1 | --------------------------------------------------------------------------------
|
---|
2 | BNC VERSION 2.12.15 (??.11.2020)
|
---|
3 | --------------------------------------------------------------------------------
|
---|
4 | FIXED (03.11.2020): cleanup of the example configurations
|
---|
5 | ADDED (31.10.2020): ephemeris checks and related debugging output
|
---|
6 | ADDED (22.10.2020): check if orbit and clock corrections are out of range
|
---|
7 | FIXED (29.09.2020): small bugfixes regading long mountpoint names
|
---|
8 | in latency check and latency plots,
|
---|
9 | FIXED (29.09.2020): debug output deleted
|
---|
10 | FIXED (29.09.2020): bug in clock rinex header line
|
---|
11 | CHANGED (21.09.2020): cleanup of the relativistic effects w.r.t. IGS-SSR
|
---|
12 |
|
---|
13 | --------------------------------------------------------------------------------
|
---|
14 | BNC VERSION 2.12.14 (04.09.2020)
|
---|
15 | --------------------------------------------------------------------------------
|
---|
16 | CHANGED (02.09.2020): feed engine output format,
|
---|
17 | Lock Time Indicator is replaced by Cycle Slip Counter
|
---|
18 | ADDED (27.08.2020): encoding and decoding of IGS-SSR messages
|
---|
19 | ADDED (24.07.2020): B2b/7D BDS in signal mapping for MSM
|
---|
20 | CHANGED (24.07.2020): IRNSS experimental in official ephemeris message number
|
---|
21 |
|
---|
22 | --------------------------------------------------------------------------------
|
---|
23 | BNC VERSION 2.12.13 (09.06.2020)
|
---|
24 | --------------------------------------------------------------------------------
|
---|
25 | CHANGED (08.06.2020): BDS SSR IOD is changed from 24 into 8 bit with respect
|
---|
26 | to RTCM SSR proposal version 08
|
---|
27 | CHANGED (08.06.2020): BDS and QZSS SSR signal and tracking mode is adapted
|
---|
28 | with respect to RTCM SSR proposal version 08
|
---|
29 | FIXED (30.04.2020): QZSS fit Interval is specified as flag in RINEX 3.04
|
---|
30 |
|
---|
31 | --------------------------------------------------------------------------------
|
---|
32 | BNC VERSION 2.12.12 (21.01.2020)
|
---|
33 | --------------------------------------------------------------------------------
|
---|
34 | ADDED (21.11.2019): GPS and QZSS fit Interval in hours
|
---|
35 | CHAGED (20.11.2019): Epehmeris check
|
---|
36 |
|
---|
37 | --------------------------------------------------------------------------------
|
---|
38 | BNC VERSION 2.12.11 (08.11.2019)
|
---|
39 | --------------------------------------------------------------------------------
|
---|
40 | CHANGED (08.11.2019): Harmonization of RTCM3 Signal ID Mapping and
|
---|
41 | RTCM SSR Signal and Tracking Mode Identifiers
|
---|
42 | for BDS and QZSS
|
---|
43 |
|
---|
44 | --------------------------------------------------------------------------------
|
---|
45 | BNC VERSION 2.12.10 (02.10.2019)
|
---|
46 | --------------------------------------------------------------------------------
|
---|
47 | ADDED (23.09.2019): IRNSS ephemeris support in RTCM3 Encoder
|
---|
48 | ADDED (20.09.2019): IRNSS MSM and ephemeris support in RTCM3 Decoder
|
---|
49 | CHANGED (20.09.2019): RTCM signal mapping IDs for GLONASS
|
---|
50 | CHANGED (01.10.2019): RTCM signal mapping IDs for BDS
|
---|
51 | Basis: RTCM BDSWG proposal from 9/2019 as far as
|
---|
52 | consistent with RINEX version 3.04
|
---|
53 | CHANGED (20.09.2019): up to 64 BDS prn codes are supported now
|
---|
54 | FIXED (20.09.2019): multiple message indicator in SSR messages
|
---|
55 | FIXED (20.09.2019): GLONASS message frame time written into RINEX files
|
---|
56 |
|
---|
57 | --------------------------------------------------------------------------------
|
---|
58 | BNC VERSION 2.12.9 (20.05.2019)
|
---|
59 | --------------------------------------------------------------------------------
|
---|
60 | FIXED (17.05.2019): method to read the RTNET data buffer
|
---|
61 | FIXED (10.05.2019): typo in rtnet2ssr transition for ssr upload
|
---|
62 | CHANGED (13.05.2019): number of possible phase biases for ssr upload
|
---|
63 | are enlaged to 100
|
---|
64 | CHANGED (13.05.2019): default observation types for Galileo
|
---|
65 | CHANGED (10.05.2019): missing phase biases are added within
|
---|
66 | rtnet2ssr transition for ssr upload
|
---|
67 |
|
---|
68 | --------------------------------------------------------------------------------
|
---|
69 | BNC VERSION 2.12.8 (06.05.2019)
|
---|
70 | --------------------------------------------------------------------------------
|
---|
71 | CHANGED (06.05.2019): small but fine changes within the latency checker
|
---|
72 | CHANGED (03.05.2019): Transformation parameters from ITRF2014 into DFREF91
|
---|
73 | CHANGED (30.04.2019): Transformation parameters from ITRF2014 into ETRF2000
|
---|
74 | CHANGED (26.04.2019): GLONASS ephemerides validity is now up to 2 hours.
|
---|
75 | After that, they will be marked as outdated.
|
---|
76 | CHANGED (10.04.2019): Check with respect to wrong observation epochs
|
---|
77 | FIXED (29.04.2019): Bug with respect to GLONASS upload
|
---|
78 | FIXED (26.04.2019): Small Bug in NMEA output
|
---|
79 |
|
---|
80 | --------------------------------------------------------------------------------
|
---|
81 | BNC VERSION 2.12.7 (03.04.2019)
|
---|
82 | --------------------------------------------------------------------------------
|
---|
83 | ADDED (21.03.2019): Updates regarding RINEX Version 3.04
|
---|
84 | ADDED (28.02.2019): Lock time in seconds as an optional feed engine output
|
---|
85 | ADDED (27.09.2018): Possibility to request a user and password
|
---|
86 | detected sourcetable
|
---|
87 | ADDED (19.09.2018): Two more polynomial coefficients of the SSR clock correction
|
---|
88 | message and one more parameter to decribe the SSR URA
|
---|
89 | ADDED (11.12.2017): Decoding of receiver descriptor in MT 1033
|
---|
90 | ADDED (27.11.2017): Satellite health check
|
---|
91 | ADDED (26.10.2017): IRNSS support in RINEX QC
|
---|
92 | CHANGED (06.07.2018): Parameters for transformation of orbit and clock corrections
|
---|
93 | from ITRF 2014 into ETRF2000 and DREF 91,
|
---|
94 | no updated parameters for NDA83 available, hence deleted
|
---|
95 | CHANGED (28.06.2018): Allow 10 Hz observation data processing and re-sampling
|
---|
96 | harmonization of BNCs re-sampling applications
|
---|
97 | CHANGED (23.03.2018): SSR SBAS and BDS satellite IDs with respect to the proposal
|
---|
98 | CHANGED (28.09.2017): Transformation of orbit and clock corrections into ETRF2000,
|
---|
99 | NDA83 or DREF91 is done temporarily via ITRF2008
|
---|
100 | FIXED (29.03.2019): Bug in NMEA checksum
|
---|
101 | FIXED (25.03.2019): Bug in RINEX file concatention
|
---|
102 | FIXED (05.09.2018): Bug in RTCM3 ephemeris message for QZSS
|
---|
103 | FIXED (29.08.2018): Bug in RTCM3 ephemeris message for BDS and SBAS
|
---|
104 | FIXED (28.06.2018): RINEX version 3 filenames for re-sampled files
|
---|
105 | FIXED (11.06.2018): Bug in reqc ephemeris check
|
---|
106 | FIXED (18.05.2018): Bug in RINEX file concatenation
|
---|
107 | FIXED (18.05.2018): Bug in ephemeris upload
|
---|
108 | FIXED (29.03.2018): Bug in ephemeris check
|
---|
109 | FIXED (05.02.2018): Bug in latency check
|
---|
110 | FIXED (13.12.2017): Galileo geocentric gravitational constant is corrected
|
---|
111 | FIXED (17.11.2017): Encoding/decoding of all missing parameters in MT 1020
|
---|
112 | FIXED (23.10.2017): Bug in RTCM3 MSM Decoder
|
---|
113 | --------------------------------------------------------------------------------
|
---|
114 | BNC VERSION 2.12.6 (26.09.2017)
|
---|
115 | --------------------------------------------------------------------------------
|
---|
116 | FIXED (25.09.2017): GPS SSR Orbit IOD has to be GPS IODE, not IODC
|
---|
117 | --------------------------------------------------------------------------------
|
---|
118 | BNC VERSION 2.12.5 (30.08.2017)
|
---|
119 | --------------------------------------------------------------------------------
|
---|
120 | CHANGED (29.08.2017): RTCM message number for BDS is updated
|
---|
121 | --------------------------------------------------------------------------------
|
---|
122 | BNC VERSION 2.12.4 (10.04.2017)
|
---|
123 | --------------------------------------------------------------------------------
|
---|
124 | CHANGED (15.02.2017): SIRGAS2000 transformation parameters adjusted to IGb14
|
---|
125 | CHANGED (10.04.2017): Transformation parameters for ITRF2005 to GDA94 removed
|
---|
126 | CHANGED (10.04.2017): Transformation parameters for ITRF2008 to SIRGAS95 removed
|
---|
127 | CHANGED (10.04.2017): Transformation parameters for ITRF2014 to GDA2020 added
|
---|
128 | FIXED (10.04.2017): Minor bugs to prevent some irregular crashes of BNC
|
---|
129 | --------------------------------------------------------------------------------
|
---|
130 | BNC VERSION 2.12.3 (05.09.2016)
|
---|
131 | --------------------------------------------------------------------------------
|
---|
132 | ADDED (01.09.2016): Number of allowed SSR biases is enlarged, some future
|
---|
133 | GLONASS signal and tracking mode identifier are added
|
---|
134 | ADDED (08.08.2016): Some informations about the data source is added as
|
---|
135 | comment within the header of RINEX navigation files
|
---|
136 | ADDED (21.07.2016): Frequency specific signal priorities are added for
|
---|
137 | RINEX version 3 to RINEX version 2 conversion
|
---|
138 | ADDED (29.06.2016): Consideration of provioder ID changes in SSR streams
|
---|
139 | during PPP analysis
|
---|
140 | CHANGED (28.07.2016): Small adaptations in qwtpolar sources to allow a
|
---|
141 | successful comilation of BNC on a Rasperry Pi
|
---|
142 | CHANGED (21.07.2016): Default signal priority list
|
---|
143 | CHANGED (08.06.2016): Weighting factor for GLONASS phase observations
|
---|
144 | is now enlarged
|
---|
145 | CHANGED (27.05.2016): RINEX 2.11 ephemeris output for an unknown
|
---|
146 | transmission time is set to 0.000000000000e+00
|
---|
147 | CHANGED (24.05.2016): The real satellite visibility is considered, if the
|
---|
148 | expected observations are computed in RINEX QC
|
---|
149 | FIXED (12.08.2016): Check regarding wrong observation epochs is done during
|
---|
150 | latency check as well to prevent erroneous latencies
|
---|
151 | FIXED (08.06.2016): Map generation from sourcetable entry
|
---|
152 | FIXED (02.06.2016): the approach how to wait for clock corrections
|
---|
153 | in PPP mode, which was well proven in BNC verson 2.11
|
---|
154 | is re-implemented
|
---|
155 | FIXED (30.05.2016): Some NMEA components in PPP output are fixed:
|
---|
156 | time stamp is now UTC, hDop value instead pDop value
|
---|
157 |
|
---|
158 | --------------------------------------------------------------------------------
|
---|
159 | BNC VERSION 2.12.2 (18.05.2016)
|
---|
160 | --------------------------------------------------------------------------------
|
---|
161 | ADDED (18.05.2013): Expected observations in RINEX QC
|
---|
162 | ADDED (12.05.2016): Limits for spherical harmonics/degree order extended
|
---|
163 | FIXED (12.05.2016): Wrong RINEX v2 header line excluded
|
---|
164 |
|
---|
165 | --------------------------------------------------------------------------------
|
---|
166 | BNC VERSION 2.12.1 (21.04.2016)
|
---|
167 | --------------------------------------------------------------------------------
|
---|
168 | FIXED (21.04.2016): RINEX v2 file naming for observation files
|
---|
169 | CHANGED (21.04.2016): Release number is now part of BNC version
|
---|
170 |
|
---|
171 | --------------------------------------------------------------------------------
|
---|
172 | BNC VERSION 2.12.0 (19.04.2016)
|
---|
173 | --------------------------------------------------------------------------------
|
---|