 1, Qt::AlignLeft);
987  pppLayout4->addWidget(new QLabel("Mountpoint"),                        ir, 2, 1, 10, Qt::AlignLeft);
988  pppLayout4->addWidget(_pppWidgets._audioResponse,                      ir, 4, Qt::AlignLeft);
989  pppLayout4->addWidget(new QLabel("Audio response"),                    ir, 5, Qt::AlignRight);
990
991  ++ir;
992  pppLayout4->addWidget(new QLabel("Track map"),                         ir, 0, Qt::AlignLeft);
993  pppLayout4->addWidget(_pppWidgets._mapWinButton,                       ir, 1, Qt::AlignLeft);
994  pppLayout4->addWidget(new QLabel("OSM"),                               ir, 2, Qt::AlignLeft);
995  pppLayout4->addWidget(_pppWidgets._useOpenStreetMap,                   ir, 3, Qt::AlignLeft);
996  pppLayout4->addWidget(new QLabel("Google"),                            ir, 3, Qt::AlignRight);
997  pppLayout4->addWidget(_pppWidgets._useGoogleMap,                       ir, 4, Qt::AlignLeft);
998  ++ir;
999  pppLayout4->addWidget(new QLabel("Dot-properties"),                    ir, 0, Qt::AlignLeft);
1000  pppLayout4->addWidget(_pppWidgets._mapWinDotSize,                      ir, 1, Qt::AlignLeft);
1001  pppLayout4->addWidget(new QLabel("Size    "),                          ir, 2, Qt::AlignLeft);
1002  pppLayout4->addWidget(_pppWidgets._mapWinDotColor,                     ir, 3, Qt::AlignLeft);
1003  pppLayout4->addWidget(new QLabel("Color"),                             ir, 4, Qt::AlignLeft);
1004  ++ir;
1005  pppLayout4->addWidget(new QLabel("Post-processing speed"),             ir, 0, Qt::AlignLeft);
1006  pppLayout4->addWidget(_pppWidgets._mapSpeedSlider,                     ir, 1, 1, 20, Qt::AlignLeft);
1007  ++ir;
1008  pppLayout4->addWidget(new QLabel(""),                                  ir, 1);
1009  pppLayout4->setRowStretch(ir, 999);
1010
1011  pppGroup4->setLayout(pppLayout4);
1012
1013  // Reqc Processing
1014  // ---------------
1015  _reqcActionComboBox = new QComboBox();
1016  _reqcActionComboBox->setEditable(false);
1017  _reqcActionComboBox->addItems(QString(",Edit/Concatenate,Analyze").split(","));
1018  int ik = _reqcActionComboBox->findText(settings.value("reqcAction").toString());
1019  if (ik != -1) {
1020    _reqcActionComboBox->setCurrentIndex(ik);
1021  }
1022  connect(_reqcActionComboBox, SIGNAL(currentIndexChanged(const QString &)),
1023          this, SLOT(slotBncTextChanged()));
1024
1025  QGridLayout* reqcLayout = new QGridLayout;
1026  _reqcActionComboBox->setMinimumWidth(15*ww);
1027  _reqcActionComboBox->setMaximumWidth(20*ww);
1028
1029  _reqcObsFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1030  _reqcObsFileChooser->setFileName(settings.value("reqcObsFile").toString());
1031
1032  _reqcNavFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1033  _reqcNavFileChooser->setFileName(settings.value("reqcNavFile").toString());
1034  _reqcOutObsLineEdit = new QLineEdit(settings.value("reqcOutObsFile").toString());
1035  _reqcOutNavLineEdit = new QLineEdit(settings.value("reqcOutNavFile").toString());
1036  _reqcOutLogLineEdit = new QLineEdit(settings.value("reqcOutLogFile").toString());
1037  _reqcPlotDirLineEdit = new QLineEdit(settings.value("reqcPlotDir").toString());
1038  _reqcSkyPlotSignals = new QLineEdit(settings.value("reqcSkyPlotSignals").toString());
1039
1040  connect(_reqcSkyPlotSignals, SIGNAL(textChanged(const QString &)),
1041          this, SLOT(slotBncTextChanged()));
1042
1043  _reqcLogSummaryOnly = new QCheckBox();
1044  _reqcLogSummaryOnly->setCheckState(Qt::CheckState(settings.value("reqcLogSummaryOnly").toInt()));
1045
1046  ir = 0;
1047  reqcLayout->addWidget(new QLabel("RINEX file editing, concatenation and quality check.<br>"),ir, 0, 1, 8);
1048  ++ir;
1049  reqcLayout->addWidget(new QLabel("Action"),                    ir, 0);
1050  reqcLayout->addWidget(_reqcActionComboBox,                     ir, 1);
1051  _reqcEditOptionButton = new QPushButton("Set Edit Options");
1052  _reqcEditOptionButton->setMinimumWidth(15*ww);
1053  _reqcEditOptionButton->setMaximumWidth(20*ww);
1054
1055  reqcLayout->addWidget(_reqcEditOptionButton,                   ir, 3);
1056  ++ir;
1057  reqcLayout->addWidget(new QLabel("Input files (full path)"),   ir, 0);
1058  reqcLayout->addWidget(_reqcObsFileChooser,                     ir, 1);
1059  _reqcObsFileChooser->setMaximumWidth(40*ww);
1060  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1061  reqcLayout->addWidget(_reqcNavFileChooser,                     ir, 3);
1062  _reqcNavFileChooser->setMaximumWidth(40*ww);
1063  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1064  ++ir;
1065  reqcLayout->addWidget(new QLabel("Output file (full path)"),   ir, 0);
1066  reqcLayout->addWidget(_reqcOutObsLineEdit,                     ir, 1);
1067  _reqcOutObsLineEdit->setMaximumWidth(40*ww);
1068  reqcLayout->addWidget(new QLabel("  Obs"),                     ir, 2);
1069  reqcLayout->addWidget(_reqcOutNavLineEdit,                     ir, 3);
1070  _reqcOutNavLineEdit->setMaximumWidth(40*ww);
1071  reqcLayout->addWidget(new QLabel("  Nav"),                     ir, 4);
1072  ++ir;
1073  reqcLayout->addWidget(new QLabel("Logfile"),                   ir, 0);
1074  reqcLayout->addWidget(_reqcOutLogLineEdit,                     ir, 1);
1075  _reqcOutLogLineEdit->setMaximumWidth(40*ww);
1076  reqcLayout->addWidget(new QLabel("  Summary only"),            ir, 2);
1077  reqcLayout->addWidget(_reqcLogSummaryOnly,                     ir, 3);
1078  ++ir;
1079  reqcLayout->addWidget(new QLabel("Plots for signals"),         ir, 0);
1080  reqcLayout->addWidget(_reqcSkyPlotSignals,                     ir, 1);
1081  _reqcSkyPlotSignals->setMaximumWidth(40*ww);
1082  ++ir;
1083  reqcLayout->addWidget(new QLabel("Directory for plots"),       ir, 0);
1084  reqcLayout->addWidget(_reqcPlotDirLineEdit,                    ir, 1);
1085  _reqcPlotDirLineEdit->setMaximumWidth(40*ww);
1086  ++ir;
1087  reqcLayout->setRowStretch(ir, 999);
1088
1089  reqcLayout->setColumnMinimumWidth(2, 8*ww);
1090  reqcLayout->setColumnMinimumWidth(4, 8*ww);
1091
1092  reqcgroup->setLayout(reqcLayout);
1093
1094  connect(_reqcEditOptionButton, SIGNAL(clicked()),
1095          this, SLOT(slotReqcEditOption()));
1096
1097  QGridLayout* sp3CompLayout = new QGridLayout;
1098
1099  _sp3CompFileChooser = new qtFileChooser(0, qtFileChooser::Files);
1100  _sp3CompFileChooser->setFileName(settings.value("sp3CompFile").toString());
1101  _sp3CompFileChooser->setMinimumWidth(15*ww);
1102  _sp3CompFileChooser->setMaximumWidth(40*ww);
1103
1104  _sp3CompExclude = new QLineEdit(settings.value("sp3CompExclude").toString());
1105  _sp3CompExclude->setMinimumWidth(18*ww);
1106  _sp3CompExclude->setMaximumWidth(18*ww);
1107
1108  _sp3CompLogLineEdit = new QLineEdit(settings.value("sp3CompOutLogFile").toString());
1109  _sp3CompLogLineEdit->setMinimumWidth(18*ww);
1110  _sp3CompLogLineEdit->setMaximumWidth(18*ww);
1111
1112  ir = 0;
1113  sp3CompLayout->addWidget(new QLabel("Orbit and clock comparison.<br>"),  ir, 0, 1, 40);
1114  ++ir;
1115  sp3CompLayout->addWidget(new QLabel("Input SP3 files (full path)"),  ir, 0, Qt::AlignLeft);
1116  sp3CompLayout->addWidget(_sp3CompFileChooser,                        ir, 1, 1, 20);
1117  ++ir;
1118  sp3CompLayout->addWidget(new QLabel("Exclude satellites"),           ir, 0, Qt::AlignLeft);
1119  sp3CompLayout->addWidget(_sp3CompExclude,                            ir, 1, Qt::AlignRight);
1120  ++ir;
1121  sp3CompLayout->addWidget(new QLabel("Logfile"),                      ir, 0, Qt::AlignLeft);
1122  sp3CompLayout->addWidget(_sp3CompLogLineEdit,                        ir, 1, Qt::AlignRight);
1123  ++ir;
1124  sp3CompLayout->addWidget(new QLabel(""),                             ir, 1);
1125  ++ir;
1126  sp3CompLayout->setRowStretch(ir, 999);
1127
1128  sp3CompLayout->setColumnMinimumWidth(2, 8*ww);
1129  sp3CompLayout->setColumnMinimumWidth(4, 8*ww);
1130
1131  sp3CompGroup->setLayout(sp3CompLayout);
1132
1133  connect(_sp3CompFileChooser, SIGNAL(fileNameChanged(const QString &)),
1134          this, SLOT(slotBncTextChanged()));
1135
1136  // Combine Corrections
1137  // -------------------
1138  QGridLayout* cmbLayout = new QGridLayout;
1139
1140  populateCmbTable();
1141  cmbLayout->addWidget(_cmbTable,                                            0, 0, 8, 3);
1142  cmbLayout->addWidget(new QLabel(" Combine Broadcast Correction streams.<br>"), 1, 6, 1, 10);
1143  cmbLayout->addWidget(addCmbRowButton,                                      2, 6);
1144  cmbLayout->addWidget(delCmbRowButton,                                      2, 7);
1145  cmbLayout->addWidget(new QLabel("Method"),                                 3, 6, Qt::AlignRight);
1146  cmbLayout->addWidget(_cmbMethodComboBox,                                   3, 7);
1147  cmbLayout->addWidget(new QLabel(" Maximal residuum"),                      4, 6, Qt::AlignRight);
1148  cmbLayout->addWidget(_cmbMaxresLineEdit,                                   4, 7, Qt::AlignRight);
1149  cmbLayout->addWidget(new QLabel("Sampling"),                               5, 6, Qt::AlignRight);
1150  cmbLayout->addWidget(_cmbSamplSpinBox,                                     5, 7);
1151  cmbLayout->addWidget(new QLabel("   Use GLONASS"),                         6, 6, Qt::AlignRight);
1152  cmbLayout->addWidget(_cmbUseGlonass,                                       6, 7);
1153  cmbLayout->setRowStretch(7, 999);
1154
1155  connect(addCmbRowButton, SIGNAL(clicked()), this, SLOT(slotAddCmbRow()));
1156  connect(delCmbRowButton, SIGNAL(clicked()), this, SLOT(slotDelCmbRow()));
1157
1158  cmbgroup->setLayout(cmbLayout);
1159
1160  // Upload Layout (Clocks)
1161  // ----------------------
1162  QGridLayout* uploadHlpLayout = new QGridLayout();
1163
1164  connect(addUploadRowButton, SIGNAL(clicked()), this, SLOT(slotAddUploadRow()));
1165  connect(delUploadRowButton, SIGNAL(clicked()), this, SLOT(slotDelUploadRow()));
1166  connect(setUploadTrafoButton, SIGNAL(clicked()), this, SLOT(slotSetUploadTrafo()));
1167
1168  uploadHlpLayout->addWidget(addUploadRowButton,                  0, 0);
1169  uploadHlpLayout->addWidget(delUploadRowButton,                  0, 1);
1170  uploadHlpLayout->addWidget(new QLabel("Interval"),              0, 2, Qt::AlignRight);
1171  uploadHlpLayout->addWidget(_uploadIntrComboBox,                 0, 3);
1172  uploadHlpLayout->addWidget(new QLabel("     Sampling:    Orb"), 0, 4, Qt::AlignRight);
1173  uploadHlpLayout->addWidget(_uploadSamplRtcmEphCorrSpinBox,      0, 5);
1174  uploadHlpLayout->addWidget(new QLabel("SP3"),                   0, 6, Qt::AlignRight);
1175  uploadHlpLayout->addWidget(_uploadSamplSp3SpinBox,              0, 7);
1176  uploadHlpLayout->addWidget(new QLabel("RNX"),                   0, 8, Qt::AlignRight);
1177  uploadHlpLayout->addWidget(_uploadSamplClkRnxSpinBox,           0, 9);
1178  uploadHlpLayout->addWidget(setUploadTrafoButton,                0,10);
1179  uploadHlpLayout->addWidget(new QLabel("ANTEX file"),            1, 0, Qt::AlignLeft);
1180  uploadHlpLayout->addWidget(_uploadAntexFile,                    1, 1, 1, 4);
1181
1182  QBoxLayout* uploadLayout = new QBoxLayout(QBoxLayout::TopToBottom);
1183  populateUploadTable();
1184
1185  uploadLayout->addWidget(new QLabel("Upload RTCM Version 3 Broadcast Corrections to caster.<br>"));
1186  uploadLayout->addWidget(_uploadTable);
1187  uploadLayout->addLayout(uploadHlpLayout);
1188
1189  uploadgroup->setLayout(uploadLayout);
1190
1191  // Upload Layout (Ephemeris)
1192  // -------------------------
1193  QGridLayout* uploadLayoutEph = new QGridLayout;
1194
1195  uploadLayoutEph->setColumnMinimumWidth(0, 9*ww);
1196  _uploadEphPortLineEdit->setMaximumWidth(9*ww);
1197  _uploadEphPasswordLineEdit->setMaximumWidth(9*ww);
1198  _uploadEphMountpointLineEdit->setMaximumWidth(12*ww);
1199
1200  uploadLayoutEph->addWidget(new QLabel("Upload concatenated RTCMv3 Broadcast Ephemeris to caster.<br>"), 0, 0, 1, 50);
1201  uploadLayoutEph->addWidget(new QLabel("Host"),                  1, 0);
1202  uploadLayoutEph->addWidget(_uploadEphHostLineEdit,              1, 1, 1, 3);
1203  uploadLayoutEph->addWidget(new QLabel("  Port"),                1, 4, Qt::AlignRight);
1204  uploadLayoutEph->addWidget(_uploadEphPortLineEdit,              1, 5, 1, 1);
1205  uploadLayoutEph->addWidget(new QLabel("Mountpoint           "), 2, 0);
1206  uploadLayoutEph->addWidget(_uploadEphMountpointLineEdit,        2, 1);
1207  uploadLayoutEph->addWidget(new QLabel("          Password"),    2, 2, Qt::AlignRight);
1208  uploadLayoutEph->addWidget(_uploadEphPasswordLineEdit,          2, 3);
1209  uploadLayoutEph->addWidget(new QLabel("Sampling"),              3, 0);
1210  uploadLayoutEph->addWidget(_uploadEphSampleSpinBox,             3, 1);
1211  uploadLayoutEph->addWidget(new QLabel("Uploaded"),              4, 0);
1212  uploadLayoutEph->addWidget(_uploadEphBytesCounter,              4, 1);
1213  uploadLayoutEph->setRowStretch(5, 999);
1214
1215  uploadEphgroup->setLayout(uploadLayoutEph);
1216
1217  connect(_uploadEphHostLineEdit, SIGNAL(textChanged(const QString &)),
1218          this, SLOT(slotBncTextChanged()));
1219
1220  // Main Layout
1221  // -----------
1222  QGridLayout* mLayout = new QGridLayout;
1223  _aogroup->setCurrentIndex(settings.value("startTab").toInt());
1224  mLayout->addWidget(_aogroup,            0,0);
1225  mLayout->addWidget(_mountPointsTable,   1,0);
1226  _loggroup->setCurrentIndex(settings.value("statusTab").toInt());
1227  mLayout->addWidget(_loggroup,           2,0);
1228
1229  _canvas->setLayout(mLayout);
1230
1231  // WhatsThis, Network
1232  // ------------------
1233  _proxyHostLineEdit->setWhatsThis(tr("<p>If you are running BNC within a protected Local Area Network (LAN), you may need to use a proxy server to access the Internet. Enter your proxy server IP and port number in case one is operated in front of BNC. If you do not know the IP and port of your proxy server, check the proxy server settings in your Internet browser or ask your network administrator.</p><p>Note that IP streaming is sometimes not allowed in a LAN. In this case you need to ask your network administrator for an appropriate modification of the local security policy or for the installation of a TCP relay to the Ntrip Broadcasters. If this is not possible, you may need to run BNC outside your LAN on a network that has unobstructed connection to the Internet.</p>"));
1234  _proxyPortLineEdit->setWhatsThis(tr("<p>Enter your proxy server port number in case a proxy is operated in front of BNC.</p>"));
1235  _sslCaCertPathLineEdit->setWhatsThis(tr("<p>Communication with an Ntrip Broadcaster over SSL requires the exchange of client and/or server certificates. Specify the path to a directory where you save certificates on your system. Don't try communication via SSL if you are not sure whether this is supported by the involved Ntrip Broadcaster.</p><p>Note that SSL communication is usually done over port 443.</p>"));
1236  _sslIgnoreErrorsCheckBox->setWhatsThis(tr("<p>SSL communication may involve queries coming from the Ntrip Broadcaster. Tick 'Ignore SSL authorization errors' if you don't want to be bothered with this.</p>"));
1237
1238  // WhatsThis, General
1239  // ------------------
1240  _logFileLineEdit->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab on the bottom of this window. They can be saved into a file when a valid path for that is specified in the 'Logfile (full path)' field.</p><p>The logfile name will automatically be extended by a string '_YYMMDD' carrying the current date.</p>"));
1241  _rnxAppendCheckBox->setWhatsThis(tr("<p>When BNC is started, new files are created by default and file content already available under the same name will be overwritten. However, users might want to append already existing files following a regular restart or a crash of BNC or its platform.</p><p>Tick 'Append files' to continue with existing files and keep what has been recorded so far.</p>"));
1242  _onTheFlyComboBox->setWhatsThis(tr("<p>When operating BNC online in 'no window' mode, some configuration parameters can be changed on-the-fly without interrupting the running process. For that BNC rereads parts of its configuration in pre-defined intervals.<p></p>Select '1 min', '5 min', '1 hour', or '1 day' to force BNC to reread its configuration every full minute, five minutes, hour, or day and let in between edited configuration options become effective on-the-fly without terminating uninvolved threads.</p><p>Note that when operating BNC in window mode, on-the-fly changeable configuration options become effective immediately via button 'Save & Reread Configuration'.</p>"));
1243  _autoStartCheckBox->setWhatsThis(tr("<p>Tick 'Auto start' for auto-start of BNC at startup time in window mode with preassigned processing options.</p>"));
1244  _rawOutFileLineEdit->setWhatsThis(tr("<p>Save all data coming in through various streams in the received order and format in one file.</p><p>This option is primarily meant for debugging purposes.</p>"));
1245
1246  // WhatsThis, RINEX Observations
1247  // -----------------------------
1248  _rnxPathLineEdit->setWhatsThis(tr("<p>Here you specify the path to where the RINEX Observation files will be stored.</p><p>If the specified directory does not exist, BNC will not create RINEX Observation files.</p>"));
1249  _rnxIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Observation file.</p>"));
1250  _rnxSamplSpinBox->setWhatsThis(tr("<p>Select the RINEX Observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all received epochs into RINEX Observation files.</p>"));
1251  _rnxSkelLineEdit->setWhatsThis(tr("<p>BNC allows using personal RINEX skeleton files that contain the RINEX header records you would like to include. You can derive a skeleton file from information given in an up to date sitelog.</p><p>A file in the RINEX Observations 'Directory' with a 'Skeleton extension' skl or SKL is interpreted by BNC as a personal RINEX header skeleton file for the corresponding stream. In case of 'SKL'/'skl' the 4-char ID forming the base name has to be written in upper/lower cases. </p>"));
1252  _rnxFileCheckBox->setWhatsThis(tr("<p>Tick check box 'Skeleton mandatory' in case you want that RINEX files are only produced if skeleton files are available for BNC. If no skeleton file is available for a particular source then no RINEX Observation file will be produced from the affected stream.</p><p>Note that a skeleton file contains RINEX header information such as receiver and antenna types. In case of stream conversion to RINEX Version 3, a skeleton file should also contain information on potentially available observation types. A missing skeleton file will therefore enforce BNC to only save a default set of RINEX 3 observation types.</p>"));
1253  _rnxScrpLineEdit->setWhatsThis(tr("<p>Whenever a RINEX Observation file is finally saved, you may want to compress, copy or upload it immediately, for example via FTP. BNC allows you to execute a script/batch file to carry out such operation.</p><p>Specify the full path of a script or batch file. BNC will pass the full RINEX Observation file path to the script as command line parameter (%1 on Windows systems, $1 on Unix/Linux/Mac systems).</p>"));
1254  _rnxV2Priority->setWhatsThis(tr("<p>Specify a priority list of characters defining signal attributes as defined in RINEX Version 3. Priorities will be used to map observations with RINEX Version 3 attributes from incoming streams to Version 2. The underscore character '_' stands for undefined attributes. A question mark '?' can be used as wildcard which represents any one character.</p><p>Signal priorities can be specified either as equal for all systems or as system specific. The following are example priority strings:</li><ul><li>'CWPX_?' (Same signal priorities valid for all systems)</li><li>'G:CWPX_? R:PCX_? E:CPX_?' (Specific signal priorities for GPS, GLONASS and Galileo system)</li></ul>Default is priority list 'CWPX_?'.</p>"));
1255  _rnxV3CheckBox->setWhatsThis(tr("<p>The default format for RINEX Observation files is RINEX Version 2.</p><p>Select 'Version 3' if you want to save observations in RINEX Version 3 format.</p>"));
1256  _rnxV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format.</p>"));
1257
1258  // WhatsThis, RINEX Ephemeris
1259  // --------------------------
1260  _ephPathLineEdit->setWhatsThis(tr("<p>Specify the path for saving Broadcast Ephemeris data as RINEX Navigation files.</p><p>If the specified directory does not exist, BNC will not create RINEX Navigation files.</p>"));
1261  _ephIntrComboBox->setWhatsThis(tr("<p>Select the length of the RINEX Navigation file.</p>"));
1262  _ephOutPortLineEdit->setWhatsThis(tr("<p>BNC can produce ephemeris data in RINEX Navigation ASCII format on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1263  _ephV3CheckBox->setWhatsThis(tr("<p>The default format for output of RINEX Navigation data containing Broadcast Ephemeris is RINEX Version 2.</p><p>Select 'Version 3' if you want to output ephemeris in RINEX Version 3 format.</p>"));
1264  _ephV3filenameCheckBox->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard although the file content is saved in RINEX Version 3 format.</p>"));
1265
1266  // WhatsThis, RINEX Editing & QC
1267  // -----------------------------
1268  _reqcActionComboBox->setWhatsThis(tr("<p>BNC allows to 'Edit or Concatenate' RINEX Version 2 or 3 files or to perform a Quality Check (QC) and 'Analyze' data following UNAVCO's famous 'teqc' program.</p>"));
1269  _reqcEditOptionButton->setWhatsThis(tr("<p>Specify options for editing RINEX Version 2 or 3 files.</p>"));
1270  _reqcObsFileChooser->setWhatsThis(tr("<p>Specify the full path to input observation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX observation file is mandatory.</p>"));
1271  _reqcNavFileChooser->setWhatsThis(tr("<p>Specify the full path to input navigation files in RINEX Version 2 or 3 format.</p><p>Note that when in 'Analyze' mode, specifying at least one RINEX navigation file is mandatory.</p>"));
1272  _reqcOutObsLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Observation output file.</p><p>Default is an empty option field, meaning that no RINEX Observation output file will be produced.</p>"));
1273  _reqcOutNavLineEdit->setWhatsThis(tr("<p>Specify the full path to a RINEX Navigation output file.</p><p>Default is an empty option field, meaning that no RINEX Navigation output file will be produced.</p>"));
1274  _reqcOutLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile.</p><p>Default is an empty option field, meaning that no 'RINEX Editing & QC' logfile will be produced.</p>"));
1275  _reqcLogSummaryOnly->setWhatsThis(tr("<p>By default BNC produces a detailed 'Logfile' providing all information resulting from editing or analyzing RINEX data. If that is too much information, you can limit the logfile content to a short summary.</p><p>Tick 'Summary only' to suppress full logfile output and instead produce a logfile containing only summary information.</p>"));
1276  _reqcPlotDirLineEdit->setWhatsThis(tr("<p>Specify a directory for saving plots in PNG format.</p><p>Default is an empty option field, meaning that plots will not be saved on disk.</p>"));
1277  _reqcSkyPlotSignals->setWhatsThis(tr("<p>BNC can produce plots for multipath, signal-to-noise ratio, satellite availability, satellite elevation, and PDOP values. The 'Plots for signals' option lets you exactly specify observation signals to be used for that and also enables the plot generation. You can specify the navigation system, the frequency, and the tracking mode or channel as defined in RINEX Version 3. Specifications for frequency and tracking mode or channel must be separated by ampersand character '&'. Specifications for navigation systems must be separated by blank character ' '.</p><p>Examples for 'Plots for signals' option:<ul><li> G:1&2 R:1&2 J:1&2 E:1&7 C:1&6 S:1<br>(Plots will be based on GPS observations on 1st and 2nd frequency, GLONASS observations on 1st and 2nd frequency, QZSS observations on 1st and 2nd frequency, Galileo observations on 1st and 7th frequency, BeiDou observations on 1st and 6th frequency, SBAS observations on 1st frequency.)</li><li>G:1C&5X<br>(Plots will be based on GPS observations on 1st frequency in C tracking mode and GPS observations on 5th frequency in X tracking mode.)</li><li>C:6I&7I<br>(Plots will be based on BeiDou observations on 6th frequency in I tracking mode and BeiDou observations on 7th frequency in I tracking mode.)<li></ul></p><p>Default is 'C:2&7 E:1&5 G:1&2 J:1&2 R:1&2 S:1&5'. Specifying an empty option string would be overruled by this default.</p>"));
1278
1279  // WhatsThis, SP3 Comparison
1280  // -------------------------
1281  _sp3CompFileChooser->setWhatsThis(tr("<p>BNC can compare two SP3 files containing GNSS satellite orbit and clock information.</p></p>Specify the full path to two files with orbits and clocks in SP3 format, separate them by comma.</p>"));
1282  _sp3CompExclude->setWhatsThis(tr("<p>Specify satellites to exclude them from orbit and clock comparison. Example:<p>G04,G31,R</p><p>This excludes GPS satellites PRN 4 and 31 as well as all GLONASS satellites from the comparison.</p><p>Default is an empty option field, meaning that no satellite is excluded from the comparison.</p>"));
1283  _sp3CompLogLineEdit->setWhatsThis(tr("<p>Specify the full path to a logfile saving comparison results.</p><p>Specifying a logfile is mandatory. Comparing SP3 files and not saving comparison results on disk would be useless.</p>"));
1284
1285  // WhatsThis, Broadcast Corrections
1286  // --------------------------------
1287  _corrPathLineEdit->setWhatsThis(tr("<p>Specify a directory for saving Broadcast Ephemeris Correction files.</p><p>If the specified directory does not exist, BNC will not create the files.</p>"));
1288  _corrPortLineEdit->setWhatsThis(tr("<p>BNC can produce Broadcast Ephemeris Corrections on your local host through an IP port.</p><p>Specify a port number here to activate this function.</p>"));
1289  _corrIntrComboBox->setWhatsThis(tr("<p>Select the length of Broadcast Ephemeris Correction files.</p>"));
1290
1291  // WhatsThis, Feed Engine
1292  // ----------------------
1293  _outPortLineEdit->setWhatsThis(tr("<p>BNC can produce synchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1294  _outWaitSpinBox->setWhatsThis(tr("<p>When feeding a real-time GNSS network engine waiting for synchronized input epoch by epoch, BNC drops whatever is received later than 'Wait for full obs epoch' seconds.</p><p>A value of 3 to 5 seconds is recommended, depending on the latency of the incoming streams and the delay acceptable to your real-time GNSS network engine or product.</p>"));
1295  _outSamplSpinBox->setWhatsThis(tr("<p>Select a synchronized observation sampling interval in seconds.</p><p>A value of zero '0' tells BNC to send/store all received epochs.</p>"));
1296  _outFileLineEdit->setWhatsThis(tr("<p>Specify the full path to a file where synchronized observations are saved in plain ASCII format.</p><p>Beware that the size of this file can rapidly increase depending on the number of incoming streams.</p>"));
1297  _outUPortLineEdit->setWhatsThis(tr("<p>BNC can produce unsynchronized observations in a plain ASCII format on your local host via IP port.</p><p>Specify a port number to activate this function.</p>"));
1298
1299  // WhatsThis, Serial Output
1300  // ------------------------
1301  _serialMountPointLineEdit->setWhatsThis(tr("<p>Enter a 'Mountpoint' to forward the corresponding stream to a serial connected receiver.</p><p>Depending on the stream content, the receiver may use it for example for Differential GNSS, Precise Point Positioning or any other purpose supported by its firmware.</p>"));
1302  _serialPortNameLineEdit->setWhatsThis(tr("<p>Enter the serial 'Port name' selected for communication with your serial connected receiver. Valid port names are</p><pre>Windows:       COM1, COM2<br>Linux:         /dev/ttyS0, /dev/ttyS1<br>FreeBSD:       /dev/ttyd0, /dev/ttyd1<br>Digital Unix:  /dev/tty01, /dev/tty02<br>HP-UX:         /dev/tty1p0, /dev/tty2p0<br>SGI/IRIX:      /dev/ttyf1, /dev/ttyf2<br>SunOS/Solaris: /dev/ttya, /dev/ttyb</pre><p>Note that before you start BNC, you must plug a serial cable in the port defined here.</p>"));
1303  _serialBaudRateComboBox->setWhatsThis(tr("<p>Select a 'Baud rate' for the serial output link.</p><p>Note that your selection must equal the baud rate configured to the serial connected receiver. Using a high baud rate is recommended.</p>"));
1304  _serialFlowControlComboBox->setWhatsThis(tr("<p>Select a 'Flow control' for the serial output link.</p><p>Note that your selection must equal the flow control configured to the serial connected receiver. Select 'OFF' if you don't know better.</p>"));
1305  _serialDataBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Data bits' for the serial output link.</p><p>Note that your selection must equal the number of data bits configured to the serial connected receiver. Note further that often 8 data bits are used.</p>"));
1306  _serialParityComboBox->setWhatsThis(tr("<p>Select a 'Parity' for the serial output link.</p><p>Note that your selection must equal the parity selection configured to the serial connected receiver. The parity is often set to 'NONE'.</p>"));
1307  _serialStopBitsComboBox->setWhatsThis(tr("<p>Select the number of 'Stop bits' for the serial output link.</p><p>Note that your selection must equal the number of stop bits configured to the serial connected receiver. Note further that often 1 stop bit is used.</p>"));
1308  _serialAutoNMEAComboBox->setWhatsThis(tr("<p>The 'NMEA' option supports the so-called 'Virtual Reference Station' (VRS) concept which requires the receiver to send approximate position information to the Ntrip Broadcaster. Select 'no' if you don't want BNC to forward or upload any NMEA message to the Ntrip Broadcaster in support of VRS.</p><p>Select 'Auto' to automatically forward NMEA messages of type GGA from your serial connected receiver to the Ntrip Broadcaster and/or save them in a file.</p><p>Select 'Manual GPGGA' or 'Manual GNGGA' if you want BNC to produce and upload GPGGA or GNGGA NMEA messages to the Ntrip Broadcaster because your serial connected receiver doesn't generate these messages. A Talker ID 'GP' preceding the GGA string stands for GPS solutions while a Talker ID 'GN' stands for multi constellation solutions.</p><p>Note that selecting 'Auto' or 'Manual' works only for VRS streams which show up under the 'Streams' canvas on BNC's main window with 'nmea' stream attribute set to 'yes'. This attribute is either extracted from the Ntrip Broadcaster's source-table or introduced by the user via editing the BNC configuration file.</p>"));
1309  _serialFileNMEALineEdit->setWhatsThis(tr("<p>Specify the full path to a file where NMEA messages coming from your serial connected receiver are saved.</p><p>Default is an empty option field, meaning that NMEA messages will not be saved on disk.</p>"));
1310  _serialHeightNMEALineEdit->setWhatsThis(tr("<p>Specify an approximate 'Height' above mean sea level in meters for the reference station introduced by option 'Mountpoint'. Together with the latitude and longitude from the source-table, the height information is used to build GGA messages to be sent to the Ntrip Broadcaster.</p><p>For adjusting latitude and longitude values of a VRS stream given in the 'Streams' canvas, you can double click the latitude/longitude data fields, specify appropriate values and then hit Enter.</p><p>This option is only relevant when option 'NMEA' is set to 'Manual GPGGA' or 'Manual GNGGA' respectively.</p>"));
1311  _serialManualNMEASamplingSpinBox->setWhatsThis(tr("<p>Select a sampling interval in seconds for manual generation and upload of NMEA GGA sentences.</p><p>A sampling rate of '0' means, the a GGA sentence will be send only once to initialize the requested VRS stream. Note that some VRS systems need GGA sentences at regular intervals.</p>"));
1312
1313  // WhatsThis, Outages
1314  // ------------------
1315  _adviseObsRateComboBox->setWhatsThis(tr("<p>BNC can collect all returns (success or failure) coming from a decoder within a certain short time span to then decide whether a stream has an outage or its content is corrupted. The procedure needs a rough estimate of the expected 'Observation rate' of the incoming streams. When a continuous problem is detected, BNC can inform its operator about this event through an advisory note.</p><p>Default is an empty option field, meaning that you don't want BNC to report on stream failures or recoveries when exceeding a threshold time span.</p>"));
1316  _adviseFailSpinBox->setWhatsThis(tr("<p>An advisory note is generated when no (or only corrupted) observations are seen throughout the 'Failure threshold' time span. A value of 15 min (default) is recommended.</p><p>A value of zero '0' means that for any stream failure, however short, BNC immediately generates an advisory note.</p>"));
1317  _adviseRecoSpinBox->setWhatsThis(tr("<p>Following a stream outage or a longer series of bad observations, an advisory note is generated when valid observations are received again throughout the 'Recovery threshold' time span. A value of about 5min (default) is recommended.</p><p>A value of zero '0' means that for any stream recovery, however short, BNC immediately generates an advisory note.</p>"));
1318  _adviseScriptLineEdit->setWhatsThis(tr("<p>Specify the full path to a script or batch file to handle advisory notes generated in the event of corrupted streams or stream outages. The affected mountpoint and a comment 'Begin_Outage', 'End_Outage', 'Begin_Corrupted', or 'End_Corrupted' are passed on to the script as command line parameters.</p><p>The script may have the task to send the advisory notes by email to BNC's operator and/or to the affected stream provider.</p><p>An empty option field (default) or invalid path means that you don't want to use this option.</p>"));
1319
1320  // WhatsThis, Miscellaneous
1321  // ------------------------
1322  _miscMountLineEdit->setWhatsThis(tr("<p>Specify a mountpoint to apply any of the options shown below. Enter 'ALL' if you want to apply these options to all configured streams.</p><p>An empty option field (default) means that you don't want BNC to apply any of these options.</p>"));
1323  _miscIntrComboBox->setWhatsThis(tr("<p>BNC can average latencies per stream over a certain period of GPS time. The resulting mean latencies are recorded in the 'Log' tab at the end of each 'Log latency' interval together with results of a statistical evaluation (approximate number of covered epochs, data gaps).</p><p>Select a 'Log latency' interval or select the empty option field if you do not want BNC to log latencies and statistical information.</p>"));
1324  _miscScanRTCMCheckBox->setWhatsThis(tr("<p>Tick 'Scan RTCM' to log the numbers of incoming message types as well as contained antenna coordinates, antenna height, and antenna descriptor.</p><p>In case of RTCM Version 3 MSM streams, BNC will also log contained RINEX Version 3 observation types.</p>."));
1325  _miscPortLineEdit->setWhatsThis(tr("<p>BNC can output an incoming stream through an IP port of your local host.</p><p>Specify a port number to activate this function.</p>"));
1326
1327  // WhatsThis, PPP (1)
1328  // ------------------
1329  _pppWidgets._dataSource->setWhatsThis(tr("<p>Select 'Real-time Streams' for real-time PPP from RTCM streams or 'RINEX Files' for post processing PPP from RINEX files.</p><p><ul><li>Real-time PPP requires that you pull a RTCM stream carrying GNSS observations plus a stream providing corrections to Broadcast Ephemeris. If the observations stream does not contain Broadcast Ephemeris then you must in addition pull a Broadcast Ephemeris stream like 'RTCM3EPH' from Ntrip Broadcaster <u>products.igs-ip.net</u>.<br></li><li>Post processing PPP requires RINEX Observation files, RINEX Navigation files and a file with corrections to Broadcast Ephemeris in plain ASCII format as saved beforehand using BNC.</li></ul></p><p>Note that BNC allows to carry out PPP solutions simultaneously for several stations.</p>"));
1330  _pppWidgets._rinexObs->setWhatsThis(tr("<p>Specify the RINEX Observation file.</p>"));
1331  _pppWidgets._rinexNav->setWhatsThis(tr("<p>Specify the RINEX Navigation file.</p>"));
1332  _pppWidgets._corrMount->setWhatsThis(tr("<p>Specify a 'mountpoint' from the 'Streams' canvas below which provides corrections to Broadcast Ephemeris.</p><p>If you don't specify a corrections stream via this option, BNC will fall back to Single Point Positioning (SPP, positioning from observations and Broadcast Ephemeris only) instead of doing PPP.</p>"));
1333  _pppWidgets._corrFile->setWhatsThis(tr("<p>Specify the Broadcast Ephemeris Corrections file as saved beforehand using BNC.</p><p>If you don't specify corrections by this option, BNC will fall back to Single Point Positioning (SPP, positioning from RINEX Obs and RINEX Nav files only) instead of doing PPP.</p>"));
1334  _pppWidgets._antexFile->setWhatsThis(tr("<p>Observations in RTCM streams or RINEX files should be referred to the receiver's and to the satellite's Antenna Phase Center (APC) and therefore be corrected for<ul><li>Receiver APC offsets</li><li>Receiver APC variations</li><li>Satellite APC offsets.</li></ul> Specify the full path to an IGS 'ANTEX file' which contains APC offsets and variations.</p><p>If you don't specify an 'ANTEX file' then observations will not be corrected for APC offsets and variations.</p>"));
1335  _pppWidgets._crdFile->setWhatsThis(tr("<p>Enter the full path to an ASCII file which specifies the streams or files of those stations you want to process. Specifying a 'Coordinates file' is optional. If it exists, it should contain one record per station with the following parameters separated by blank character:<p><ul><li>Specify the station either by<ul><li>the 'Mountpoint' of the station's RTCM stream (when in real-time PPP mode), or</li><li>the 4-charater station ID of the RINEX Observations file (when in post processing PPP mode).</li></ul></li><li>Approximate X,Y,Z coordinate of station's Antenna Reference Point [m] (ARP, specify '0.0 0.0 0.0' if unknown).</li><li>North, East and Up component of antenna eccentricity [m] (specify '0.0 0.0 0.0' if unknown).</li><li>20 Characters describing the antenna type and radome following the IGS 'ANTEX file' standard (leave blank if unknown).</li><li>Receiver type following the naming conventions for IGS equipment.</li></ul></p><p>Records with exclamation mark '!' in the first column or blank records will be interpreted as comment lines and ignored.</p>"));
1336  _pppWidgets._v3filenames->setWhatsThis(tr("<p>Tick 'Version 3 filenames' to let BNC create so-called extended filenames for PPP logfiles, NMEA files and SINEX Troposphere files following the RINEX Version 3 standard.</p><p>Default is an empty check box, meaning to create filenames following the RINEX Version 2 standard. The file content is not affected by this option. It only concerns the filenames.</p>"));
1337  _pppWidgets._logPath->setWhatsThis(tr("<p>Specify a directory for saving daily PPP logfiles. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no PPP logfiles shall be produced.</p>"));
1338  _pppWidgets._nmeaPath->setWhatsThis(tr("<p>Specify a directory for saving coordinates in daily NMEA files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no NMEA file shall be produced.</p>"));
1339  _pppWidgets._snxtroPath->setWhatsThis(tr("<p>Specify a directory for saving SINEX Troposphere files. If the specified directory does not exist, BNC will not create such files.</p><p>Default is an empty option field, meaning that no SINEX Troposphere files shall be produced.</p>"));
1340  _pppWidgets._snxtroIntr->setWhatsThis(tr("<p>Select a length for SINEX Troposphere files.</p><p>Default 'SNX TRO interval' for saving SINEX Troposphere files on disk is '1 hour'.</p>"));
1341  _pppWidgets._snxtroSampl->setWhatsThis(tr("<p>Select a 'Sampling' rate for saving troposphere parameters.</p><p>Default 'SNX TRO sampling' rate is '0', meaning that all troposphere estimates will be saved on disk.</p>"));
1342  _pppWidgets._snxtroAc->setWhatsThis(tr("<p>Specify a 3-character abbreviation describing you as the generating Analysis Center (AC) in your SINEX troposphere files.</p>"));
1343  _pppWidgets._snxtroSol->setWhatsThis(tr("<p>Specify a 4-character solution ID to allow a distingtion between different solutions per AC.</p>"));
1344
1345  // WhatsThis, PPP (3)
1346  // ------------------
1347  _pppWidgets._lcGPS->setWhatsThis(tr("<p>Specify which kind of GPS observations you want to use and on which kind of ionosphere-free linear combination of GPS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Note that most geodetic receivers support the observation of GPS code and phase data. Hence specifying 'P3&L3' would be a good choice when processing data from such a receiver.</p><p>Specifying 'no' means that you don't want BNC to use GPS data.</p>"));
1348  _pppWidgets._lcGLONASS->setWhatsThis(tr("<p>Specify which kind of GLONASS observations you want to use and on which kind of ionosphere-free linear combination of GLONASS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying 'no' means that you don't want BNC to use GLONASS data.</p>"));
1349  _pppWidgets._lcGalileo->setWhatsThis(tr("<p>Specify which kind of Galileo observations you want to use and on which kind of of ionosphere-free linear combination of Galileo observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if Galileo data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want BNC to use Galileo data.</p>"));
1350  _pppWidgets._lcBDS->setWhatsThis(tr("<p>Specify which kind of BDS observations you want to use and on which kind of ionosphere-free linear combination of BDS observations you want to base ambiguity resolutions.</p><p><ul><li>Specifying 'P3' means that you request BNC to use code data and so-called P3 ionosphere-free linear combination of code observations.</li><li>'L3' means that you request BNC to use phase data and so-called L3 ionosphere-free linear combination of phase observations.</li> <li>'P3&L3' means that you request BNC to use both, code and phase data and so-called P3 and L3 ionosphere-free linear combination of code and phase observations.</li></ul></p><p>Specifying on of these options makes only sense if BDS data are part of the processed observation stream.</p><p>Specifying 'no' means that you don't want to use BDS data.</p>"));
1351  _pppWidgets._sigmaC1->setWhatsThis(tr("<p>Enter a Sigma for GNSS C1 code observations in meters.</p><p>The higher the sigma you enter, the less the contribution of C1 code observations to a PPP solution from combined code and phase data. 2.0 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma C1 = 2.0'</p>"));
1352  _pppWidgets._sigmaL1->setWhatsThis(tr("<p>Enter a Sigma for GNSS L1 phase observations in meters.</p><p>The higher the sigma you enter, the less the contribution of L1 phase observations to a PPP solutions from combined code and phase data. 0.01 is likely to be an appropriate choice.</p><p>Default is an empty option field, meaning<br>'Sigma L1 = 0.01'</p>"));
1353  _pppWidgets._maxResC1->setWhatsThis(tr("<p>Specify a maximum for residuals from C1 code observations in a PPP solution. '3.0' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex C1 = 3.0'</p>"));
1354  _pppWidgets._maxResL1->setWhatsThis(tr("<p>Specify a maximum for residuals from L1 code observations in a PPP solution. '0.03' meters may be an appropriate choice for that.</p><p>If the maximum is exceeded, contributions from the corresponding observation will be ignored in the PPP solution.</p><p>Default is an empty option field, meaning<br>'Max Rex L1 = 0.03'</p>"));
1355  _pppWidgets._eleWgtCode->setWhatsThis(tr("<p>Tic 'Ele Wgt Code' to use satellite Elevation depending Weights for Code observations in the PPP solution.</p>"));
1356  _pppWidgets._eleWgtPhase->setWhatsThis(tr("<p>Tic 'Ele Wgt Phase' to use satellite Elevation depending Weights for Phase observations in the PPP solution.</p>"));
1357  _pppWidgets._minObs->setWhatsThis(tr("<p>Select a Minimum Number of Observations per epoch for a PPP solution.</p><p>BNC will only process epochs with observation numbers reaching or exceeding this minimum.</p>"));
1358  _pppWidgets._minEle->setWhatsThis(tr("<p>Select a Minimum satellite Elevation for observations.</p><p>BNC will ignore an observation if the associated satellite Elevation does not reach or exceed this minimum.</p><p>Selecting '10 deg' may be an appropriate choice in order to avoid too noisy observations.</p>"));
1359
1360  // WhatsThis, Combine Corrections
1361  // ------------------------------
1362  _cmbTable->setWhatsThis(tr("<p>BNC allows to process several orbit and clock correction streams in real-time to produce, encode, upload and save a combination of correctors coming from different providers. To add a line to the 'Combine Corrections' table hit the 'Add Row' button, double click on the 'Mountpoint' field to specify a Broadcast Ephemeris Correction mountpoint from the 'Streams' section below and hit Enter. Then double click on the 'AC Name' field to enter your choice of an abbreviation for the Analysis Center (AC) providing the stream. Finally, double click on the 'Weight' field to enter a weight to be applied for this stream in the combination.</p><p>Note that the orbit information in the resulting combination stream is just copied from one of the incoming streams. The stream used for providing the orbits may vary over time: if the orbit providing stream has an outage then BNC switches to the next remaining stream for getting hold of the orbit information.</p><p>The combination process requires Broadcast Ephemeris. Besides orbit and clock correction streams BNC should therefore pull a stream carrying Broadcast Ephemeris in the form of RTCM Version 3 messages.</p><p>It is possible to specify only one Broadcast Ephemeris Correction stream in the 'Combine Corrections' table. Instead of combining corrections BNC will then add the corrections to the Broadcast Ephemeris with the possibility to save final orbit and clock results in SP3 and/or Clock RINEX format.</p>"));
1363  addCmbRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Combine Corrections' table.</p>"));
1364  delCmbRowButton->setWhatsThis(tr("<p>Hit 'Delete' button to delete the highlighted line(s) from the 'Combine Corrections' table.</p>"));
1365  _cmbMethodComboBox->setWhatsThis(tr("<p>Select a clock combination approach. Options are 'Single-Epoch' and Kalman 'Filter'.</p><p>It is suggested to use the Kalman filter approach for the purpose of Precise Point Positioning.</p>"));
1366  _cmbMaxresLineEdit->setWhatsThis(tr("<p>BNC combines all incoming clocks according to specified weights. Individual clock estimates that differ by more than 'Maximal residuum' meters from the average of all clocks will be ignored.<p></p>It is suggested to specify a value of about 0.2 m for the Kalman filter combination approach and a value of about 3.0 meters for the Single-Epoch combination approach.</p><p>Default is a value of '999.0'.</p>"));
1367  _cmbSamplSpinBox->setWhatsThis(tr("<p>Select a combination Sampling interval for the clocks. Clock corrections will be produced following that interval.</p><p>A value of 10 sec may be an appropriate choice.</p>"));
1368  _cmbUseGlonass->setWhatsThis(tr("<p>In case the incoming orbit and clock correction stream(s) support GLONASS, you can tick 'Use GLONASS' to produce a GPS plus GLONASS combination solution.</p><p>Default is a GPS-only combination.</p>"));
1369
1370  // WhatsThis, Upload Corrections
1371  // -----------------------------
1372  _uploadTable->setWhatsThis(tr("<p>BNC can upload clock and orbit corrections to Broadcast Ephemeris (Broadcast Corrections) in RTCM Version 3 SSR format. You may have a situation where clocks and orbits come from an external Real-time Network Engine (1) or a situation where clock and orbit corrections are combined within BNC (2).</p><p>(1) BNC identifies a stream as coming from a Real-time Network Engine if its format is specified as 'RTNET' and hence its decoder string in the 'Streams' canvas is 'RTNET'. It encodes and uploads that stream to the specified Ntrip Broadcaster Host and Port</p><p>(2) BNC understands that it is expected to encode and upload combined Broadcast Ephemeris Corrections if you specify correction streams in the 'Combine Corrections' table.</p><p>To fill the 'Upload Corrections' table, hit the 'Add Row' button, double click on the 'Host' field to enter the IP or URL of an Ntrip Broadcaster and hit Enter. Then double click on the 'Port', 'Mount' and 'Password' fields to enter the Ntrip Broadcaster IP port (default is 80), the mountpoint and the stream upload password. An empty 'Host' option field means that you don't want to upload corrections.</p><p>Select a target coordinate reference System (e.g. IGS08) for outgoing clock and orbit corrections.</p><p>By default orbit and clock corrections refer to Antenna Phase Center (APC). Tick 'CoM' to refer uploaded corrections to Center of Mass instead of APC.</p><p>Specify a path for saving generated Broadcast Corrections plus Broadcast Ephemeris as SP3 orbit files. If the specified directory does not exist, BNC will not create such files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.sp3<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Specify a path for saving generated Broadcast Correction clocks plus Broadcast Ephemeris clocks as Clock RINEX files. If the specified directory does not exist, BNC will not create Clock RINEX files. The following is a path example for a Linux system: /home/user/BNC${GPSWD}.clk<br>Note that '${GPSWD}' produces the GPS Week and Day number in the filename.</p><p>Finally, specify a SSR Provider ID (issued by RTCM), SSR Solution ID, and SSR Issue of Data number.</p><p>In case the 'Combine Corrections' table contains only one Broadcast Correction stream, BNC will add that stream content to the Broadcast Ephemeris to save results in files specified via SP3 and/or Clock RINEX file path. You should then define only the SP3 and Clock RINEX file path and no further option in the 'Upload Corrections' table.</p>"));
1373  addUploadRowButton->setWhatsThis(tr("<p>Hit 'Add Row' button to add another line to the 'Upload Corrections' table.</p>"));
1374  delUploadRowButton->setWhatsThis(tr("<p>Hit 'Del Row' button to delete the highlighted line(s) from the Upload Corrections' table.</p>"));
1375  _uploadIntrComboBox->setWhatsThis(tr("<p>Select the length of the SP3 and Clock RINEX files.</p>"));
1376  _uploadSamplRtcmEphCorrSpinBox->setWhatsThis(tr("<p>Select a stream's orbit correction sampling interval in seconds.</p><p>A value of zero '0' tells BNC to upload all available orbit and clock correction samples together in combined messages.</p>"));
1377  _uploadSamplSp3SpinBox->setWhatsThis(tr("<p>Select a SP3 orbit file sampling interval in minutes.</p><p>A value of zero '0' tells BNC to store all available samples into SP3 orbit files.</p>"));
1378  _uploadSamplClkRnxSpinBox->setWhatsThis(tr("<p>Select a Clock RINEX file sampling interval in seconds.</p><p>A value of zero '0' tells BNC to store all available samples into Clock RINEX files.</p>"));
1379  setUploadTrafoButton->setWhatsThis(tr("<p>Hit 'Custom Trafo' to specify your own 14 parameter Helmert Transformation instead of selecting a predefined transformation via option 'System'.</p>"));
1380  _uploadAntexFile->setWhatsThis(tr("<p>When producing SP3 files or referring orbit and clock corrections to the satellite's Center of Mass (CoM) instead Antenna Phase Center (APC), an offset has to be applied which is available from the IGS 'ANTEX file'. You must therefore specify an 'ANTEX file' path if you want to save the stream content in SP3 format and/or refer correctors to CoM.</p><p>If you don't specify an 'ANTEX file' path, the SP3 file content as well as the orbit and clock correctors will be referred to satellite APCs.</p>"));
1381
1382  // WhatsThis, Upload Ephemeris
1383  // ---------------------------
1384  _uploadEphHostLineEdit->setWhatsThis(tr("<p>BNC can upload a Broadcast Ephemeris stream in RTCM Version 3 format. Specify the IP number or URL of an Ntrip Broadcaster to upload the stream.</p><p>An empty option field means that you don't want to upload Broadcast Ephemeris.</p>"));
1385  _uploadEphPortLineEdit->setWhatsThis(tr("<p>Specify the IP port of the Ntrip Broadcaster to upload the Broadcast Ephemeris stream. Default is port 80.</p>"));
1386  _uploadEphMountpointLineEdit->setWhatsThis(tr("<p>Specify a mountpoint for uploading the Broadcast Ephemeris stream.</p>"));
1387  _uploadEphPasswordLineEdit->setWhatsThis(tr("<p>Specify the stream upload password protecting the mounpoint on the Ntrip Broadcaster.</p>"));
1388  _uploadEphSampleSpinBox->setWhatsThis(tr("<p>Select the Broadcast Ephemeris sampling interval in seconds.</p><p>Default is '5', meaning that a complete set of Broadcast Ephemeris is uploaded every 5 seconds.</p>"));
1389  _uploadEphBytesCounter->setWhatsThis(tr("<p>BNC shows the amount of data uploaded via this stream.</p>"));
1390// weber
1391
1392  // WhatsThis, Streams Canvas
1393  // -------------------------
1394  _mountPointsTable->setWhatsThis(tr("<p>Streams selected for retrieval are listed in the 'Streams' section. Clicking on 'Add Stream' button opens a window that allows the user to select data streams from an Ntrip Broadcaster according to their mountpoints. To remove a stream from the 'Streams' list, highlight it by clicking on it and hit the 'Delete Stream' button. You can also remove multiple streams by highlighting them using +Shift and +Ctrl.</p><p>BNC automatically allocates one of its internal decoders to a stream based on the stream's 'format' as given in the source-table. BNC allows users to change this selection by editing the decoder string. Double click on the 'decoder' field, enter your preferred decoder and then hit Enter. Accepted decoder strings are 'RTCM_2.x', 'RTCM_3.x' and 'RTNET'.</p><p>In case you need to log raw data as is, BNC allows to by-pass its decoders and directly save the input in daily log files. To do this specify the decoder string as 'ZERO'.</p><p>BNC can also retrieve streams from virtual reference stations (VRS). VRS streams are indicated by a 'yes' in the 'nmea' column. To initiate such stream, the approximate latitude/longitude rover position is sent to the Ntrip Broadcaster together with an approximation for the height. Default values for latitude and longitude can be change according to your requirement. Double click on 'lat' and 'long' fields, enter the values you wish to send and then hit Enter.</p>"));
1395  _actAddMountPoints->setWhatsThis(tr("<p>Add stream(s) to selection presented in the 'Streams' canvas.</p>"));
1396  _actDeleteMountPoints->setWhatsThis(tr("<p>Delete stream(s) from selection presented in the 'Streams' canvas.</p>"));
1397  _actMapMountPoints->setWhatsThis(tr("<p> Draw distribution map of stream selection presented in the 'Streams' canvas. Use mouse to zoom in or out.</p><p>Left button: Draw rectangle to zoom in.<br>Right button: Zoom out.<br>Middle button: Zoom back.</p>"));
1398  _actStart->setWhatsThis(tr("<p> Start running BNC.</p>"));
1399  _actStop->setWhatsThis(tr("<p> Stop running BNC.</p>"));
1400
1401  // WhatsThis, Log Canvas
1402  // ---------------------
1403  _log->setWhatsThis(tr("<p>Records of BNC's activities are shown in the 'Log' tab. The message log covers the communication status between BNC and the Ntrip Broadcaster as well as problems that occur in the communication link, stream availability, stream delay, stream conversion etc.</p>"));
1404  _bncFigure->setWhatsThis(tr("<p>The bandwidth consumption per stream is shown in the 'Throughput' tab in bits per second (bps) or kilobits per second (kbps).</p>"));
1405  _bncFigureLate->setWhatsThis(tr("<p>The individual latency of observations of incoming streams is shown in the 'Latency' tab. Streams not carrying observations (e.g. those providing only Broadcast Ephemeris) remain unconsidered.</p><p>Note that the calculation of correct latencies requires the clock of the host computer to be properly synchronized.</p>"));
1406  _bncFigurePPP->setWhatsThis(tr("<p>PPP time series of North (red), East (green) and Up (blue) displacements are shown in the 'PPP Plot' tab when the corresponding option is selected.</p><p>Values are referred to an XYZ a priori coordinate. The sliding PPP time series window covers the period of the latest 5 minutes.</p>"));
1407
1408
1409  // Enable/Disable all Widgets
1410  // --------------------------
1411  slotBncTextChanged();
1412  enableStartStop();
1413
1414  // Auto start
1415  // ----------
1416  if ( Qt::CheckState(settings.value("autoStart").toInt()) == Qt::Checked) {
1417    slotStart();
1418  }
1419}
1420
1421// Destructor
1422////////////////////////////////////////////////////////////////////////////
1423bncWindow::~bncWindow() {
1424  if (_caster) {
1425    delete _caster; BNC_CORE->setCaster(0);
1426  }
1427  if (_casterEph) {
1428    delete _casterEph;
1429  }
1430  delete _bncFigureLate;
1431  delete _bncFigurePPP;
1432  delete _actHelp;
1433  delete _actAbout;
1434  delete _actFlowchart;
1435  delete _actFontSel;
1436  delete _actSaveOpt;
1437  delete _actQuit;
1438  delete _actAddMountPoints;
1439  delete _actDeleteMountPoints;
1440  delete _actMapMountPoints;
1441  delete _actStart;
1442  delete _actStop;
1443  delete _actwhatsthis;
1444  delete _proxyHostLineEdit;
1445  delete _proxyPortLineEdit;
1446  delete _sslCaCertPathLineEdit;
1447  delete _sslIgnoreErrorsCheckBox;
1448  delete _logFileLineEdit;
1449  delete _rawOutFileLineEdit;
1450  delete _rnxAppendCheckBox;
1451  delete _onTheFlyComboBox;
1452  delete _autoStartCheckBox;
1453  delete _rnxPathLineEdit;
1454  delete _rnxIntrComboBox;
1455  delete _rnxSamplSpinBox;
1456  delete _rnxFileCheckBox;
1457  delete _rnxSkelLineEdit;
1458  delete _rnxScrpLineEdit;
1459  delete _rnxV3CheckBox;
1460  delete _rnxV3filenameCheckBox;
1461  delete _rnxV2Priority;
1462  delete _ephPathLineEdit;
1463  delete _ephIntrComboBox;
1464  delete _ephOutPortLineEdit;
1465  delete _ephV3CheckBox;
1466  delete _ephV3filenameCheckBox;
1467  delete _corrPathLineEdit;
1468  delete _corrIntrComboBox;
1469  delete _corrPortLineEdit;
1470  delete _outPortLineEdit;
1471  delete _outWaitSpinBox;
1472  delete _outSamplSpinBox;
1473  delete _outFileLineEdit;
1474  delete _outUPortLineEdit;
1475  delete _serialMountPointLineEdit;
1476  delete _serialPortNameLineEdit;
1477  delete _serialBaudRateComboBox;
1478  delete _serialFlowControlComboBox;
1479  delete _serialDataBitsComboBox;
1480  delete _serialParityComboBox;
1481  delete _serialStopBitsComboBox;
1482  delete _serialAutoNMEAComboBox;
1483  delete _serialFileNMEALineEdit;
1484  delete _serialHeightNMEALineEdit;
1485  delete _serialManualNMEASamplingSpinBox;
1486  delete _adviseObsRateComboBox;
1487  delete _adviseFailSpinBox;
1488  delete _adviseRecoSpinBox;
1489  delete _adviseScriptLineEdit;
1490  delete _miscMountLineEdit;
1491  delete _miscPortLineEdit;
1492  delete _miscIntrComboBox;
1493  delete _miscScanRTCMCheckBox;
1494  _mountPointsTable->deleteLater();
1495  delete _log;
1496  _cmbTable->deleteLater();
1497  delete _cmbMaxresLineEdit;
1498  delete _cmbUseGlonass;
1499  delete _cmbSamplSpinBox;
1500  delete _cmbMethodComboBox;
1501  _uploadTable->deleteLater();
1502  delete _uploadIntrComboBox;
1503  delete _uploadAntexFile;
1504  delete _uploadSamplRtcmEphCorrSpinBox;
1505  delete _uploadSamplSp3SpinBox;
1506  delete _uploadSamplClkRnxSpinBox;
1507  delete _uploadEphHostLineEdit;
1508  delete _uploadEphPortLineEdit;
1509  delete _uploadEphPasswordLineEdit;
1510  delete _uploadEphMountpointLineEdit;
1511  delete _uploadEphSampleSpinBox;
1512  delete _uploadEphBytesCounter;
1513  delete _loggroup;
1514  delete _reqcActionComboBox;
1515  delete _reqcObsFileChooser;
1516  delete _reqcNavFileChooser;
1517  delete _reqcOutObsLineEdit;
1518  delete _reqcOutNavLineEdit;
1519  delete _reqcOutLogLineEdit;
1520  delete _reqcPlotDirLineEdit;
1521  delete _reqcSkyPlotSignals;
1522  delete _reqcLogSummaryOnly;
1523  delete _reqcEditOptionButton;
1524  delete _sp3CompFileChooser;
1525  delete _sp3CompExclude;
1526  delete _sp3CompLogLineEdit;
1527  //delete _canvas;
1528}
1529
1530//
1531////////////////////////////////////////////////////////////////////////////
1532void bncWindow::populateMountPointsTable() {
1533
1534  for (int iRow = _mountPointsTable->rowCount()-1; iRow >=0; iRow--) {
1535    _mountPointsTable->removeRow(iRow);
1536  }
1537
1538  bncSettings settings;
1539
1540  QListIterator<QString> it(settings.value("mountPoints").toStringList());
1541  int iRow = 0;
1542  while (it.hasNext()) {
1543    QStringList hlp = it.next().split(" ");
1544    if (hlp.size() < 7) continue;
1545    _mountPointsTable->insertRow(iRow);
1546
1547    QUrl    url(hlp[0]);
1548
1549    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1550    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1551    QString nmea(hlp[5]);
1552    if (hlp[6] == "S") {
1553      fullPath = hlp[0].replace(0,2,"");
1554    }
1555    QString ntripVersion = "2";
1556    if (hlp.size() >= 7) {
1557      ntripVersion = (hlp[6]);
1558    }
1559
1560    QTableWidgetItem* it;
1561    it = new QTableWidgetItem(url.userInfo());
1562    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1563    _mountPointsTable->setItem(iRow, 0, it);
1564
1565    it = new QTableWidgetItem(fullPath);
1566    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1567    _mountPointsTable->setItem(iRow, 1, it);
1568
1569    it = new QTableWidgetItem(format);
1570    _mountPointsTable->setItem(iRow, 2, it);
1571
1572    it = new QTableWidgetItem(country);
1573    _mountPointsTable->setItem(iRow, 3, it);
1574
1575    if      (nmea == "yes") {
1576      it = new QTableWidgetItem(latitude);
1577      _mountPointsTable->setItem(iRow, 4, it);
1578      it = new QTableWidgetItem(longitude);
1579      _mountPointsTable->setItem(iRow, 5, it);
1580    } else {
1581      it = new QTableWidgetItem(latitude);
1582      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1583      _mountPointsTable->setItem(iRow, 4, it);
1584
1585      it = new QTableWidgetItem(longitude);
1586      it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1587      _mountPointsTable->setItem(iRow, 5, it);
1588    }
1589
1590    it = new QTableWidgetItem(nmea);
1591    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1592    _mountPointsTable->setItem(iRow, 6, it);
1593
1594    it = new QTableWidgetItem(ntripVersion);
1595    ////    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1596    _mountPointsTable->setItem(iRow, 7, it);
1597
1598    bncTableItem* bncIt = new bncTableItem();
1599    bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
1600    _mountPointsTable->setItem(iRow, 8, bncIt);
1601
1602    iRow++;
1603  }
1604
1605  _mountPointsTable->sortItems(1);
1606
1607  enableStartStop();
1608}
1609
1610// Retrieve Table
1611////////////////////////////////////////////////////////////////////////////
1612void bncWindow::slotAddMountPoints() {
1613
1614  bncSettings settings;
1615  QString proxyHost = settings.value("proxyHost").toString();
1616  int     proxyPort = settings.value("proxyPort").toInt();
1617  if (proxyHost != _proxyHostLineEdit->text()         ||
1618      proxyPort != _proxyPortLineEdit->text().toInt()) {
1619    int iRet = QMessageBox::question(this, "Question", "Proxy options "
1620                                     "changed. Use the new ones?",
1621                                     QMessageBox::Yes, QMessageBox::No,
1622                                     QMessageBox::NoButton);
1623    if      (iRet == QMessageBox::Yes) {
1624      settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1625      settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1626    }
1627  }
1628
1629  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1630  settings.setValue("sslIgnoreErrors", _sslIgnoreErrorsCheckBox->checkState());
1631
1632  QMessageBox msgBox;
1633  msgBox.setIcon(QMessageBox::Question);
1634  msgBox.setWindowTitle("Add Stream");
1635  msgBox.setText("Add stream(s) coming from:");
1636
1637  QPushButton* buttonNtrip  = msgBox.addButton(tr("Caster"), QMessageBox::ActionRole);
1638  QPushButton* buttonIP     = msgBox.addButton(tr("TCP/IP port"), QMessageBox::ActionRole);
1639  QPushButton* buttonUDP    = msgBox.addButton(tr("UDP port"), QMessageBox::ActionRole);
1640  QPushButton* buttonSerial = msgBox.addButton(tr("Serial port"), QMessageBox::ActionRole);
1641  QPushButton* buttonCancel = msgBox.addButton(tr("Cancel"), QMessageBox::ActionRole);
1642
1643  msgBox.exec();
1644
1645  if (msgBox.clickedButton() == buttonNtrip) {
1646    bncTableDlg* dlg = new bncTableDlg(this);
1647    dlg->move(this->pos().x()+50, this->pos().y()+50);
1648    connect(dlg, SIGNAL(newMountPoints(QStringList*)),
1649          this, SLOT(slotNewMountPoints(QStringList*)));
1650    dlg->exec();
1651    delete dlg;
1652  } else if (msgBox.clickedButton() == buttonIP) {
1653    bncIpPort* ipp = new bncIpPort(this);
1654    connect(ipp, SIGNAL(newMountPoints(QStringList*)),
1655          this, SLOT(slotNewMountPoints(QStringList*)));
1656    ipp->exec();
1657    delete ipp;
1658  } else if (msgBox.clickedButton() == buttonUDP) {
1659    bncUdpPort* udp = new bncUdpPort(this);
1660    connect(udp, SIGNAL(newMountPoints(QStringList*)),
1661          this, SLOT(slotNewMountPoints(QStringList*)));
1662    udp->exec();
1663    delete udp;
1664  } else if (msgBox.clickedButton() == buttonSerial) {
1665    bncSerialPort* sep = new bncSerialPort(this);
1666    connect(sep, SIGNAL(newMountPoints(QStringList*)),
1667          this, SLOT(slotNewMountPoints(QStringList*)));
1668    sep->exec();
1669    delete sep;
1670  } else if (msgBox.clickedButton() == buttonCancel) {
1671    // Cancel
1672  }
1673
1674  enableStartStop();
1675}
1676
1677// Delete Selected Mount Points
1678////////////////////////////////////////////////////////////////////////////
1679void bncWindow::slotDeleteMountPoints() {
1680
1681  int nRows = _mountPointsTable->rowCount();
1682  bool flg[nRows];
1683  for (int iRow = 0; iRow < nRows; iRow++) {
1684    if (_mountPointsTable->isItemSelected(_mountPointsTable->item(iRow,1))) {
1685      flg[iRow] = true;
1686    }
1687    else {
1688      flg[iRow] = false;
1689    }
1690  }
1691  for (int iRow = nRows-1; iRow >= 0; iRow--) {
1692    if (flg[iRow]) {
1693      _mountPointsTable->removeRow(iRow);
1694    }
1695  }
1696  _actDeleteMountPoints->setEnabled(false);
1697
1698  enableStartStop();
1699}
1700
1701// New Mount Points Selected
1702////////////////////////////////////////////////////////////////////////////
1703void bncWindow::slotNewMountPoints(QStringList* mountPoints) {
1704  int iRow = 0;
1705  QListIterator<QString> it(*mountPoints);
1706  while (it.hasNext()) {
1707    QStringList hlp = it.next().split(" ");
1708    QUrl    url(hlp[0]);
1709    QString fullPath = url.host() + QString(":%1").arg(url.port()) + url.path();
1710    QString format(hlp[1]); QString country(hlp[2]); QString latitude(hlp[3]); QString longitude(hlp[4]);
1711    QString nmea(hlp[5]);
1712    if (hlp[6] == "S") {
1713      fullPath = hlp[0].replace(0,2,"");
1714    }
1715    QString ntripVersion = "2";
1716    if (hlp.size() >= 7) {
1717      ntripVersion = (hlp[6]);
1718    }
1719
1720    _mountPointsTable->insertRow(iRow);
1721
1722    QTableWidgetItem* it;
1723    it = new QTableWidgetItem(url.userInfo());
1724    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1725    _mountPointsTable->setItem(iRow, 0, it);
1726
1727    it = new QTableWidgetItem(fullPath);
1728    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1729    _mountPointsTable->setItem(iRow, 1, it);
1730
1731    it = new QTableWidgetItem(format);
1732    _mountPointsTable->setItem(iRow, 2, it);
1733
1734    it = new QTableWidgetItem(country);
1735    _mountPointsTable->setItem(iRow, 3, it);
1736
1737    if      (nmea == "yes") {
1738    it = new QTableWidgetItem(latitude);
1739    _mountPointsTable->setItem(iRow, 4, it);
1740    it = new QTableWidgetItem(longitude);
1741    _mountPointsTable->setItem(iRow, 5, it);
1742    } else {
1743    it = new QTableWidgetItem(latitude);
1744    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1745    _mountPointsTable->setItem(iRow, 4, it);
1746    it = new QTableWidgetItem(longitude);
1747    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1748    _mountPointsTable->setItem(iRow, 5, it);
1749    }
1750
1751    it = new QTableWidgetItem(nmea);
1752    it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1753    _mountPointsTable->setItem(iRow, 6, it);
1754
1755    it = new QTableWidgetItem(ntripVersion);
1756    ////it->setFlags(it->flags() & ~Qt::ItemIsEditable);
1757    _mountPointsTable->setItem(iRow, 7, it);
1758
1759    bncTableItem* bncIt = new bncTableItem();
1760    _mountPointsTable->setItem(iRow, 8, bncIt);
1761
1762    iRow++;
1763  }
1764  _mountPointsTable->hideColumn(0);
1765  _mountPointsTable->hideColumn(3);
1766  _mountPointsTable->sortItems(1);
1767  delete mountPoints;
1768
1769  enableStartStop();
1770}
1771
1772// Save Options (serialize)
1773////////////////////////////////////////////////////////////////////////////
1774void bncWindow::slotSaveOptions() {
1775  saveOptions();
1776  bncSettings settings;
1777  settings.sync();
1778}
1779
1780// Save Options (memory only)
1781////////////////////////////////////////////////////////////////////////////
1782void bncWindow::saveOptions() {
1783
1784  QStringList mountPoints;
1785  for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
1786
1787    if (_mountPointsTable->item(iRow, 6)->text() != "S") {
1788      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
1789                "@"  + _mountPointsTable->item(iRow, 1)->text() );
1790
1791      mountPoints.append(url.toString() + " " +
1792                         _mountPointsTable->item(iRow, 2)->text()
1793                 + " " + _mountPointsTable->item(iRow, 3)->text()
1794                 + " " + _mountPointsTable->item(iRow, 4)->text()
1795                 + " " + _mountPointsTable->item(iRow, 5)->text()
1796                 + " " + _mountPointsTable->item(iRow, 6)->text()
1797                 + " " + _mountPointsTable->item(iRow, 7)->text());
1798    } else {
1799      mountPoints.append(
1800                  "//" + _mountPointsTable->item(iRow, 1)->text()
1801                 + " " + _mountPointsTable->item(iRow, 2)->text()
1802                 + " " + _mountPointsTable->item(iRow, 3)->text()
1803                 + " " + _mountPointsTable->item(iRow, 4)->text()
1804                 + " " + _mountPointsTable->item(iRow, 5)->text()
1805                 + " " + _mountPointsTable->item(iRow, 6)->text()
1806                 + " " + _mountPointsTable->item(iRow, 7)->text());
1807    }
1808  }
1809
1810  QStringList cmbStreams;
1811  for (int iRow = 0; iRow < _cmbTable->rowCount(); iRow++) {
1812    QString hlp;
1813    for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
1814      if (_cmbTable->item(iRow, iCol)) {
1815        hlp += _cmbTable->item(iRow, iCol)->text() + " ";
1816      }
1817    }
1818    if (!hlp.isEmpty()) {
1819      cmbStreams << hlp;
1820    }
1821  }
1822
1823  QStringList uploadMountpointsOut;
1824  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
1825    QString hlp;
1826    for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
1827      if (_uploadTable->cellWidget(iRow, iCol) &&
1828          (iCol == 3 || iCol == 4 || iCol == 5)) {
1829        if      (iCol == 3) {
1830          QLineEdit* passwd = (QLineEdit*)(_uploadTable->cellWidget(iRow, iCol));
1831          hlp += passwd->text() + ",";
1832        }
1833        else if (iCol == 4) {
1834          QComboBox* system = (QComboBox*)(_uploadTable->cellWidget(iRow, iCol));
1835          hlp += system->currentText() + ",";
1836        }
1837        else if (iCol == 5) {
1838          QCheckBox* com    = (QCheckBox*)(_uploadTable->cellWidget(iRow, iCol));
1839          QString state; state.setNum(com->checkState());
1840          hlp +=  state + ",";
1841        }
1842      }
1843      else if (_uploadTable->item(iRow, iCol)) {
1844        hlp += _uploadTable->item(iRow, iCol)->text() + ",";
1845      }
1846    }
1847    if (!hlp.isEmpty()) {
1848      uploadMountpointsOut << hlp;
1849    }
1850  }
1851
1852  bncSettings settings;
1853
1854  settings.setValue("startTab",    _aogroup->currentIndex());
1855  settings.setValue("statusTab",   _loggroup->currentIndex());
1856  settings.setValue("mountPoints", mountPoints);
1857// Network
1858  settings.setValue("proxyHost",   _proxyHostLineEdit->text());
1859  settings.setValue("proxyPort",   _proxyPortLineEdit->text());
1860  settings.setValue("sslCaCertPath",   _sslCaCertPathLineEdit->text());
1861  settings.setValue("sslIgnoreErrors",  _sslIgnoreErrorsCheckBox->checkState());
1862// General
1863  settings.setValue("logFile",     _logFileLineEdit->text());
1864  settings.setValue("rnxAppend",   _rnxAppendCheckBox->checkState());
1865  settings.setValue("onTheFlyInterval", _onTheFlyComboBox->currentText());
1866  settings.setValue("autoStart",   _autoStartCheckBox->checkState());
1867  settings.setValue("rawOutFile",  _rawOutFileLineEdit->text());
1868// RINEX Observations
1869  settings.setValue("rnxPath",     _rnxPathLineEdit->text());
1870  settings.setValue("rnxIntr",     _rnxIntrComboBox->currentText());
1871  settings.setValue("rnxSampl",    _rnxSamplSpinBox->value());
1872  settings.setValue("rnxSkel",     _rnxSkelLineEdit->text());
1873  settings.setValue("rnxOnlyWithSKL",_rnxFileCheckBox->checkState());
1874  settings.setValue("rnxV3filenames",_rnxV3filenameCheckBox->checkState());
1875  settings.setValue("rnxScript",   _rnxScrpLineEdit->text());
1876  (_rnxV3filenameCheckBox->checkState()) ?
1877    settings.setValue("rnxV3",       _rnxV3filenameCheckBox->checkState()) :
1878    settings.setValue("rnxV3",       _rnxV3CheckBox->checkState());
1879  settings.setValue("rnxV2Priority",_rnxV2Priority->text());
1880// RINEX Ephemeris
1881  settings.setValue("ephPath",       _ephPathLineEdit->text());
1882  settings.setValue("ephIntr",       _ephIntrComboBox->currentText());
1883  settings.setValue("ephOutPort",    _ephOutPortLineEdit->text());
1884  settings.setValue("ephV3filenames", _ephV3filenameCheckBox->checkState());
1885  (_ephV3filenameCheckBox->checkState()) ?
1886    settings.setValue("ephV3",       _ephV3filenameCheckBox->checkState()) :
1887    settings.setValue("ephV3",       _ephV3CheckBox->checkState());
1888// Broadcast Corrections
1889  settings.setValue("corrPath",    _corrPathLineEdit->text());
1890  settings.setValue("corrIntr",    _corrIntrComboBox->currentText());
1891  settings.setValue("corrPort",    _corrPortLineEdit->text());
1892// Feed Engine
1893  settings.setValue("outPort",     _outPortLineEdit->text());
1894  settings.setValue("outWait",     _outWaitSpinBox->value());
1895  settings.setValue("outSampl",    _outSamplSpinBox->value());
1896  settings.setValue("outFile",     _outFileLineEdit->text());
1897  settings.setValue("outUPort",    _outUPortLineEdit->text());
1898// Serial Output
1899  settings.setValue("serialMountPoint",_serialMountPointLineEdit->text());
1900  settings.setValue("serialPortName",  _serialPortNameLineEdit->text());
1901  settings.setValue("serialBaudRate",  _serialBaudRateComboBox->currentText());
1902  settings.setValue("serialFlowControl",_serialFlowControlComboBox->currentText());
1903  settings.setValue("serialDataBits",  _serialDataBitsComboBox->currentText());
1904  settings.setValue("serialParity",    _serialParityComboBox->currentText());
1905  settings.setValue("serialStopBits",  _serialStopBitsComboBox->currentText());
1906  settings.setValue("serialAutoNMEA",  _serialAutoNMEAComboBox->currentText());
1907  settings.setValue("serialFileNMEA",    _serialFileNMEALineEdit->text());
1908  settings.setValue("serialHeightNMEA",  _serialHeightNMEALineEdit->text());
1909  settings.setValue("serialManualNMEASampling", _serialManualNMEASamplingSpinBox->value());
1910// Outages
1911  settings.setValue("adviseObsRate", _adviseObsRateComboBox->currentText());
1912  settings.setValue("adviseFail",    _adviseFailSpinBox->value());
1913  settings.setValue("adviseReco",    _adviseRecoSpinBox->value());
1914  settings.setValue("adviseScript",  _adviseScriptLineEdit->text());
1915// Miscellaneous
1916  settings.setValue("miscMount",   _miscMountLineEdit->text());
1917  settings.setValue("miscPort",    _miscPortLineEdit->text());
1918  settings.setValue("miscIntr",    _miscIntrComboBox->currentText());
1919  settings.setValue("miscScanRTCM", _miscScanRTCMCheckBox->checkState());
1920// Reqc
1921  settings.setValue("reqcAction",     _reqcActionComboBox->currentText());
1922  settings.setValue("reqcObsFile",    _reqcObsFileChooser->fileName());
1923  settings.setValue("reqcNavFile",    _reqcNavFileChooser->fileName());
1924  settings.setValue("reqcOutObsFile", _reqcOutObsLineEdit->text());
1925  settings.setValue("reqcOutNavFile", _reqcOutNavLineEdit->text());
1926  settings.setValue("reqcOutLogFile", _reqcOutLogLineEdit->text());
1927  settings.setValue("reqcPlotDir",    _reqcPlotDirLineEdit->text());
1928  settings.setValue("reqcSkyPlotSignals", _reqcSkyPlotSignals->text());
1929  settings.setValue("reqcLogSummaryOnly", _reqcLogSummaryOnly->checkState());
1930// SP3 Comparison
1931  settings.setValue("sp3CompFile",       _sp3CompFileChooser->fileName());
1932  settings.setValue("sp3CompExclude",    _sp3CompExclude->text());
1933  settings.setValue("sp3CompOutLogFile", _sp3CompLogLineEdit->text());
1934// Combine Corrections
1935  if (!cmbStreams.isEmpty()) {
1936    settings.setValue("cmbStreams", cmbStreams);
1937  }
1938  else {
1939    settings.setValue("cmbStreams", "");
1940  }
1941  settings.setValue("cmbMethod",     _cmbMethodComboBox->currentText());
1942  settings.setValue("cmbMaxres",     _cmbMaxresLineEdit->text());
1943  settings.setValue("cmbSampl",      _cmbSamplSpinBox->value());
1944  settings.setValue("cmbUseGlonass", _cmbUseGlonass->checkState());
1945// Upload Corrections
1946  if (!uploadMountpointsOut.isEmpty()) {
1947    settings.setValue("uploadMountpointsOut", uploadMountpointsOut);
1948  }
1949  else {
1950    settings.setValue("uploadMountpointsOut", "");
1951  }
1952  settings.setValue("uploadIntr",             _uploadIntrComboBox->currentText());
1953  settings.setValue("uploadSamplRtcmEphCorr", _uploadSamplRtcmEphCorrSpinBox->value());
1954  settings.setValue("uploadSamplSp3",         _uploadSamplSp3SpinBox->value());
1955  settings.setValue("uploadSamplClkRnx",      _uploadSamplClkRnxSpinBox->value());
1956  settings.setValue("uploadAntexFile",        _uploadAntexFile->fileName());
1957// Upload Ephemeris
1958  settings.setValue("uploadEphHost",      _uploadEphHostLineEdit->text());
1959  settings.setValue("uploadEphPort",      _uploadEphPortLineEdit->text());
1960  settings.setValue("uploadEphMountpoint",_uploadEphMountpointLineEdit->text());
1961  settings.setValue("uploadEphPassword",  _uploadEphPasswordLineEdit->text());
1962  settings.setValue("uploadEphSample",    _uploadEphSampleSpinBox->value());
1963
1964  if (_caster) {
1965    _caster->readMountPoints();
1966  }
1967
1968  _pppWidgets.saveOptions();
1969}
1970
1971// All get slots terminated
1972////////////////////////////////////////////////////////////////////////////
1973void bncWindow::slotGetThreadsFinished() {
1974  BNC_CORE->slotMessage("All Get Threads Terminated", true);
1975  delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
1976  delete _casterEph; _casterEph = 0;
1977  _runningRealTime = false;
1978}
1979
1980// Start It!
1981////////////////////////////////////////////////////////////////////////////
1982void bncWindow::slotStart() {
1983  saveOptions();
1984  if      ( _pppWidgets._dataSource->currentText() == "RINEX Files") {
1985    _runningPPP = true;
1986    enableStartStop();
1987    _caster = new bncCaster(); BNC_CORE->setCaster(_caster);
1988    BNC_CORE->startPPP();
1989    _bncFigurePPP->reset();
1990  }
1991  else if ( !_reqcActionComboBox->currentText().isEmpty() ) {
1992    if (_reqcActionComboBox->currentText() == "Analyze") {
1993      _runningQC = true;
1994      t_reqcAnalyze* reqcAnalyze = new t_reqcAnalyze(this);
1995      connect(reqcAnalyze, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
1996      reqcAnalyze->start();
1997    }
1998    else {
1999      _runningEdit = true;
2000      t_reqcEdit* reqcEdit = new t_reqcEdit(this);
2001      connect(reqcEdit, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2002      reqcEdit->start();
2003    }
2004    enableStartStop();
2005  }
2006  else if (!_sp3CompFileChooser->fileName().isEmpty()) {
2007    _runningSp3Comp = true;
2008    t_sp3Comp* sp3Comp = new t_sp3Comp(this);
2009    connect(sp3Comp, SIGNAL(finished()), this, SLOT(slotPostProcessingFinished()));
2010    sp3Comp->start();
2011    enableStartStop();
2012  }
2013  else {
2014    startRealTime();
2015    BNC_CORE->startPPP();
2016  }
2017}
2018
2019// Start Real-Time (Retrieve Data etc.)
2020////////////////////////////////////////////////////////////////////////////
2021void bncWindow::startRealTime() {
2022
2023  _runningRealTime = true;
2024
2025  _bncFigurePPP->reset();
2026
2027  _actDeleteMountPoints->setEnabled(false);
2028
2029  enableStartStop();
2030
2031  _caster = new bncCaster();
2032
2033  BNC_CORE->setCaster(_caster);
2034  BNC_CORE->setPortEph(_ephOutPortLineEdit->text().toInt());
2035  BNC_CORE->setPortCorr(_corrPortLineEdit->text().toInt());
2036  BNC_CORE->initCombination();
2037
2038  connect(_caster, SIGNAL(getThreadsFinished()),
2039          this, SLOT(slotGetThreadsFinished()));
2040
2041  connect (_caster, SIGNAL(mountPointsRead(QList<bncGetThread*>)),
2042           this, SLOT(slotMountPointsRead(QList<bncGetThread*>)));
2043
2044  BNC_CORE->slotMessage("========== Start BNC v" BNCVERSION" ("BNC_OS") ==========", true);
2045
2046  bncSettings settings;
2047
2048  // Active panels
2049  // -------------
2050  if (!_rnxPathLineEdit->text().isEmpty())
2051      BNC_CORE->slotMessage("Panel 'RINEX Observations' active", true);
2052  if (!_ephPathLineEdit->text().isEmpty())
2053      BNC_CORE->slotMessage("Panel 'RINEX Ephemeris' active", true);
2054  if (!_corrPathLineEdit->text().isEmpty())
2055      BNC_CORE->slotMessage("Panel 'Broadcast Corrections' active", true);
2056  if (!_outPortLineEdit->text().isEmpty())
2057      BNC_CORE->slotMessage("Panel 'Feed Engine' active", true);
2058  if (!_serialMountPointLineEdit->text().isEmpty())
2059      BNC_CORE->slotMessage("Panel 'Serial Output' active", true);
2060  if (!_adviseObsRateComboBox->currentText().isEmpty())
2061      BNC_CORE->slotMessage("Panel 'Outages' active", true);
2062  if (!_miscMountLineEdit->text().isEmpty())
2063      BNC_CORE->slotMessage("Panel 'Miscellaneous' active", true);
2064  if (_pppWidgets._dataSource->currentText() == "Real-Time Streams")
2065      BNC_CORE->slotMessage("Panel 'PPP' active", true);
2066  if (_cmbTable->rowCount() > 0)
2067      BNC_CORE->slotMessage("Panel 'Combine Corrections' active", true);
2068  if (_uploadTable->rowCount() > 0)
2069      BNC_CORE->slotMessage("Panel 'Upload Corrections' active", true);
2070  if (!_uploadEphHostLineEdit->text().isEmpty())
2071      BNC_CORE->slotMessage("Panel 'UploadEphemeris' active", true);
2072
2073  QDir rnxdir(settings.value("rnxPath").toString());
2074  if (!rnxdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations directory", true);
2075
2076  QString rnx_file = settings.value("rnxScript").toString();
2077  if ( !rnx_file.isEmpty() ) {
2078    QFile rnxfile(settings.value("rnxScript").toString());
2079    if (!rnxfile.exists()) BNC_CORE->slotMessage("Cannot find RINEX Observations script", true);
2080  }
2081
2082  QDir ephdir(settings.value("ephPath").toString());
2083  if (!ephdir.exists()) BNC_CORE->slotMessage("Cannot find RINEX Ephemeris directory", true);
2084
2085  QDir corrdir(settings.value("corrPath").toString());
2086  if (!corrdir.exists()) BNC_CORE->slotMessage("Cannot find Broadcast Corrections directory", true);
2087
2088  QString advise_file = settings.value("adviseScript").toString();
2089  if ( !advise_file.isEmpty() ) {
2090    QFile advisefile(settings.value("adviseScript").toString());
2091    if (!advisefile.exists()) BNC_CORE->slotMessage("Cannot find Outages script", true);
2092  }
2093
2094  _caster->readMountPoints();
2095
2096  _casterEph = new bncEphUploadCaster();
2097  connect(_casterEph, SIGNAL(newBytes(QByteArray,double)),
2098          _uploadEphBytesCounter, SLOT(slotNewBytes(QByteArray,double)));
2099}
2100
2101// Retrieve Data
2102////////////////////////////////////////////////////////////////////////////
2103void bncWindow::slotStop() {
2104  int iRet = QMessageBox::question(this, "Stop", "Stop retrieving/processing data?",
2105                                   QMessageBox::Yes, QMessageBox::No,
2106                                   QMessageBox::NoButton);
2107  if (iRet == QMessageBox::Yes) {
2108    BNC_CORE->stopPPP();
2109    BNC_CORE->stopCombination();
2110    delete _caster;    _caster    = 0; BNC_CORE->setCaster(0);
2111    delete _casterEph; _casterEph = 0;
2112    _runningRealTime = false;
2113    _runningPPP      = false;
2114    enableStartStop();
2115  }
2116}
2117
2118// Close Application gracefully
2119////////////////////////////////////////////////////////////////////////////
2120void bncWindow::closeEvent(QCloseEvent* event) {
2121
2122  int iRet = QMessageBox::question(this, "Close", "Save Options?",
2123                                   QMessageBox::Yes, QMessageBox::No,
2124                                   QMessageBox::Cancel);
2125
2126  if      (iRet == QMessageBox::Cancel) {
2127    event->ignore();
2128    return;
2129  }
2130  else if (iRet == QMessageBox::Yes) {
2131    slotSaveOptions();
2132  }
2133
2134  BNC_CORE->stopPPP();
2135
2136  QMainWindow::closeEvent(event);
2137}
2138
2139// User changed the selection of mountPoints
2140////////////////////////////////////////////////////////////////////////////
2141void bncWindow::slotSelectionChanged() {
2142  if (_mountPointsTable->selectedItems().isEmpty()) {
2143    _actDeleteMountPoints->setEnabled(false);
2144  }
2145  else {
2146    _actDeleteMountPoints->setEnabled(true);
2147  }
2148}
2149
2150// Display Program Messages
2151////////////////////////////////////////////////////////////////////////////
2152void bncWindow::slotWindowMessage(const QByteArray msg, bool showOnScreen) {
2153  if (showOnScreen ) {
2154    _log->append(QDateTime::currentDateTime().toUTC().toString("yy-MM-dd hh:mm:ss ") + msg);
2155  }
2156}
2157
2158// About Message
2159////////////////////////////////////////////////////////////////////////////
2160void bncWindow::slotAbout() {
2161 new bncAboutDlg(0);
2162}
2163
2164//Flowchart
2165////////////////////////////////////////////////////////////////////////////
2166void bncWindow::slotFlowchart() {
2167 new bncFlowchartDlg(0);
2168}
2169
2170// Help Window
2171////////////////////////////////////////////////////////////////////////////
2172void bncWindow::slotHelp() {
2173  QUrl url;
2174  url.setPath(":bnchelp.html");
2175  new bncHlpDlg(0, url);
2176}
2177
2178// Select Fonts
2179////////////////////////////////////////////////////////////////////////////
2180void bncWindow::slotFontSel() {
2181  bool ok;
2182  QFont newFont = QFontDialog::getFont(&ok, this->font(), this);
2183  if (ok) {
2184    bncSettings settings;
2185    settings.setValue("font", newFont.toString());
2186    QApplication::setFont(newFont);
2187    int ww = QFontMetrics(newFont).width('w');
2188    setMinimumSize(60*ww, 80*ww);
2189    resize(60*ww, 80*ww);
2190  }
2191}
2192
2193// Whats This Help
2194void bncWindow::slotWhatsThis() {
2195  QWhatsThis::enterWhatsThisMode();
2196}
2197
2198//
2199////////////////////////////////////////////////////////////////////////////
2200void bncWindow::slotMountPointsRead(QList<bncGetThread*> threads) {
2201  _threads = threads;
2202
2203  _bncFigure->updateMountPoints();
2204  _bncFigureLate->updateMountPoints();
2205
2206  populateMountPointsTable();
2207  bncSettings settings;
2208  _outSamplSpinBox->setValue(settings.value("outSampl").toInt());
2209  _outWaitSpinBox->setValue(settings.value("outWait").toInt());
2210  QListIterator<bncGetThread*> iTh(threads);
2211  while (iTh.hasNext()) {
2212    bncGetThread* thread = iTh.next();
2213    for (int iRow = 0; iRow < _mountPointsTable->rowCount(); iRow++) {
2214      QUrl url( "//" + _mountPointsTable->item(iRow, 0)->text() +
2215                "@"  + _mountPointsTable->item(iRow, 1)->text() );
2216      if (url                                      == thread->mountPoint() &&
2217          _mountPointsTable->item(iRow, 4)->text() == thread->latitude()   &&
2218          _mountPointsTable->item(iRow, 5)->text() == thread->longitude() ) {
2219        ((bncTableItem*) _mountPointsTable->item(iRow, 8))->setGetThread(thread);
2220        disconnect(thread, SIGNAL(newBytes(QByteArray, double)),
2221                  _bncFigure, SLOT(slotNewData(QByteArray, double)));
2222        connect(thread, SIGNAL(newBytes(QByteArray, double)),
2223                _bncFigure, SLOT(slotNewData(QByteArray, double)));
2224        disconnect(thread, SIGNAL(newLatency(QByteArray, double)),
2225                   _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2226        connect(thread, SIGNAL(newLatency(QByteArray, double)),
2227                _bncFigureLate, SLOT(slotNewLatency(QByteArray, double)));
2228        break;
2229      }
2230    }
2231  }
2232}
2233
2234//
2235////////////////////////////////////////////////////////////////////////////
2236void bncWindow::CreateMenu() {
2237  // Create Menus
2238  // ------------
2239  _menuFile = menuBar()->addMenu(tr("&File"));
2240  _menuFile->addAction(_actFontSel);
2241  _menuFile->addSeparator();
2242  _menuFile->addAction(_actSaveOpt);
2243  _menuFile->addSeparator();
2244  _menuFile->addAction(_actQuit);
2245
2246  _menuHlp = menuBar()->addMenu(tr("&Help"));
2247  _menuHlp->addAction(_actHelp);
2248  _menuHlp->addAction(_actFlowchart);
2249  _menuHlp->addAction(_actAbout);
2250}
2251
2252// Toolbar
2253////////////////////////////////////////////////////////////////////////////
2254void bncWindow::AddToolbar() {
2255  QToolBar* toolBar = new QToolBar;
2256  addToolBar(Qt::BottomToolBarArea, toolBar);
2257  toolBar->setMovable(false);
2258  toolBar->addAction(_actAddMountPoints);
2259  toolBar->addAction(_actDeleteMountPoints);
2260  toolBar->addAction(_actMapMountPoints);
2261  toolBar->addAction(_actStart);
2262  toolBar->addAction(_actStop);
2263  toolBar->addWidget(new QLabel("                                           "));
2264  toolBar->addAction(_actwhatsthis);
2265}
2266
2267// About
2268////////////////////////////////////////////////////////////////////////////
2269bncAboutDlg::bncAboutDlg(QWidget* parent) :
2270   QDialog(parent) {
2271
2272  QTextBrowser* tb = new QTextBrowser;
2273  QUrl url; url.setPath(":bncabout.html");
2274  tb->setSource(url);
2275  tb->setReadOnly(true);
2276
2277  int ww = QFontMetrics(font()).width('w');
2278  QPushButton* _closeButton = new QPushButton("Close");
2279  _closeButton->setMaximumWidth(10*ww);
2280  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2281
2282  QGridLayout* dlgLayout = new QGridLayout();
2283  QLabel* img = new QLabel();
2284  img->setPixmap(QPixmap(":ntrip-logo.png"));
2285  dlgLayout->addWidget(img, 0,0);
2286  dlgLayout->addWidget(new QLabel("BKG Ntrip Client (BNC) Version "BNCVERSION), 0,1);
2287  dlgLayout->addWidget(tb,1,0,1,2);
2288  dlgLayout->addWidget(_closeButton,2,1,Qt::AlignRight);
2289
2290  setLayout(dlgLayout);
2291  resize(60*ww, 60*ww);
2292  setWindowTitle("About BNC");
2293  show();
2294}
2295
2296//
2297////////////////////////////////////////////////////////////////////////////
2298bncAboutDlg::~bncAboutDlg() {
2299
2300};
2301
2302// Flowchart
2303////////////////////////////////////////////////////////////////////////////
2304bncFlowchartDlg::bncFlowchartDlg(QWidget* parent) :
2305   QDialog(parent) {
2306
2307  int ww = QFontMetrics(font()).width('w');
2308  QPushButton* _closeButton = new QPushButton("Close");
2309  _closeButton->setMaximumWidth(10*ww);
2310  connect(_closeButton, SIGNAL(clicked()), this, SLOT(close()));
2311
2312  QGridLayout* dlgLayout = new QGridLayout();
2313  QLabel* img = new QLabel();
2314  img->setPixmap(QPixmap(":bncflowchart.png"));
2315  dlgLayout->addWidget(img, 0,0);
2316  dlgLayout->addWidget(_closeButton,1,0,Qt::AlignLeft);
2317
2318  setLayout(dlgLayout);
2319  setWindowTitle("Flow Chart");
2320  show();
2321}
2322
2323//
2324////////////////////////////////////////////////////////////////////////////
2325bncFlowchartDlg::~bncFlowchartDlg() {
2326};
2327
2328// Enable/Disable Widget (and change its color)
2329////////////////////////////////////////////////////////////////////////////
2330void bncWindow::enableWidget(bool enable, QWidget* widget) {
2331
2332  const static QPalette paletteWhite(QColor(255, 255, 255));
2333  const static QPalette paletteGray(QColor(230, 230, 230));
2334
2335  widget->setEnabled(enable);
2336  if (enable) {
2337    widget->setPalette(paletteWhite);
2338  }
2339  else {
2340    widget->setPalette(paletteGray);
2341  }
2342}
2343
2344//  Bnc Text
2345////////////////////////////////////////////////////////////////////////////
2346void bncWindow::slotBncTextChanged(){
2347
2348  const static QPalette paletteWhite(QColor(255, 255, 255));
2349  const static QPalette paletteGray(QColor(230, 230, 230));
2350
2351  bool enable = true;
2352
2353  // Proxy
2354  //------
2355  if (sender() == 0 || sender() == _proxyHostLineEdit) {
2356    enable = !_proxyHostLineEdit->text().isEmpty();
2357    enableWidget(enable, _proxyPortLineEdit);
2358  }
2359
2360  // RINEX Observations
2361  // ------------------
2362  if (sender() == 0 || sender() == _rnxPathLineEdit) {
2363    enable = !_rnxPathLineEdit->text().isEmpty();
2364    enableWidget(enable, _rnxIntrComboBox);
2365    enableWidget(enable, _rnxSamplSpinBox);
2366    enableWidget(enable, _rnxSkelLineEdit);
2367    enableWidget(enable, _rnxFileCheckBox);
2368    enableWidget(enable, _rnxScrpLineEdit);
2369    enableWidget(enable, _rnxV2Priority);
2370    enableWidget(enable, _rnxV3CheckBox);
2371
2372    bool enable1 = true;
2373    enable1 = _rnxV3CheckBox->isChecked();
2374    if (enable && enable1) {
2375    enableWidget(false, _rnxV2Priority);
2376    }
2377    if (enable && !enable1) {
2378    enableWidget(true, _rnxV2Priority);
2379    }
2380  }
2381
2382  // RINEX Observations, Signal Priority
2383  // -----------------------------------
2384  if (sender() == 0 || sender() == _rnxV3CheckBox) {
2385    if (!_rnxPathLineEdit->text().isEmpty()) {
2386      enableWidget(enable, _rnxIntrComboBox);
2387      enable = !_rnxV3CheckBox->isChecked();
2388      enableWidget(enable, _rnxV2Priority);
2389    }
2390  }
2391
2392  // RINEX Ephemeris
2393  // ---------------
2394  if (sender() == 0 || sender() == _ephPathLineEdit || sender() == _ephOutPortLineEdit) {
2395    enable = !_ephPathLineEdit->text().isEmpty() || !_ephOutPortLineEdit->text().isEmpty();
2396    enableWidget(enable, _ephIntrComboBox);
2397    enableWidget(enable, _ephV3CheckBox);
2398    enableWidget(enable, _ephV3filenameCheckBox);
2399  }
2400
2401  // Broadcast Corrections
2402  // ---------------------
2403  if (sender() == 0 || sender() == _corrPathLineEdit || sender() == _corrPortLineEdit) {
2404    enable = !_corrPathLineEdit->text().isEmpty() || !_corrPortLineEdit->text().isEmpty();
2405    enableWidget(enable, _corrIntrComboBox);
2406  }
2407
2408  // Feed Engine
2409  // -----------
2410  if (sender() == 0 || sender() == _outPortLineEdit || sender() == _outFileLineEdit) {
2411    enable = !_outPortLineEdit->text().isEmpty() || !_outFileLineEdit->text().isEmpty();
2412    enableWidget(enable, _outWaitSpinBox);
2413    enableWidget(enable, _outSamplSpinBox);
2414  }
2415
2416  // Serial Output
2417  // -------------
2418  if (sender() == 0 || sender() == _serialMountPointLineEdit ||
2419      sender() == _serialAutoNMEAComboBox) {
2420    enable = !_serialMountPointLineEdit->text().isEmpty();
2421    enableWidget(enable, _serialPortNameLineEdit);
2422    enableWidget(enable, _serialBaudRateComboBox);
2423    enableWidget(enable, _serialParityComboBox);
2424    enableWidget(enable, _serialDataBitsComboBox);
2425    enableWidget(enable, _serialStopBitsComboBox);
2426    enableWidget(enable, _serialFlowControlComboBox);
2427    enableWidget(enable, _serialAutoNMEAComboBox);
2428    bool enable2 = enable && _serialAutoNMEAComboBox->currentText() == "Auto";
2429    enableWidget(enable2, _serialFileNMEALineEdit);
2430    bool enable3 = enable && _serialAutoNMEAComboBox->currentText().contains("Manual");
2431    enableWidget(enable3, _serialHeightNMEALineEdit);
2432    enableWidget(enable3, _serialManualNMEASamplingSpinBox);
2433  }
2434
2435  // Outages
2436  // -------
2437  if (sender() == 0 || sender() == _adviseObsRateComboBox) {
2438    enable = !_adviseObsRateComboBox->currentText().isEmpty();
2439    enableWidget(enable, _adviseFailSpinBox);
2440    enableWidget(enable, _adviseRecoSpinBox);
2441    enableWidget(enable, _adviseScriptLineEdit);
2442  }
2443
2444  // Miscellaneous
2445  // -------------
2446  if (sender() == 0 || sender() == _miscMountLineEdit) {
2447    enable = !_miscMountLineEdit->text().isEmpty();
2448    enableWidget(enable, _miscIntrComboBox);
2449    enableWidget(enable, _miscScanRTCMCheckBox);
2450    enableWidget(enable, _miscPortLineEdit);
2451  }
2452
2453  // Enable/disable Broadcast Ephemerides
2454  // ------------------------------------
2455  if (sender() == 0 || sender() == _uploadEphHostLineEdit) {
2456    enable = !_uploadEphHostLineEdit->text().isEmpty();
2457    enableWidget(enable, _uploadEphPortLineEdit);
2458    enableWidget(enable, _uploadEphMountpointLineEdit);
2459    enableWidget(enable, _uploadEphPasswordLineEdit);
2460    enableWidget(enable, _uploadEphSampleSpinBox);
2461  }
2462
2463  // Combine Corrections
2464  // -------------------
2465  if (sender() == 0 || sender() == _cmbTable) {
2466    int iRow = _cmbTable->rowCount();
2467    if (iRow > 0) {
2468      enableWidget(true, _cmbMethodComboBox);
2469      enableWidget(true, _cmbMaxresLineEdit);
2470      enableWidget(true, _cmbSamplSpinBox);
2471      enableWidget(true, _cmbUseGlonass);
2472    }
2473    else {
2474      enableWidget(false, _cmbMethodComboBox);
2475      enableWidget(false, _cmbMaxresLineEdit);
2476      enableWidget(false, _cmbSamplSpinBox);
2477      enableWidget(false, _cmbUseGlonass);
2478    }
2479  }
2480
2481  // Upload(clk)
2482  // -----------
2483  int iRow = _uploadTable->rowCount();
2484  if (iRow > 0) {
2485    enableWidget(true, _uploadIntrComboBox);
2486    enableWidget(true, _uploadSamplRtcmEphCorrSpinBox);
2487    enableWidget(true, _uploadSamplClkRnxSpinBox);
2488    enableWidget(true, _uploadSamplSp3SpinBox);
2489    enableWidget(true, _uploadAntexFile);
2490  }
2491  else {
2492    enableWidget(false, _uploadIntrComboBox);
2493    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2494    enableWidget(false, _uploadSamplClkRnxSpinBox);
2495    enableWidget(false, _uploadSamplSp3SpinBox);
2496    enableWidget(false, _uploadAntexFile);
2497  }
2498
2499  // QC
2500  // --
2501  if (sender() == 0 || sender() == _reqcActionComboBox || sender() == _reqcSkyPlotSignals) {
2502    enable = !_reqcActionComboBox->currentText().isEmpty();
2503    bool enable10   = _reqcActionComboBox->currentText() == "Edit/Concatenate";
2504//  bool enablePlot = !_reqcSkyPlotSignals->text().isEmpty();
2505    enableWidget(enable,                            _reqcObsFileChooser);
2506    enableWidget(enable,                            _reqcNavFileChooser);
2507    enableWidget(enable,                            _reqcOutLogLineEdit);
2508    enableWidget(enable &&  enable10,               _reqcEditOptionButton);
2509    enableWidget(enable &&  enable10,               _reqcOutObsLineEdit);
2510    enableWidget(enable &&  enable10,               _reqcOutNavLineEdit);
2511    enableWidget(enable && !enable10,               _reqcLogSummaryOnly);
2512    enableWidget(enable && !enable10,               _reqcSkyPlotSignals);
2513//  enableWidget(enable && !enable10 && enablePlot, _reqcPlotDirLineEdit);
2514    enableWidget(enable && !enable10,               _reqcPlotDirLineEdit);
2515  }
2516
2517  // SP3 File Comparison
2518  // -------------------
2519  if (sender() == 0 || sender() == _sp3CompFileChooser) {
2520    enable = !_sp3CompFileChooser->fileName().isEmpty();
2521    enableWidget(enable, _sp3CompLogLineEdit);
2522    enableWidget(enable, _sp3CompExclude);
2523  }
2524
2525  enableStartStop();
2526}
2527
2528//
2529////////////////////////////////////////////////////////////////////////////
2530void bncWindow::slotAddCmbRow() {
2531  int iRow = _cmbTable->rowCount();
2532  _cmbTable->insertRow(iRow);
2533  for (int iCol = 0; iCol < _cmbTable->columnCount(); iCol++) {
2534    _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2535  }
2536}
2537
2538//
2539////////////////////////////////////////////////////////////////////////////
2540void bncWindow::slotDelCmbRow() {
2541
2542  const static QPalette paletteWhite(QColor(255, 255, 255));
2543  const static QPalette paletteGray(QColor(230, 230, 230));
2544
2545  int nRows = _cmbTable->rowCount();
2546  bool flg[nRows];
2547  for (int iRow = 0; iRow < nRows; iRow++) {
2548    if (_cmbTable->isItemSelected(_cmbTable->item(iRow,1))) {
2549      flg[iRow] = true;
2550    }
2551    else {
2552      flg[iRow] = false;
2553    }
2554  }
2555  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2556    if (flg[iRow]) {
2557      _cmbTable->removeRow(iRow);
2558    }
2559  }
2560  nRows = _cmbTable->rowCount();
2561  if (nRows < 1) {
2562    enableWidget(false, _cmbMethodComboBox);
2563    enableWidget(false, _cmbMaxresLineEdit);
2564    enableWidget(false, _cmbSamplSpinBox);
2565    enableWidget(false, _cmbUseGlonass);
2566  }
2567}
2568
2569//
2570////////////////////////////////////////////////////////////////////////////
2571void bncWindow::populateCmbTable() {
2572
2573  for (int iRow = _cmbTable->rowCount()-1; iRow >=0; iRow--) {
2574    _cmbTable->removeRow(iRow);
2575  }
2576
2577  bncSettings settings;
2578
2579  int iRow = -1;
2580  QListIterator<QString> it(settings.value("cmbStreams").toStringList());
2581  while (it.hasNext()) {
2582    QStringList hlp = it.next().split(" ");
2583    if (hlp.size() > 2) {
2584      ++iRow;
2585      _cmbTable->insertRow(iRow);
2586    }
2587    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2588      _cmbTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2589    }
2590  }
2591}
2592
2593//
2594////////////////////////////////////////////////////////////////////////////
2595void bncWindow::slotAddUploadRow() {
2596  int iRow = _uploadTable->rowCount();
2597  _uploadTable->insertRow(iRow);
2598  for (int iCol = 0; iCol < _uploadTable->columnCount(); iCol++) {
2599    if      (iCol == 3) {
2600      QLineEdit* passwd = new QLineEdit();
2601      passwd->setFrame(false);
2602      passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2603      _uploadTable->setCellWidget(iRow, iCol, passwd);
2604    }
2605    else if (iCol == 4) {
2606      QComboBox* system = new QComboBox();
2607      system->setEditable(false);
2608      system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2609      system->setFrame(false);
2610      _uploadTable->setCellWidget(iRow, iCol, system);
2611    }
2612    else if (iCol == 5) {
2613      QCheckBox* com = new QCheckBox();
2614      _uploadTable->setCellWidget(iRow, iCol, com);
2615    }
2616    else if (iCol == 11) {
2617      bncTableItem* bncIt = new bncTableItem();
2618      bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2619      _uploadTable->setItem(iRow, iCol, bncIt);
2620      BNC_CORE->_uploadTableItems[iRow] = bncIt;
2621    }
2622    else {
2623      _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(""));
2624    }
2625  }
2626}
2627
2628//
2629////////////////////////////////////////////////////////////////////////////
2630void bncWindow::slotDelUploadRow() {
2631  BNC_CORE->_uploadTableItems.clear();
2632  int nRows = _uploadTable->rowCount();
2633  bool flg[nRows];
2634  for (int iRow = 0; iRow < nRows; iRow++) {
2635    if (_uploadTable->isItemSelected(_uploadTable->item(iRow,1))) {
2636      flg[iRow] = true;
2637    }
2638    else {
2639      flg[iRow] = false;
2640    }
2641  }
2642  for (int iRow = nRows-1; iRow >= 0; iRow--) {
2643    if (flg[iRow]) {
2644      _uploadTable->removeRow(iRow);
2645    }
2646  }
2647  for (int iRow = 0; iRow < _uploadTable->rowCount(); iRow++) {
2648    BNC_CORE->_uploadTableItems[iRow] =
2649                                (bncTableItem*) _uploadTable->item(iRow, 11);
2650  }
2651  nRows = _uploadTable->rowCount();
2652  if (nRows < 1) {
2653    enableWidget(false, _uploadIntrComboBox);
2654    enableWidget(false, _uploadSamplRtcmEphCorrSpinBox);
2655    enableWidget(false, _uploadSamplSp3SpinBox);
2656    enableWidget(false, _uploadSamplClkRnxSpinBox);
2657    enableWidget(false, _uploadAntexFile);
2658  }
2659}
2660
2661//
2662////////////////////////////////////////////////////////////////////////////
2663void bncWindow::populateUploadTable() {
2664  for (int iRow = _uploadTable->rowCount()-1; iRow >=0; iRow--) {
2665    _uploadTable->removeRow(iRow);
2666  }
2667
2668  bncSettings settings;
2669
2670  int iRow = -1;
2671  QListIterator<QString> it(settings.value("uploadMountpointsOut").toStringList());
2672  while (it.hasNext()) {
2673    QStringList hlp = it.next().split(",");
2674    if (hlp.size() > 6) {
2675      ++iRow;
2676      _uploadTable->insertRow(iRow);
2677    }
2678    for (int iCol = 0; iCol < hlp.size(); iCol++) {
2679      if      (iCol == 3) {
2680        QLineEdit* passwd = new QLineEdit();
2681        passwd->setFrame(false);
2682        passwd->setEchoMode(QLineEdit::PasswordEchoOnEdit);
2683        passwd->setText(hlp[iCol]);
2684        _uploadTable->setCellWidget(iRow, iCol, passwd);
2685      }
2686      else if (iCol == 4) {
2687        QComboBox* system = new QComboBox();
2688        system->setEditable(false);
2689        system->addItems(QString(",IGS08,ETRF2000,NAD83,GDA94,SIRGAS95,SIRGAS2000,DREF91,Custom").split(","));
2690        system->setFrame(false);
2691        system->setCurrentIndex(system->findText(hlp[iCol]));
2692        _uploadTable->setCellWidget(iRow, iCol, system);
2693      }
2694      else if (iCol == 5) {
2695        QCheckBox* com = new QCheckBox();
2696        if (hlp[iCol].toInt() == Qt::Checked) {
2697          com->setCheckState(Qt::Checked);
2698        }
2699        _uploadTable->setCellWidget(iRow, iCol, com);
2700      }
2701      else if (iCol == 11) {
2702        bncTableItem* bncIt = new bncTableItem();
2703        bncIt->setFlags(bncIt->flags() & ~Qt::ItemIsEditable);
2704        _uploadTable->setItem(iRow, iCol, bncIt);
2705        BNC_CORE->_uploadTableItems[iRow] = bncIt;
2706      }
2707      else {
2708        _uploadTable->setItem(iRow, iCol, new QTableWidgetItem(hlp[iCol]));
2709      }
2710    }
2711  }
2712}
2713
2714//
2715////////////////////////////////////////////////////////////////////////////
2716void bncWindow::slotSetUploadTrafo() {
2717  bncCustomTrafo* dlg = new bncCustomTrafo(this);
2718  dlg->exec();
2719  delete dlg;
2720}
2721
2722// Progress Bar Change
2723////////////////////////////////////////////////////////////////////////////
2724void bncWindow::slotPostProcessingProgress(int nEpo) {
2725  _actStart->setText(QString("%1 Epochs").arg(nEpo));
2726}
2727
2728// Post-Processing Reqc Finished
2729////////////////////////////////////////////////////////////////////////////
2730void bncWindow::slotPostProcessingFinished() {
2731  delete _caster; _caster = 0; BNC_CORE->setCaster(0);
2732  _runningPPP     = false;
2733  _runningEdit    = false;
2734  _runningQC      = false;
2735  _runningSp3Comp = false;
2736  _actStart->setText(tr("Sta&rt"));
2737  enableStartStop();
2738}
2739
2740// Edit teqc-like editing options
2741////////////////////////////////////////////////////////////////////////////
2742void bncWindow::slotReqcEditOption() {
2743  saveOptions();
2744  reqcDlg* dlg = new reqcDlg(this);
2745  dlg->move(this->pos().x()+50, this->pos().y()+50);
2746  dlg->exec();
2747  delete dlg;
2748}
2749
2750// Enable/Disable Start and Stop Buttons
2751////////////////////////////////////////////////////////////////////////////
2752void bncWindow::enableStartStop() {
2753  if ( running() ) {
2754    _actStart->setEnabled(false);
2755    if (_runningRealTime || _runningPPP) {
2756      _actStop->setEnabled(true);
2757    }
2758  }
2759  else {
2760    _actStart->setEnabled(true);
2761    _actStop->setEnabled(false);
2762  }
2763}
2764
2765// Show Map
2766////////////////////////////////////////////////////////////////////////////
2767void bncWindow::slotMapMountPoints() {
2768  saveOptions();
2769  t_bncMap* bncMap = new t_bncMap(this);
2770  bncMap->setMinimumSize(800, 600);
2771  bncMap->setWindowTitle("Selected Mountpoints");
2772
2773  bncSettings settings;
2774  QListIterator<QString> it(settings.value("mountPoints").toStringList());
2775  while (it.hasNext()) {
2776    QStringList hlp = it.next().split(" ");
2777    if (hlp.size() < 5) continue;
2778    QUrl   url(hlp[0]);
2779    double latDeg = hlp[3].toDouble();
2780    double lonDeg = hlp[4].toDouble();
2781    bncMap->slotNewPoint(QFileInfo(url.path()).fileName(), latDeg, lonDeg);
2782  }
2783
2784  bncMap->show();
2785}
2786
2787// Show Map
2788////////////////////////////////////////////////////////////////////////////
2789void bncWindow::slotMapPPP() {
2790#ifdef QT_WEBKIT
2791  saveOptions();
2792  enableWidget(false, _pppWidgets._mapWinButton);
2793  enableWidget(false, _pppWidgets._useGoogleMap);
2794  enableWidget(false, _pppWidgets._useOpenStreetMap);
2795  enableWidget(false, _pppWidgets._mapWinDotSize);
2796  enableWidget(false, _pppWidgets._mapWinDotColor);
2797
2798  if (!_mapWin) {
2799    _mapWin = new bncMapWin(this);
2800    connect(_mapWin, SIGNAL(mapClosed()), this, SLOT(slotMapPPPClosed()));
2801    connect(BNC_CORE, SIGNAL(newPosition(QByteArray, bncTime, QVector<double>)),
2802            _mapWin, SLOT(slotNewPosition(QByteArray, bncTime, QVector<double>)));
2803  }
2804  _mapWin->show();
2805#else
2806  QMessageBox::information(this, "Information",
2807                           "Qt Library compiled without QtWebKit");
2808#endif
2809}
2810
2811// Show Map
2812////////////////////////////////////////////////////////////////////////////
2813void bncWindow::slotMapPPPClosed() {
2814#ifdef QT_WEBKIT
2815  enableWidget(true, _pppWidgets._mapWinButton);
2816  enableWidget(true, _pppWidgets._useGoogleMap);
2817  enableWidget(true, _pppWidgets._useOpenStreetMap);
2818  enableWidget(true, _pppWidgets._mapWinDotSize);
2819  enableWidget(true, _pppWidgets._mapWinDotColor);
2820  if (_mapWin) {
2821    QListIterator<bncGetThread*> it(_threads);
2822    while (it.hasNext()) {
2823      bncGetThread* thread = it.next();
2824      thread->disconnect(_mapWin);
2825    }
2826    _mapWin->deleteLater();
2827    _mapWin = 0;
2828  }
2829#endif
2830}
Note: See TracBrowser for help on using the repository browser.