| 1 | --------------------------------------------------------------------------------
|
|---|
| 2 | BNC VERSION 2.12.7 (13.02.2018)
|
|---|
| 3 | --------------------------------------------------------------------------------
|
|---|
| 4 | ADDED (11.12.2017): decoding of receiver descriptor in MT 1033
|
|---|
| 5 | ADDED (27.11.2017): satellite health check is added
|
|---|
| 6 | ADDED (26.10.2017): IRNSS support is added in RINEX QC
|
|---|
| 7 | CHANGED (28.09.2017): Transformation of orbit and clock corrections into ETRF2000,
|
|---|
| 8 | NDA83 or DREF91 is done temporarily via ITRF2008
|
|---|
| 9 | FIXED (22.03.2018): consideration of DF range 0-63 for SSR Satellite IDs as
|
|---|
| 10 | defined in DF463, DF466. First BDS or SBAS satellite is 0
|
|---|
| 11 | FIXED (05.02.2018): Bug in latency checker
|
|---|
| 12 | FIXED (13.12.2017): Galileo geocentric gravitational constant is corrected
|
|---|
| 13 | FIXED (17.11.2017): encoding/decoding of all missing parameters in MT 1020
|
|---|
| 14 | FIXED (23.10.2017): Bug in RTCM3 MSM Decoder
|
|---|
| 15 | --------------------------------------------------------------------------------
|
|---|
| 16 | BNC VERSION 2.12.6 (26.09.2017)
|
|---|
| 17 | --------------------------------------------------------------------------------
|
|---|
| 18 | FIXED (25.09.2017): GPS SSR Orbit IOD has to be GPS IODE, not IODC
|
|---|
| 19 | --------------------------------------------------------------------------------
|
|---|
| 20 | BNC VERSION 2.12.5 (30.08.2017)
|
|---|
| 21 | --------------------------------------------------------------------------------
|
|---|
| 22 | CHANGED (29.08.2017): RTCM message number for BDS is updated
|
|---|
| 23 | --------------------------------------------------------------------------------
|
|---|
| 24 | BNC VERSION 2.12.4 (10.04.2017)
|
|---|
| 25 | --------------------------------------------------------------------------------
|
|---|
| 26 | CHANGED (15.02.2017): SIRGAS2000 transformation parameters adjusted to IGb14
|
|---|
| 27 | CHANGED (10.04.2017): Transformation parameters for ITRF2005 to GDA94 removed
|
|---|
| 28 | CHANGED (10.04.2017): Transformation parameters for ITRF2008 to SIRGAS95 removed
|
|---|
| 29 | CHANGED (10.04.2017): Transformation parameters for ITRF2014 to GDA2020 added
|
|---|
| 30 | FIXED (10.04.2017): Minor bugs to prevent some irregular crashes of BNC
|
|---|
| 31 | --------------------------------------------------------------------------------
|
|---|
| 32 | BNC VERSION 2.12.3 (05.09.2016)
|
|---|
| 33 | --------------------------------------------------------------------------------
|
|---|
| 34 | ADDED (01.09.2016): number of allowed SSR biases is enlarged, some future
|
|---|
| 35 | GLONASS signal and tracking mode identifier are added
|
|---|
| 36 | ADDED (08.08.2016): some informations about the data source is added as
|
|---|
| 37 | comment within the header of RINEX navigation files
|
|---|
| 38 | ADDED (21.07.2016): frequency specific signal priorities are added for
|
|---|
| 39 | RINEX version 3 to RINEX version 2 conversion
|
|---|
| 40 | ADDED (29.06.2016): consideration of provioder ID changes in SSR streams
|
|---|
| 41 | during PPP analysis
|
|---|
| 42 | CHANGED (28.07.2016): small adaptations in qwtpolar sources to allow a
|
|---|
| 43 | successful comilation of BNC on a Rasperry Pi
|
|---|
| 44 | CHANGED (21.07.2016): Default signal priority list
|
|---|
| 45 | CHANGED (08.06.2016): weighting factor for GLONASS phase observations
|
|---|
| 46 | is now enlarged
|
|---|
| 47 | CHANGED (27.05.2016): RINEX 2.11 ephemeris output for an unknown
|
|---|
| 48 | transmission time is set to 0.000000000000e+00
|
|---|
| 49 | CHANGED (24.05.2016): the real satellite visibility is considered, if the
|
|---|
| 50 | expected observations are computed in RINEX QC
|
|---|
| 51 | FIXED (12.08.2016): check regarding wrong observation epochs is done during
|
|---|
| 52 | latency check as well to prevent erroneous latencies
|
|---|
| 53 | FIXED (08.06.2016): map generation from sourcetable entry
|
|---|
| 54 | FIXED (02.06.2016): the approach how to wait for clock corrections
|
|---|
| 55 | in PPP mode, which was well proven in BNC verson 2.11
|
|---|
| 56 | is re-implemented
|
|---|
| 57 | FIXED (30.05.2016): some NMEA components in PPP output are fixed:
|
|---|
| 58 | time stamp is now UTC, hDop value instead pDop value
|
|---|
| 59 |
|
|---|
| 60 | --------------------------------------------------------------------------------
|
|---|
| 61 | BNC VERSION 2.12.2 (18.05.2016)
|
|---|
| 62 | --------------------------------------------------------------------------------
|
|---|
| 63 | ADDED (18.05.2013): expected observations in RINEX QC
|
|---|
| 64 | ADDED (12.05.2016): limits for spherical harmonics/degree order extended
|
|---|
| 65 | FIXED (12.05.2016): wrong RINEX v2 header line excluded
|
|---|
| 66 |
|
|---|
| 67 | --------------------------------------------------------------------------------
|
|---|
| 68 | BNC VERSION 2.12.1 (21.04.2016)
|
|---|
| 69 | --------------------------------------------------------------------------------
|
|---|
| 70 | FIXED (21.04.2016): RINEX v2 file naming for observation files
|
|---|
| 71 | CHANGED (21.04.2016): release number is now part of BNC version
|
|---|
| 72 |
|
|---|
| 73 | --------------------------------------------------------------------------------
|
|---|
| 74 | BNC VERSION 2.12.0 (19.04.2016)
|
|---|
| 75 | --------------------------------------------------------------------------------
|
|---|
| 76 |
|
|---|
| 77 |
|
|---|
